Enerpac Tool GroupEPAC -0.20%76 Cyclically Adjusted PS Ratio is 2.75 as of Jul. 05, 2026, which is 90% above its 10-year median of 1.45. GuruFocus rates EPAC with a GF Score™ of 76/100 and a GF Value™ of $42.84 (Modestly Undervalued). Among 2,300 Industrial Products companies, Enerpac Tool Group ranks worse than 62.83% on this metric.
The historical rank and industry rank for Enerpac Tool Group's Cyclically Adjusted PS Ratio or its related term are showing as below:
EPAC'
s Cyclically Adjusted PS Ratio Range Over the Past 10 Years
Min: 0.87 Med: 1.45 Max: 3.52
Current: 2.76
During the past years, Enerpac Tool Group's highest Cyclically Adjusted PS Ratio was 3.52. The lowest was 0.87. And the median was 1.45.
EPAC's Cyclically Adjusted PS Ratio is ranked worse than 62.83% of 2300
companies
in the Industrial Products industry
Industry Median: 1.84
vs EPAC: 2.76
The Shiller PE Ratio was first used by professor Robert Shiller. He uses E10 for his Shiller PE Ratio calculation. E10 is the average of the inflation adjusted earnings per share of a company over the past 10 years. The similar calculation is applied by GuruFocus to calculate the Cyclically Adjusted PS Ratio. The Cyclically Adjusted Revenue per Share is the average of the inflation adjusted revenue per share of a company over the past 10 years.
Enerpac Tool Group's adjusted revenue per share data for the three months ended in Feb. 2026 was $2.960. Add all the adjusted revenue per share for the past 10 years together and divide 10 will get our Cyclically Adjusted Revenue per Share, which is $12.66 for the trailing ten years ended in Feb. 2026.
Shiller PE for Stocks: The True Measure of Stock Valuation
Enerpac Tool Group (NYSE:EPAC) Cyclically Adjusted PS Ratio Explanation
Compared with the regular PS Ratio, which works poorly for cyclical businesses, the Cyclically Adjusted PS Ratio smoothed out the fluctuations of revenue during business cycles. Therefore it is more accurate in reflecting the valuation of the company.
If a company has consistent business performance, the Cyclically Adjusted PS Ratio should give similar results to regular PS Ratio.
Enerpac Tool Group Cyclically Adjusted PS Ratio Related Terms
Enerpac Tool Group Cyclically Adjusted PS Ratio Historical Data
* Premium members only.
The historical data trend for Enerpac Tool Group's Cyclically Adjusted PS Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Enerpac Tool Group Cyclically Adjusted PS Ratio Chart
EPAC vs AMSC, BW, TNC: Cyclically Adjusted PS Ratio Comparison
For the Specialty Industrial Machinery subindustry, Enerpac Tool Group's Cyclically Adjusted PS Ratio, along with its competitors' market caps and Cyclically Adjusted PS Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Enerpac Tool Group Cyclically Adjusted PS Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Enerpac Tool Group's Cyclically Adjusted PS Ratio distribution charts can be found below:
* The bar in red indicates where Enerpac Tool Group's Cyclically Adjusted PS Ratio falls into.
Enerpac Tool Group Cyclically Adjusted PS Ratio Calculation
Like the Shiller PE Ratio, the Cyclically Adjusted PS Ratio takes the Revenue per Share from the past 10 years, adjusts it for inflation, and then calculates the average. This average is then used for the P/S calculation. Because it considers this 10-year average, it's often referred to as the CAPS Ratio.
The Shiller PE Ratio was first used by professor Robert Shiller to measure the valuation of the overall market. The similar calculation is applied by GuruFocus to calculate the Cyclically Adjusted PS Ratio.
Enerpac Tool Group's Cyclically Adjusted PS Ratio for today is calculated as
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Please note that we use the CPI data of the country/region where the company is headquartered. If the CPI data for that country/region is not available, then we will use the CPI data of the United States as default.
What does a Cyclically Adjusted PS Ratio of 2.75 mean?
Enerpac Tool Group (EPAC) has a Cyclically Adjusted PS Ratio of 2.75 as of Jul. 05, 2026. Cyclically Adjusted PS Ratio is the ratio of share price to a company's inflation-adjusted revenue per share over a 10-year period. View historical data on Enerpac Tool Group and its competitors. This is 90% above median its historical median of 1.45. Over the past decade, Enerpac Tool Group's Cyclically Adjusted PS Ratio has ranged from 0.87 to 3.52. According to the industry distribution chart, Enerpac Tool Group ranks #1445 out of 2300 companies in the Industrial Products industry, placing it in the top 62.8%.
Is Enerpac Tool Group's Cyclically Adjusted PS Ratio too high?
Enerpac Tool Group's current Cyclically Adjusted PS Ratio of 2.75 is 90% above median its 10-year median of 1.45. Over the past 10 years, this metric has ranged from a low of 0.87 to a high of 3.52. The Industrial Products industry median Cyclically Adjusted PS Ratio is 1.84. Enerpac Tool Group's value of 2.75 is 49.5% above this industry median. Based on the distribution chart, Enerpac Tool Group ranks #1445 out of 2300 companies in the Industrial Products industry, which is below the industry midpoint. Overall, Enerpac Tool Group has a GF Score™ of 76/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Enerpac Tool Group's Cyclically Adjusted PS Ratio compare to AMSC and BW?
According to the Industrial Products industry distribution chart, Enerpac Tool Group ranks #1445 out of 2300 companies for Cyclically Adjusted PS Ratio. This places Enerpac Tool Group in the lower half of its industry. The industry median Cyclically Adjusted PS Ratio is 1.84. Enerpac Tool Group's value of 2.75 is 49.5% above this benchmark. Historically, Enerpac Tool Group's own Cyclically Adjusted PS Ratio has ranged from 0.87 to 3.52 over the past decade. While the company's 10-year median is 1.45 vs. the industry median of 1.84, Enerpac Tool Group has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Cyclically Adjusted PS Ratio for an Industrial Products company?
The median Cyclically Adjusted PS Ratio among Industrial Products companies is 1.84, based on 2,300 companies in the industry. Companies in the top quartile (top 25%) have a Cyclically Adjusted PS Ratio significantly above this median, while those in the bottom quartile fall well below. However, Cyclically Adjusted PS Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Enerpac Tool Group's current Cyclically Adjusted PS Ratio of 2.75 is 49.5% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Cyclically Adjusted PS Ratio mean?
A high Cyclically Adjusted PS Ratio can signal that a stock is expensive relative to its fundamentals. Cyclically Adjusted PS Ratio is the ratio of share price to a company's inflation-adjusted revenue per share over a 10-year period. View historical data on Enerpac Tool Group and its competitors. For the Industrial Products industry, the median Cyclically Adjusted PS Ratio is 1.84 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Enerpac Tool Group's current Cyclically Adjusted PS Ratio is 2.75, which is 90% above median its own 10-year median of 1.45. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Enerpac Tool Group stock overvalued right now?
Based on GuruFocus' analysis, Enerpac Tool Group (EPAC) is currently considered Modestly Undervalued. The stock's GF Value™ is $42.84, compared to a current price of $34.87 — trading 18.6% below its estimated fair value. The current Cyclically Adjusted PS Ratio is 2.75, which is 90% above median its 10-year median of 1.45 and 49.5% above the Industrial Products industry median of 1.84. Enerpac Tool Group's overall GF Score™ is 76/100. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Cyclically Adjusted PS Ratio calculated?
Cyclically Adjusted PS Ratio is calculated from a company's financial statements. For Enerpac Tool Group (EPAC), the current Cyclically Adjusted PS Ratio is 2.75 as of Jul. 05, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Enerpac Tool Group (EPAC) Overvalued in 2026?
Based on GuruFocus' analysis, Enerpac Tool Group stock appears to be undervalued.
The current stock price of $34.87 is trading 18.6% below its estimated GF Value™ of $42.84.
GuruFocus considers Enerpac Tool Group to be Modestly Undervalued.
Key valuation signals for EPAC:
Cyclically Adjusted PS Ratio: 2.75 (90% above median its 10-year median of 1.45)
GF Value™: $42.84 vs. price of $34.87 (18.6% below fair value)
Industry Position: 49.5% above the Industrial Products median (#1445 of 2300)
No single metric tells the full story. See the EPAC stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Enerpac Tool Group Corp provides high-precision hydraulic and mechanical tools, controlled-force products, and heavy lifting solutions. Operating mainly through its Industrial Tools & Services (IT&S) segment, the company designs, manufactures, and distributes branded tools, and offers maintenance, bolting, machining, joint integrity, and equipment rental services across industries such as oil & gas, manufacturing, power generation, and infrastructure. Its key products include hydraulic cylinders, pumps, torque wrenches, and bolt tensioners under the brands ENERPAC and HYDRATIGHT. The company serves customers internationally, with operations in the USA, Australia, Brazil, Germany, Saudi Arabia, the United Kingdom, and other countries, deriving the majority of its revenue from the USA.
76GF Score
Get the complete analysis for EPAC
Cyclically Adjusted PS Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
EPAC has been successfully added to your 
