Enerpac Tool GroupEPAC -0.20%76 5-Year Yield-on-Cost % is 0.11 as of Jul. 05, 2026, which is 31% below its 10-year median of 0.16. GuruFocus rates EPAC with a GF Score™ of 76/100 and a GF Value™ of $42.84 (Modestly Undervalued). Among 1,926 Industrial Products companies, Enerpac Tool Group ranks worse than 95.79% on this metric.
Enerpac Tool Group's yield on cost for the quarter that ended in Feb. 2026 was 0.11.
The historical rank and industry rank for Enerpac Tool Group's 5-Year Yield-on-Cost % or its related term are showing as below:
EPAC'
s 5-Year Yield-on-Cost % Range Over the Past 10 Years
Min: 0.08 Med: 0.16 Max: 0.27
Current: 0.11
During the past 13 years, Enerpac Tool Group's highest Yield on Cost was 0.27. The lowest was 0.08. And the median was 0.16.
EPAC's 5-Year Yield-on-Cost % is ranked worse than 95.79% of 1926
companies
in the Industrial Products industry
Industry Median: 1.76
vs EPAC: 0.11
Enerpac Tool Group (NYSE:EPAC) 5-Year Yield-on-Cost % Explanation
Of course the risk here is that the company may not raise its dividends as it did before. The key is to select the companies that can consistently raise its dividends. Usually companies with long history of raising dividends tend to do so.
Enerpac Tool Group 5-Year Yield-on-Cost % Related Terms
EPAC vs AMSC, BW, TNC: 5-Year Yield-on-Cost % Comparison
For the Specialty Industrial Machinery subindustry, Enerpac Tool Group's 5-Year Yield-on-Cost %, along with its competitors' market caps and 5-Year Yield-on-Cost % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Enerpac Tool Group 5-Year Yield-on-Cost % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Enerpac Tool Group's 5-Year Yield-on-Cost % distribution charts can be found below:
* The bar in red indicates where Enerpac Tool Group's 5-Year Yield-on-Cost % falls into.
Enerpac Tool Group 5-Year Yield-on-Cost % Calculation
Dividend Yield % and dividend growth of a stock is an important factor for income investors. But if company A raises its dividend constantly faster than company B, company A's future dividend yield might be much higher than Company B's even if their yields are the same now and their stock prices do not change.
Yield on Cost assumes that you buy and the stock today, and hold it for 5 years. If the company raises it dividends at the same rate as it did over the past 5 years, the dividends investors receive annually in 5 years relative to the stock price today.
Enerpac Tool Group (EPAC) has a 5-Year Yield-on-Cost % of 0.11 as of Jul. 05, 2026. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Enerpac Tool Group and its competitors. This is 31% below median its historical median of 0.16. Over the past decade, Enerpac Tool Group's 5-Year Yield-on-Cost % has ranged from 0.08 to 0.27. According to the industry distribution chart, Enerpac Tool Group ranks #1845 out of 1926 companies in the Industrial Products industry, placing it in the top 95.8%.
Is Enerpac Tool Group's 5-Year Yield-on-Cost % too high?
Enerpac Tool Group's current 5-Year Yield-on-Cost % of 0.11 is 31% below median its 10-year median of 0.16. Over the past 10 years, this metric has ranged from a low of 0.08 to a high of 0.27. The Industrial Products industry median 5-Year Yield-on-Cost % is 1.76. Enerpac Tool Group's value of 0.11 is 93.8% below this industry median. Based on the distribution chart, Enerpac Tool Group ranks #1845 out of 1926 companies in the Industrial Products industry, which is in the bottom quartile relative to peers. Overall, Enerpac Tool Group has a GF Score™ of 76/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Enerpac Tool Group's 5-Year Yield-on-Cost % compare to AMSC and BW?
According to the Industrial Products industry distribution chart, Enerpac Tool Group ranks #1845 out of 1926 companies for 5-Year Yield-on-Cost %. This places Enerpac Tool Group in the lower half of its industry. The industry median 5-Year Yield-on-Cost % is 1.76. Enerpac Tool Group's value of 0.11 is 93.8% below this benchmark. Historically, Enerpac Tool Group's own 5-Year Yield-on-Cost % has ranged from 0.08 to 0.27 over the past decade. While the company's 10-year median is 0.16 vs. the industry median of 1.76, Enerpac Tool Group has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good 5-Year Yield-on-Cost % for an Industrial Products company?
The median 5-Year Yield-on-Cost % among Industrial Products companies is 1.76, based on 1,926 companies in the industry. Companies in the top quartile (top 25%) have a 5-Year Yield-on-Cost % significantly above this median, while those in the bottom quartile fall well below. However, 5-Year Yield-on-Cost % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Enerpac Tool Group's current 5-Year Yield-on-Cost % of 0.11 is 93.8% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high 5-Year Yield-on-Cost % mean?
A high 5-Year Yield-on-Cost % can signal that a stock is expensive relative to its fundamentals. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Enerpac Tool Group and its competitors. For the Industrial Products industry, the median 5-Year Yield-on-Cost % is 1.76 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Enerpac Tool Group's current 5-Year Yield-on-Cost % is 0.11, which is 31% below median its own 10-year median of 0.16. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Enerpac Tool Group stock overvalued right now?
Based on GuruFocus' analysis, Enerpac Tool Group (EPAC) is currently considered Modestly Undervalued. The stock's GF Value™ is $42.84, compared to a current price of $34.87 — trading 18.6% below its estimated fair value. The current 5-Year Yield-on-Cost % is 0.11, which is 31% below median its 10-year median of 0.16 and 93.8% below the Industrial Products industry median of 1.76. Enerpac Tool Group's overall GF Score™ is 76/100. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is 5-Year Yield-on-Cost % calculated?
5-Year Yield-on-Cost % is calculated from a company's financial statements. For Enerpac Tool Group (EPAC), the current 5-Year Yield-on-Cost % is 0.11 as of Jul. 05, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Enerpac Tool Group (EPAC) Overvalued in 2026?
Based on GuruFocus' analysis, Enerpac Tool Group stock appears to be undervalued.
The current stock price of $34.87 is trading 18.6% below its estimated GF Value™ of $42.84.
GuruFocus considers Enerpac Tool Group to be Modestly Undervalued.
Key valuation signals for EPAC:
5-Year Yield-on-Cost %: 0.11 (31% below median its 10-year median of 0.16)
GF Value™: $42.84 vs. price of $34.87 (18.6% below fair value)
Industry Position: 93.8% below the Industrial Products median (#1845 of 1926)
No single metric tells the full story. See the EPAC stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Enerpac Tool Group Corp provides high-precision hydraulic and mechanical tools, controlled-force products, and heavy lifting solutions. Operating mainly through its Industrial Tools & Services (IT&S) segment, the company designs, manufactures, and distributes branded tools, and offers maintenance, bolting, machining, joint integrity, and equipment rental services across industries such as oil & gas, manufacturing, power generation, and infrastructure. Its key products include hydraulic cylinders, pumps, torque wrenches, and bolt tensioners under the brands ENERPAC and HYDRATIGHT. The company serves customers internationally, with operations in the USA, Australia, Brazil, Germany, Saudi Arabia, the United Kingdom, and other countries, deriving the majority of its revenue from the USA.
76GF Score
Get the complete analysis for EPAC
5-Year Yield-on-Cost % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
EPAC has been successfully added to your 