Enerpac Tool GroupEPAC +4.00%74 Debt-to-EBITDA is 1.02 as of May. 2026, which is 56% below its 10-year median of 2.33. GuruFocus rates EPAC with a GF Score™ of 74/100 and a GF Value™ of $43.25 (Modestly Undervalued). Among 2,333 Industrial Products companies, Enerpac Tool Group ranks better than 58.25% on this metric.
Debt-to-EBITDA measures a company's ability to pay off its debt.
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt. According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
The historical rank and industry rank for Enerpac Tool Group's Debt-to-EBITDA or its related term are showing as below:
EPAC'
s Debt-to-EBITDA Range Over the Past 10 Years
Min: -10.79 Med: 2.33 Max: 7.56
Current: 1.23
During the past 13 years, the highest Debt-to-EBITDA Ratio of Enerpac Tool Group was 7.56. The lowest was -10.79. And the median was 2.33.
EPAC's Debt-to-EBITDA is ranked better than 58.25% of 2333
companies
in the Industrial Products industry
Industry Median: 1.7
vs EPAC: 1.23
Enerpac Tool Group (NYSE:EPAC) Debt-to-EBITDA Explanation
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt.
According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
Enerpac Tool Group Debt-to-EBITDA Related Terms
Enerpac Tool Group Debt-to-EBITDA Historical Data
* Premium members only.
The historical data trend for Enerpac Tool Group's Debt-to-EBITDA can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Specialty Industrial Machinery subindustry, Enerpac Tool Group's Debt-to-EBITDA, along with its competitors' market caps and Debt-to-EBITDA data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Enerpac Tool Group Debt-to-EBITDA vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Enerpac Tool Group's Debt-to-EBITDA distribution charts can be found below:
* The bar in red indicates where Enerpac Tool Group's Debt-to-EBITDA falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual Debt-to-EBITDA, the EBITDA of the last fiscal year is used. In calculating the annualized quarterly data,
the EBITDA data used here is four times the quarterly (May. 2026) EBITDA data.
Enerpac Tool Group (EPAC) has a Debt-to-EBITDA of 1.02 as of May. 2026. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Enerpac Tool Group. This is 56% below median its historical median of 2.33. According to the industry distribution chart, Enerpac Tool Group ranks #974 out of 2333 companies in the Industrial Products industry, placing it in the top 41.7%.
Is Enerpac Tool Group's Debt-to-EBITDA too high?
Enerpac Tool Group's current Debt-to-EBITDA of 1.02 is 56% below median its 10-year median of 2.33. The Industrial Products industry median Debt-to-EBITDA is 1.70. Enerpac Tool Group's value of 1.02 is 40% below this industry median. Based on the distribution chart, Enerpac Tool Group ranks #974 out of 2333 companies in the Industrial Products industry, which is above the industry midpoint. Overall, Enerpac Tool Group has a GF Score™ of 74/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Enerpac Tool Group's Debt-to-EBITDA compare to AMSC and BW?
According to the Industrial Products industry distribution chart, Enerpac Tool Group ranks #974 out of 2333 companies for Debt-to-EBITDA. This puts Enerpac Tool Group in the upper half of its industry. The industry median Debt-to-EBITDA is 1.70. Enerpac Tool Group's value of 1.02 is 40% below this benchmark. While the company's 10-year median is 2.33 vs. the industry median of 1.70, Enerpac Tool Group has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Debt-to-EBITDA for an Industrial Products company?
The median Debt-to-EBITDA among Industrial Products companies is 1.70, based on 2,333 companies in the industry. Companies in the top quartile (top 25%) have a Debt-to-EBITDA significantly above this median, while those in the bottom quartile fall well below. However, Debt-to-EBITDA should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Enerpac Tool Group's current Debt-to-EBITDA of 1.02 is 40% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Debt-to-EBITDA mean?
A high Debt-to-EBITDA can signal that a stock is expensive relative to its fundamentals. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Enerpac Tool Group. For the Industrial Products industry, the median Debt-to-EBITDA is 1.70 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Enerpac Tool Group's current Debt-to-EBITDA is 1.02, which is 56% below median its own 10-year median of 2.33. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Enerpac Tool Group stock overvalued right now?
Based on GuruFocus' analysis, Enerpac Tool Group (EPAC) is currently considered Modestly Undervalued. The stock's GF Value™ is $43.25, compared to a current price of $35.13 — trading 18.8% below its estimated fair value. The current Debt-to-EBITDA is 1.02, which is 56% below median its 10-year median of 2.33 and 40% below the Industrial Products industry median of 1.70. Enerpac Tool Group's overall GF Score™ is 74/100. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Debt-to-EBITDA calculated?
Debt-to-EBITDA is calculated from a company's financial statements. For Enerpac Tool Group (EPAC), the current Debt-to-EBITDA is 1.02 as of May. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Enerpac Tool Group (EPAC) Overvalued in 2026?
Based on GuruFocus' analysis, Enerpac Tool Group stock appears to be undervalued.
The current stock price of $35.13 is trading 18.8% below its estimated GF Value™ of $43.25.
GuruFocus considers Enerpac Tool Group to be Modestly Undervalued.
Key valuation signals for EPAC:
Debt-to-EBITDA: 1.02 (56% below median its 10-year median of 2.33)
GF Value™: $43.25 vs. price of $35.13 (18.8% below fair value)
Industry Position: 40% below the Industrial Products median (#974 of 2333)
No single metric tells the full story. See the EPAC stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Enerpac Tool Group Corp provides high-precision hydraulic and mechanical tools, controlled-force products, and heavy lifting solutions. Operating mainly through its Industrial Tools & Services (IT&S) segment, the company designs, manufactures, and distributes branded tools, and offers maintenance, bolting, machining, joint integrity, and equipment rental services across industries such as oil & gas, manufacturing, power generation, and infrastructure. Its key products include hydraulic cylinders, pumps, torque wrenches, and bolt tensioners under the brands ENERPAC and HYDRATIGHT. The company serves customers internationally, with operations in the USA, Australia, Brazil, Germany, Saudi Arabia, the United Kingdom, and other countries, deriving the majority of its revenue from the USA.
74GF Score
Get the complete analysis for EPAC
Debt-to-EBITDA is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
EPAC has been successfully added to your 
