China SteelTPE:2002 -2.11%67 Cyclically Adjusted PS Ratio is 0.66 as of Jul. 08, 2026, which is 30% below its 10-year median of 0.94. GuruFocus rates TPE:2002 with a GF Score™ of 67/100 and a GF Value™ of NT$20.91 (Modestly Undervalued). The stock has 7 warning signs investors should review. Among 515 Steel companies, China Steel ranks worse than 61.36% on this metric.
The historical rank and industry rank for China Steel's Cyclically Adjusted PS Ratio or its related term are showing as below:
TPE:2002'
s Cyclically Adjusted PS Ratio Range Over the Past 10 Years
Min: 0.63 Med: 0.94 Max: 1.68
Current: 0.67
During the past years, China Steel's highest Cyclically Adjusted PS Ratio was 1.68. The lowest was 0.63. And the median was 0.94.
TPE:2002's Cyclically Adjusted PS Ratio is ranked worse than 61.36% of 515
companies
in the Steel industry
Industry Median: 0.45
vs TPE:2002: 0.67
The Shiller PE Ratio was first used by professor Robert Shiller. He uses E10 for his Shiller PE Ratio calculation. E10 is the average of the inflation adjusted earnings per share of a company over the past 10 years. The similar calculation is applied by GuruFocus to calculate the Cyclically Adjusted PS Ratio. The Cyclically Adjusted Revenue per Share is the average of the inflation adjusted revenue per share of a company over the past 10 years.
China Steel's adjusted revenue per share data for the three months ended in Dec. 2025 was NT$4.945. Add all the adjusted revenue per share for the past 10 years together and divide 10 will get our Cyclically Adjusted Revenue per Share, which is NT$28.08 for the trailing ten years ended in Dec. 2025.
Shiller PE for Stocks: The True Measure of Stock Valuation
China Steel (TPE:2002) Cyclically Adjusted PS Ratio Explanation
Compared with the regular PS Ratio, which works poorly for cyclical businesses, the Cyclically Adjusted PS Ratio smoothed out the fluctuations of revenue during business cycles. Therefore it is more accurate in reflecting the valuation of the company.
If a company has consistent business performance, the Cyclically Adjusted PS Ratio should give similar results to regular PS Ratio.
China Steel Cyclically Adjusted PS Ratio Related Terms
China Steel Cyclically Adjusted PS Ratio Historical Data
* Premium members only.
The historical data trend for China Steel's Cyclically Adjusted PS Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
TPE:2002 vs NUE, STLD, RS: Cyclically Adjusted PS Ratio Comparison
For the Steel subindustry, China Steel's Cyclically Adjusted PS Ratio, along with its competitors' market caps and Cyclically Adjusted PS Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
China Steel Cyclically Adjusted PS Ratio vs Steel Industry
For the Steel industry and Basic Materials sector, China Steel's Cyclically Adjusted PS Ratio distribution charts can be found below:
* The bar in red indicates where China Steel's Cyclically Adjusted PS Ratio falls into.
China Steel Cyclically Adjusted PS Ratio Calculation
Like the Shiller PE Ratio, the Cyclically Adjusted PS Ratio takes the Revenue per Share from the past 10 years, adjusts it for inflation, and then calculates the average. This average is then used for the P/S calculation. Because it considers this 10-year average, it's often referred to as the CAPS Ratio.
The Shiller PE Ratio was first used by professor Robert Shiller to measure the valuation of the overall market. The similar calculation is applied by GuruFocus to calculate the Cyclically Adjusted PS Ratio.
China Steel's Cyclically Adjusted PS Ratio for today is calculated as
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Please note that we use the CPI data of the country/region where the company is headquartered. If the CPI data for that country/region is not available, then we will use the CPI data of the United States as default.
What does a Cyclically Adjusted PS Ratio of 0.66 mean?
China Steel (TPE:2002) has a Cyclically Adjusted PS Ratio of 0.66 as of Jul. 08, 2026. Cyclically Adjusted PS Ratio is the ratio of share price to a company's inflation-adjusted revenue per share over a 10-year period. View historical data on China Steel and its competitors. This is 30% below median its historical median of 0.94. Over the past decade, China Steel's Cyclically Adjusted PS Ratio has ranged from 0.63 to 1.68. According to the industry distribution chart, China Steel ranks #316 out of 515 companies in the Steel industry, placing it in the top 61.4%.
Is China Steel's Cyclically Adjusted PS Ratio too high?
China Steel's current Cyclically Adjusted PS Ratio of 0.66 is 30% below median its 10-year median of 0.94. Over the past 10 years, this metric has ranged from a low of 0.63 to a high of 1.68. The Steel industry median Cyclically Adjusted PS Ratio is 0.45. China Steel's value of 0.66 is 46.7% above this industry median. Based on the distribution chart, China Steel ranks #316 out of 515 companies in the Steel industry, which is below the industry midpoint. Overall, China Steel has a GF Score™ of 67/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does China Steel's Cyclically Adjusted PS Ratio compare to NUE and STLD?
According to the Steel industry distribution chart, China Steel ranks #316 out of 515 companies for Cyclically Adjusted PS Ratio. This places China Steel in the lower half of its industry. The industry median Cyclically Adjusted PS Ratio is 0.45. China Steel's value of 0.66 is 46.7% above this benchmark. Historically, China Steel's own Cyclically Adjusted PS Ratio has ranged from 0.63 to 1.68 over the past decade. While the company's 10-year median is 0.94 vs. the industry median of 0.45, China Steel has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Cyclically Adjusted PS Ratio for a Steel company?
The median Cyclically Adjusted PS Ratio among Steel companies is 0.45, based on 515 companies in the industry. Companies in the top quartile (top 25%) have a Cyclically Adjusted PS Ratio significantly above this median, while those in the bottom quartile fall well below. However, Cyclically Adjusted PS Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. China Steel's current Cyclically Adjusted PS Ratio of 0.66 is 46.7% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Cyclically Adjusted PS Ratio mean?
A high Cyclically Adjusted PS Ratio can signal that a stock is expensive relative to its fundamentals. Cyclically Adjusted PS Ratio is the ratio of share price to a company's inflation-adjusted revenue per share over a 10-year period. View historical data on China Steel and its competitors. For the Steel industry, the median Cyclically Adjusted PS Ratio is 0.45 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. China Steel's current Cyclically Adjusted PS Ratio is 0.66, which is 30% below median its own 10-year median of 0.94. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is China Steel stock overvalued right now?
Based on GuruFocus' analysis, China Steel (TPE:2002) is currently considered Modestly Undervalued. The stock's GF Value™ is NT$20.91, compared to a current price of NT$18.60 — trading 11% below its estimated fair value. The current Cyclically Adjusted PS Ratio is 0.66, which is 30% below median its 10-year median of 0.94 and 46.7% above the Steel industry median of 0.45. China Steel's overall GF Score™ is 67/100 with 7 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Cyclically Adjusted PS Ratio calculated?
Cyclically Adjusted PS Ratio is calculated from a company's financial statements. For China Steel (TPE:2002), the current Cyclically Adjusted PS Ratio is 0.66 as of Jul. 08, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is China Steel (TPE:2002) Overvalued in 2026?
Based on GuruFocus' analysis, China Steel stock appears to be undervalued.
The current stock price of NT$18.60 is trading 11% below its estimated GF Value™ of NT$20.91.
GuruFocus considers China Steel to be Modestly Undervalued.
Key valuation signals for TPE:2002:
Cyclically Adjusted PS Ratio: 0.66 (30% below median its 10-year median of 0.94)
GF Value™: NT$20.91 vs. price of NT$18.60 (11% below fair value)
Industry Position: 46.7% above the Steel median (#316 of 515)
No single metric tells the full story. See the TPE:2002 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
China Steel Corp is a steelmaker in Taiwan. It manufactures and sells steel products and engages in mechanical, communications, and electrical engineering. The company's product portfolio includes plates, bars, wire rods, hot and cold rolled coils, electro-galvanized coils, electrical steel coils, and hot-dip galvanized coils. Along with its subsidiaries, the company operates in the following reportable segments: Steel Department and Non-Steel Department. A majority of its revenue is generated from the Steel department segment, which manufactures and sells steel products. Geographically, the company derives maximum revenue from Taiwan, followed by Vietnam, Malaysia, India, China, and other regions.
67GF Score
Get the complete analysis for TPE:2002
Cyclically Adjusted PS Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:2002 has been successfully added to your 
