Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Asahi-Seiki Manufacturing CoNGO:6111 -0.25%55 Debt-to-EBITDA is 1.17 as of Mar. 2026, which is 16% below its 10-year median of 1.39. GuruFocus rates NGO:6111 with a GF Score™ of 55/100 and a GF Value™ of 円2,405.80 (Modestly Undervalued). The stock has 3 warning signs investors should review. Among 2,348 Industrial Products companies, Asahi-Seiki Manufacturing Co ranks worse than 60.22% on this metric.
Debt-to-EBITDA measures a company's ability to pay off its debt.
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt. According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
The historical rank and industry rank for Asahi-Seiki Manufacturing Co's Debt-to-EBITDA or its related term are showing as below:
NGO:6111'
s Debt-to-EBITDA Range Over the Past 10 Years
Min: 0.5 Med: 1.39 Max: 2.39
Current: 2.39
During the past 13 years, the highest Debt-to-EBITDA Ratio of Asahi-Seiki Manufacturing Co was 2.39. The lowest was 0.50. And the median was 1.39.
NGO:6111's Debt-to-EBITDA is ranked worse than 60.22% of 2348
companies
in the Industrial Products industry
Industry Median: 1.68
vs NGO:6111: 2.39
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt.
According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
Asahi-Seiki Manufacturing Co Debt-to-EBITDA Related Terms
Asahi-Seiki Manufacturing Co Debt-to-EBITDA Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
NGO:6111 vs CRS, ATI, MLI: Debt-to-EBITDA Comparison
For the Metal Fabrication subindustry, Asahi-Seiki Manufacturing Co's Debt-to-EBITDA, along with its competitors' market caps and Debt-to-EBITDA data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Asahi-Seiki Manufacturing Co Debt-to-EBITDA vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Asahi-Seiki Manufacturing Co's Debt-to-EBITDA distribution charts can be found below:
* The bar in red indicates where Asahi-Seiki Manufacturing Co's Debt-to-EBITDA falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual Debt-to-EBITDA, the EBITDA of the last fiscal year is used. In calculating the annualized quarterly data,
the EBITDA data used here is four times the quarterly (Mar. 2026) EBITDA data.
Asahi-Seiki Manufacturing Co (NGO:6111) has a Debt-to-EBITDA of 1.17 as of Mar. 2026. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Asahi-Seiki Manufacturing Co. This is 16% below median its historical median of 1.39. Over the past decade, Asahi-Seiki Manufacturing Co's Debt-to-EBITDA has ranged from 0.50 to 2.39. According to the industry distribution chart, Asahi-Seiki Manufacturing Co ranks #1414 out of 2348 companies in the Industrial Products industry, placing it in the top 60.2%.
Is Asahi-Seiki Manufacturing Co's Debt-to-EBITDA too high?
Asahi-Seiki Manufacturing Co's current Debt-to-EBITDA of 1.17 is 16% below median its 10-year median of 1.39. Over the past 10 years, this metric has ranged from a low of 0.50 to a high of 2.39. The Industrial Products industry median Debt-to-EBITDA is 1.68. Asahi-Seiki Manufacturing Co's value of 1.17 is 30.4% below this industry median. Based on the distribution chart, Asahi-Seiki Manufacturing Co ranks #1414 out of 2348 companies in the Industrial Products industry, which is below the industry midpoint. Overall, Asahi-Seiki Manufacturing Co has a GF Score™ of 55/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Asahi-Seiki Manufacturing Co's Debt-to-EBITDA compare to CRS and ATI?
According to the Industrial Products industry distribution chart, Asahi-Seiki Manufacturing Co ranks #1414 out of 2348 companies for Debt-to-EBITDA. This places Asahi-Seiki Manufacturing Co in the lower half of its industry. The industry median Debt-to-EBITDA is 1.68. Asahi-Seiki Manufacturing Co's value of 1.17 is 30.4% below this benchmark. Historically, Asahi-Seiki Manufacturing Co's own Debt-to-EBITDA has ranged from 0.50 to 2.39 over the past decade. While the company's 10-year median is 1.39 vs. the industry median of 1.68, Asahi-Seiki Manufacturing Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Debt-to-EBITDA for an Industrial Products company?
The median Debt-to-EBITDA among Industrial Products companies is 1.68, based on 2,348 companies in the industry. Companies in the top quartile (top 25%) have a Debt-to-EBITDA significantly above this median, while those in the bottom quartile fall well below. However, Debt-to-EBITDA should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Asahi-Seiki Manufacturing Co's current Debt-to-EBITDA of 1.17 is 30.4% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Debt-to-EBITDA mean?
A high Debt-to-EBITDA can signal that a stock is expensive relative to its fundamentals. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Asahi-Seiki Manufacturing Co. For the Industrial Products industry, the median Debt-to-EBITDA is 1.68 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Asahi-Seiki Manufacturing Co's current Debt-to-EBITDA is 1.17, which is 16% below median its own 10-year median of 1.39. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Asahi-Seiki Manufacturing Co stock overvalued right now?
Based on GuruFocus' analysis, Asahi-Seiki Manufacturing Co (NGO:6111) is currently considered Modestly Undervalued. The stock's GF Value™ is 円2,405.80, compared to a current price of 円2,012.00 — trading 16.4% below its estimated fair value. The current Debt-to-EBITDA is 1.17, which is 16% below median its 10-year median of 1.39 and 30.4% below the Industrial Products industry median of 1.68. Asahi-Seiki Manufacturing Co's overall GF Score™ is 55/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Debt-to-EBITDA calculated?
Debt-to-EBITDA is calculated from a company's financial statements. For Asahi-Seiki Manufacturing Co (NGO:6111), the current Debt-to-EBITDA is 1.17 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Asahi-Seiki Manufacturing Co (NGO:6111) Overvalued in 2026?
Based on GuruFocus' analysis, Asahi-Seiki Manufacturing Co stock appears to be undervalued.
The current stock price of 円2,012.00 is trading 16.4% below its estimated GF Value™ of 円2,405.80.
GuruFocus considers Asahi-Seiki Manufacturing Co to be Modestly Undervalued.
Key valuation signals for NGO:6111:
Debt-to-EBITDA: 1.17 (16% below median its 10-year median of 1.39)
GF Value™: 円2,405.80 vs. price of 円2,012.00 (16.4% below fair value)
Industry Position: 30.4% below the Industrial Products median (#1414 of 2348)
No single metric tells the full story. See the NGO:6111 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Asahi-Seiki Manufacturing Co Ltd is a Japan-based company that engages in the manufacture and sale of precision metal products, press machines, and spring forming machines. The company's segment includes the Precision Machining Division and the Mechanical Division. The company generates the majority of its revenue from the Precision Machining Division. The Precision Machining Division manufactures and sells precision metal products and small-caliber bullets.
55GF Score
Get the complete analysis for NGO:6111
Debt-to-EBITDA is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
NGO:6111 has been successfully added to your 
