Asahi-Seiki Manufacturing CoNGO:6111 54 PEG Ratio is 38.17 as of Jul. 11, 2026, which is 1511% above its 10-year median of 2.37. GuruFocus rates NGO:6111 with a GF Score™ of 54/100 and a GF Value™ of 円2,348.77 (Modestly Undervalued). The stock has 5 warning signs investors should review. Among 1,278 Industrial Products companies, Asahi-Seiki Manufacturing Co ranks worse than 96.4% on this metric.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Asahi-Seiki Manufacturing Co's PEG Ratio or its related term are showing as below:
NGO:6111'
s PEG Ratio Range Over the Past 10 Years
Min: 1.16 Med: 2.37 Max: 38.17
Current: 38.17
During the past 13 years, Asahi-Seiki Manufacturing Co's highest PEG Ratio was 38.17. The lowest was 1.16. And the median was 2.37.
NGO:6111's PEG Ratio is ranked worse than 96.4% of 1278
companies
in the Industrial Products industry
Industry Median: 1.8
vs NGO:6111: 38.17
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Asahi-Seiki Manufacturing Co (NGO:6111) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Asahi-Seiki Manufacturing Co PEG Ratio Related Terms
Asahi-Seiki Manufacturing Co PEG Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Metal Fabrication subindustry, Asahi-Seiki Manufacturing Co's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Asahi-Seiki Manufacturing Co PEG Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Asahi-Seiki Manufacturing Co's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Asahi-Seiki Manufacturing Co's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Asahi-Seiki Manufacturing Co (NGO:6111) has a PEG Ratio of 38.17 as of Jul. 11, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Asahi-Seiki Manufacturing Co and its competitors. This is 1511% above median its historical median of 2.37. Over the past decade, Asahi-Seiki Manufacturing Co's PEG Ratio has ranged from 1.16 to 38.17. According to the industry distribution chart, Asahi-Seiki Manufacturing Co ranks #1232 out of 1278 companies in the Industrial Products industry, placing it in the top 96.4%.
Is Asahi-Seiki Manufacturing Co's PEG Ratio too high?
Asahi-Seiki Manufacturing Co's current PEG Ratio of 38.17 is 1511% above median its 10-year median of 2.37. Over the past 10 years, this metric has ranged from a low of 1.16 to a high of 38.17. The Industrial Products industry median PEG Ratio is 1.80. Asahi-Seiki Manufacturing Co's value of 38.17 is 2020.6% above this industry median. Based on the distribution chart, Asahi-Seiki Manufacturing Co ranks #1232 out of 1278 companies in the Industrial Products industry, which is in the bottom quartile relative to peers. Overall, Asahi-Seiki Manufacturing Co has a GF Score™ of 54/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Asahi-Seiki Manufacturing Co's PEG Ratio compare to CRS and ATI?
According to the Industrial Products industry distribution chart, Asahi-Seiki Manufacturing Co ranks #1232 out of 1278 companies for PEG Ratio. This places Asahi-Seiki Manufacturing Co in the lower half of its industry. The industry median PEG Ratio is 1.80. Asahi-Seiki Manufacturing Co's value of 38.17 is 2020.6% above this benchmark. Historically, Asahi-Seiki Manufacturing Co's own PEG Ratio has ranged from 1.16 to 38.17 over the past decade. While the company's 10-year median is 2.37 vs. the industry median of 1.80, Asahi-Seiki Manufacturing Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for an Industrial Products company?
The median PEG Ratio among Industrial Products companies is 1.80, based on 1,278 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Asahi-Seiki Manufacturing Co's current PEG Ratio of 38.17 is 2020.6% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Asahi-Seiki Manufacturing Co and its competitors. For the Industrial Products industry, the median PEG Ratio is 1.80 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Asahi-Seiki Manufacturing Co's current PEG Ratio is 38.17, which is 1511% above median its own 10-year median of 2.37. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Asahi-Seiki Manufacturing Co stock overvalued right now?
Based on GuruFocus' analysis, Asahi-Seiki Manufacturing Co (NGO:6111) is currently considered Modestly Undervalued. The stock's GF Value™ is 円2,348.77, compared to a current price of 円2,080.00 — trading 11.4% below its estimated fair value. The current PEG Ratio is 38.17, which is 1511% above median its 10-year median of 2.37 and 2020.6% above the Industrial Products industry median of 1.80. Asahi-Seiki Manufacturing Co's overall GF Score™ is 54/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Asahi-Seiki Manufacturing Co (NGO:6111), the current PEG Ratio is 38.17 as of Jul. 11, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Asahi-Seiki Manufacturing Co (NGO:6111) Overvalued in 2026?
Based on GuruFocus' analysis, Asahi-Seiki Manufacturing Co stock appears to be undervalued.
The current stock price of 円2,080.00 is trading 11.4% below its estimated GF Value™ of 円2,348.77.
GuruFocus considers Asahi-Seiki Manufacturing Co to be Modestly Undervalued.
Key valuation signals for NGO:6111:
PEG Ratio: 38.17 (1511% above median its 10-year median of 2.37)
GF Value™: 円2,348.77 vs. price of 円2,080.00 (11.4% below fair value)
Industry Position: 2020.6% above the Industrial Products median (#1232 of 1278)
No single metric tells the full story. See the NGO:6111 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Asahi-Seiki Manufacturing Co Ltd is a Japan-based company that engages in the manufacture and sale of precision metal products, press machines, and spring forming machines. The company's segment includes the Precision Machining Division and the Mechanical Division. The company generates the majority of its revenue from the Precision Machining Division. The Precision Machining Division manufactures and sells precision metal products and small-caliber bullets.
54GF Score
Get the complete analysis for NGO:6111
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
NGO:6111 has been successfully added to your 
