Asahi-Seiki Manufacturing CoNGO:6111 -1.10%55 EBITDA Margin % is 7.88% as of Mar. 2026, which is 20% below its 10-year median of 9.86. GuruFocus rates NGO:6111 with a GF Score™ of 55/100 and a GF Value™ of 円2,346.66 (Modestly Undervalued). The stock has 6 warning signs investors should review. Among 3,039 Industrial Products companies, Asahi-Seiki Manufacturing Co ranks better than 68.67% on this metric.
Asahi-Seiki Manufacturing Co (NGO:6111) EBITDA Margin % Explanation
EBITDA Margin % is the ratio of EBITDA divided by net sales or Revenue. It is an performance metric measuring company's operating profitability. EBITDA Margin takes depreciation and amortization, interest expense and tax into account, which makes it easy to compare the relative profitability of companies of different sizes in the same industry.
Asahi-Seiki Manufacturing Co EBITDA Margin % Related Terms
Asahi-Seiki Manufacturing Co EBITDA Margin % Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Asahi-Seiki Manufacturing Co EBITDA Margin % Chart
NGO:6111 vs ATI, CRS, MLI: EBITDA Margin % Comparison
For the Metal Fabrication subindustry, Asahi-Seiki Manufacturing Co's EBITDA Margin %, along with its competitors' market caps and EBITDA Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Asahi-Seiki Manufacturing Co EBITDA Margin % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Asahi-Seiki Manufacturing Co's EBITDA Margin % distribution charts can be found below:
* The bar in red indicates where Asahi-Seiki Manufacturing Co's EBITDA Margin % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Asahi-Seiki Manufacturing Co (NGO:6111) has a EBITDA Margin % of 7.88% as of Mar. 2026. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Asahi-Seiki Manufacturing Co and its competitors. This is 20% below median its historical median of 9.86. Over the past decade, Asahi-Seiki Manufacturing Co's EBITDA Margin % has ranged from 7.24 to 14.20. According to the industry distribution chart, Asahi-Seiki Manufacturing Co ranks #952 out of 3039 companies in the Industrial Products industry, placing it in the top 31.3%.
Is Asahi-Seiki Manufacturing Co's EBITDA Margin % too high?
Asahi-Seiki Manufacturing Co's current EBITDA Margin % of 7.88% is 20% below median its 10-year median of 9.86. Over the past 10 years, this metric has ranged from a low of 7.24 to a high of 14.20. The Industrial Products industry median EBITDA Margin % is 9.45. Asahi-Seiki Manufacturing Co's value of 7.88% is 16.6% below this industry median. Based on the distribution chart, Asahi-Seiki Manufacturing Co ranks #952 out of 3039 companies in the Industrial Products industry, which is above the industry midpoint. Overall, Asahi-Seiki Manufacturing Co has a GF Score™ of 55/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Asahi-Seiki Manufacturing Co's EBITDA Margin % compare to ATI and CRS?
According to the Industrial Products industry distribution chart, Asahi-Seiki Manufacturing Co ranks #952 out of 3039 companies for EBITDA Margin %. This puts Asahi-Seiki Manufacturing Co in the upper half of its industry. The industry median EBITDA Margin % is 9.45. Asahi-Seiki Manufacturing Co's value of 7.88% is 16.6% below this benchmark. Historically, Asahi-Seiki Manufacturing Co's own EBITDA Margin % has ranged from 7.24 to 14.20 over the past decade. While the company's 10-year median is 9.86 vs. the industry median of 9.45, Asahi-Seiki Manufacturing Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EBITDA Margin % for an Industrial Products company?
The median EBITDA Margin % among Industrial Products companies is 9.45, based on 3,039 companies in the industry. Companies in the top quartile (top 25%) have a EBITDA Margin % significantly above this median, while those in the bottom quartile fall well below. However, EBITDA Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Asahi-Seiki Manufacturing Co's current EBITDA Margin % of 7.88% is 16.6% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EBITDA Margin % mean?
A high EBITDA Margin % can signal that a stock is expensive relative to its fundamentals. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Asahi-Seiki Manufacturing Co and its competitors. For the Industrial Products industry, the median EBITDA Margin % is 9.45 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Asahi-Seiki Manufacturing Co's current EBITDA Margin % is 7.88%, which is 20% below median its own 10-year median of 9.86. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Asahi-Seiki Manufacturing Co stock overvalued right now?
Based on GuruFocus' analysis, Asahi-Seiki Manufacturing Co (NGO:6111) is currently considered Modestly Undervalued. The stock's GF Value™ is 円2,346.66, compared to a current price of 円1,986.00 — trading 15.4% below its estimated fair value. The current EBITDA Margin % is 7.88%, which is 20% below median its 10-year median of 9.86 and 16.6% below the Industrial Products industry median of 9.45. Asahi-Seiki Manufacturing Co's overall GF Score™ is 55/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EBITDA Margin % calculated?
EBITDA Margin % is calculated from a company's financial statements. For Asahi-Seiki Manufacturing Co (NGO:6111), the current EBITDA Margin % is 7.88% as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Asahi-Seiki Manufacturing Co (NGO:6111) Overvalued in 2026?
Based on GuruFocus' analysis, Asahi-Seiki Manufacturing Co stock appears to be undervalued.
The current stock price of 円1,986.00 is trading 15.4% below its estimated GF Value™ of 円2,346.66.
GuruFocus considers Asahi-Seiki Manufacturing Co to be Modestly Undervalued.
Key valuation signals for NGO:6111:
EBITDA Margin %: 7.88% (20% below median its 10-year median of 9.86)
GF Value™: 円2,346.66 vs. price of 円1,986.00 (15.4% below fair value)
Industry Position: 16.6% below the Industrial Products median (#952 of 3039)
No single metric tells the full story. See the NGO:6111 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Asahi-Seiki Manufacturing Co Ltd is a Japan-based company that engages in the manufacture and sale of precision metal products, press machines, and spring forming machines. The company's segment includes the Precision Machining Division and the Mechanical Division. The company generates the majority of its revenue from the Precision Machining Division. The Precision Machining Division manufactures and sells precision metal products and small-caliber bullets.
55GF Score
Get the complete analysis for NGO:6111
EBITDA Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
NGO:6111 has been successfully added to your 
