Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt. According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
The historical rank and industry rank for Power Mech Projects's Debt-to-EBITDA or its related term are showing as below:
NSE:POWERMECH'
s Debt-to-EBITDA Range Over the Past 10 Years
Min: 0.79 Med: 1.25 Max: 11.86
Current: 0.89
During the past 12 years, the highest Debt-to-EBITDA Ratio of Power Mech Projects was 11.86. The lowest was 0.79. And the median was 1.25.
NSE:POWERMECH's Debt-to-EBITDA is ranked better than 69.71% of 1413
companies
in the Construction industry
Industry Median: 2.1
vs NSE:POWERMECH: 0.89
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt.
According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
Power Mech Projects Debt-to-EBITDA Related Terms
Power Mech Projects Debt-to-EBITDA Historical Data
* Premium members only.
The historical data trend for Power Mech Projects's Debt-to-EBITDA can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
NSE:POWERMECH vs PWR, FIX, EME: Debt-to-EBITDA Comparison
For the Engineering & Construction subindustry, Power Mech Projects's Debt-to-EBITDA, along with its competitors' market caps and Debt-to-EBITDA data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Power Mech Projects Debt-to-EBITDA vs Construction Industry
For the Construction industry and Industrials sector, Power Mech Projects's Debt-to-EBITDA distribution charts can be found below:
* The bar in red indicates where Power Mech Projects's Debt-to-EBITDA falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual Debt-to-EBITDA, the EBITDA of the last fiscal year is used. In calculating the annualized quarterly data,
the EBITDA data used here is four times the quarterly (Jun. 2026) EBITDA data.
Power Mech Projects (NSE:POWERMECH) has a Debt-to-EBITDA of 0.00 as of Jun. 2026. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Power Mech Projects. Over the past decade, Power Mech Projects' Debt-to-EBITDA has ranged from 0.79 to 11.86. According to the industry distribution chart, Power Mech Projects ranks #428 out of 1413 companies in the Construction industry, placing it in the top 30.3%.
Is Power Mech Projects' Debt-to-EBITDA too high?
Power Mech Projects' current Debt-to-EBITDA is 0.00. Over the past 10 years, this metric has ranged from a low of 0.79 to a high of 11.86. Based on the distribution chart, Power Mech Projects ranks #428 out of 1413 companies in the Construction industry, which is above the industry midpoint. Overall, Power Mech Projects has a GF Score™ of 95/100 and is considered Significantly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Power Mech Projects' Debt-to-EBITDA compare to PWR and FIX?
According to the Construction industry distribution chart, Power Mech Projects ranks #428 out of 1413 companies for Debt-to-EBITDA. This puts Power Mech Projects in the upper half of its industry. The industry median Debt-to-EBITDA is 2.10. Historically, Power Mech Projects' own Debt-to-EBITDA has ranged from 0.79 to 11.86 over the past decade. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Debt-to-EBITDA for a Construction company?
The median Debt-to-EBITDA among Construction companies is 2.10, based on 1,413 companies in the industry. Companies in the top quartile (top 25%) have a Debt-to-EBITDA significantly above this median, while those in the bottom quartile fall well below. However, Debt-to-EBITDA should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Debt-to-EBITDA mean?
A high Debt-to-EBITDA can signal that a stock is expensive relative to its fundamentals. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Power Mech Projects. For the Construction industry, the median Debt-to-EBITDA is 2.10 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Power Mech Projects's current Debt-to-EBITDA is 0.00. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Power Mech Projects stock overvalued right now?
Based on GuruFocus' analysis, Power Mech Projects (NSE:POWERMECH) is currently considered Significantly Undervalued. The stock's GF Value™ is ₹3,519.58, compared to a current price of ₹2,455.20 — trading 30.2% below its estimated fair value. The current Debt-to-EBITDA is 0.00. Power Mech Projects' overall GF Score™ is 95/100 with 1 warning sign to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Debt-to-EBITDA calculated?
Debt-to-EBITDA is calculated from a company's financial statements. For Power Mech Projects (NSE:POWERMECH), the current Debt-to-EBITDA is 0.00 as of Jun. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Power Mech Projects (NSE:POWERMECH) Overvalued in 2026?
Based on GuruFocus' analysis, Power Mech Projects stock appears to be undervalued.
The current stock price of ₹2,455.20 is trading 30.2% below its estimated GF Value™ of ₹3,519.58.
GuruFocus considers Power Mech Projects to be Significantly Undervalued.
Key valuation signals for NSE:POWERMECH:
Debt-to-EBITDA: 0.00
GF Value™: ₹3,519.58 vs. price of ₹2,455.20 (30.2% below fair value)
No single metric tells the full story. See the NSE:POWERMECH stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Power Mech Projects Ltd is an India-based engineering and construction company providing integrated service in erection, testing and commissioning (ETC) of boilers, turbines and generators and balance of plant (BOP), civil works and operation and maintenance (O&M). The company is also undertaking railway projects and executing railway project of doubling of tracks including electrification, signalling, culverts, platforms, transmission and distribution portfolio. It operates in the business segment of construction and maintenance activities. Geographically the company generates the majority of its revenue from India.
95GF Score
Get the complete analysis for NSE:POWERMECH
Debt-to-EBITDA is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
NSE:POWERMECH has been successfully added to your 
