Power Mech Projects (NSE:POWERMECH) Piotroski F-Score: 5 (As of Jun. 29, 2026) — Near Median


NSE:POWERMECH Power Mech Projects Ltd NSE:POWERMECH
90 GF Score
Price ₹2,760.10
GF Value ₹3,445.97
Valuation Modestly Undervalued
! 2 Warning Signs
View Full Analysis

What is Power Mech Projects Piotroski F-Score?

Power Mech Projects NSE:POWERMECH -1.17% 90 Piotroski F-Score is 5 as of Jun. 29, 2026, which is at its 10-year median of 5.00. GuruFocus rates NSE:POWERMECH with a GF Score™ of 90/100 and a GF Value™ of ₹3,445.97 (Modestly Undervalued). The stock has 2 warning signs investors should review. Among 1,729 Construction companies, Power Mech Projects ranks better than 52.81% on this metric.

The zones of discrimination were as such:

Good or high score = 7, 8, 9
Bad or low score = 0, 1, 2, 3

Power Mech Projects has an F-score of 5 indicating the company's financial situation is typical for a stable company.

The historical rank and industry rank for Power Mech Projects's Piotroski F-Score or its related term are showing as below:

NSE:POWERMECH' s Piotroski F-Score Range Over the Past 10 Years
Min: 3   Med: 5   Max: 8
Current: 5

During the past 12 years, the highest Piotroski F-Score of Power Mech Projects was 8. The lowest was 3. And the median was 5.

Power Mech Projects  (NSE:POWERMECH) Piotroski F-Score Explanation

The developer of the system is Joseph D. Piotroski is relatively unknown accounting professor who shuns publicity and rarely gives interviews.

He graduated from the University of Illinois with a B.S. in accounting in 1989, received an M.B.A. from Indiana University in 1994. Five years later, in 1999, after earning a Ph.D. in accounting from the University of Michigan, he became an associate professor of accounting at the University of Chicago.

In 2000, he wrote a research paper called "Value Investing: The Use of Historical Financial Statement Information to Separate Winners from Losers" (pdf).

He wanted to see if he can develop a system (using a simple nine-point scoring system) that can increase the returns of a strategy of investing in low price to book (referred to in the paper as high book to market) value companies.

What he found was something that exceeded his most optimistic expectations.

Buying only those companies that scored highest (8 or 9) on his nine-point scale, or F-Score as he called it, over the 20 year period from 1976 to 1996 led to an average out-performance over the market of 13.4%.

Even more impressive were the results of a strategy of investing in the highest F-Score companies (8 or 9) and shorting companies with the lowest F-Score (0 or 1).

Over the same period from 1976 to 1996 (20 years) this strategy led to an average yearly return of 23%, substantially outperforming the average S&P 500 index return of 15.83% over the same period.


Power Mech Projects Piotroski F-Score Related Terms


Power Mech Projects Piotroski F-Score Historical Data

* Premium members only.

The historical data trend for Power Mech Projects's Piotroski F-Score can be seen below:

* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD.
* For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.

Power Mech Projects Piotroski F-Score Chart

Power Mech Projects Annual Data
Trend Mar17 Mar18 Mar19 Mar20 Mar21 Mar22 Mar23 Mar24 Mar25 Mar26
Piotroski F-Score
Get a 7-Day Free Trial Premium Member Only Premium Member Only 8.00 7.00 4.00 4.00 5.00

Power Mech Projects Quarterly Data
Jun21 Sep21 Dec21 Mar22 Jun22 Sep22 Dec22 Mar23 Jun23 Sep23 Dec23 Mar24 Jun24 Sep24 Dec24 Mar25 Jun25 Sep25 Dec25 Mar26
Piotroski F-Score Get a 7-Day Free Trial Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only 4.00 0.00 0.00 0.00 5.00

NSE:POWERMECH vs PWR, FIX, EME: Piotroski F-Score Comparison

For the Engineering & Construction subindustry, Power Mech Projects's Piotroski F-Score, along with its competitors' market caps and Piotroski F-Score data, can be viewed below:

* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.


Power Mech Projects Piotroski F-Score vs Construction Industry

For the Construction industry and Industrials sector, Power Mech Projects's Piotroski F-Score distribution charts can be found below:

* The bar in red indicates where Power Mech Projects's Piotroski F-Score falls into.


NSE:POWERMECH
90GF Score
Power Mech Projects Ltd NSE:POWERMECH
Piotroski F-Score is just one metric. See GF Score™, valuation, warning signs, and more.
View Full Analysis

How is the Piotroski F-Score calculated?

* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD.
* For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.

This Year (Mar26) TTM:Last Year (Mar25) TTM:
Net Income was ₹3,640 Mil.
Cash Flow from Operations was ₹4,298 Mil.
Revenue was ₹60,616 Mil.
Gross Profit was ₹15,807 Mil.
Average Total Assets from the begining of this year (Mar25)
to the end of this year (Mar26) was (46144.1 + 55893.6) / 2 = ₹51018.85 Mil.
Total Assets at the begining of this year (Mar25) was ₹46,144 Mil.
Long-Term Debt & Capital Lease Obligation was ₹1,175 Mil.
Total Current Assets was ₹41,085 Mil.
Total Current Liabilities was ₹23,989 Mil.
Net Income was ₹3,265 Mil.

Revenue was ₹52,341 Mil.
Gross Profit was ₹13,540 Mil.
Average Total Assets from the begining of last year (Mar24)
to the end of last year (Mar25) was (35675.6 + 46144.1) / 2 = ₹40909.85 Mil.
Total Assets at the begining of last year (Mar24) was ₹35,676 Mil.
Long-Term Debt & Capital Lease Obligation was ₹576 Mil.
Total Current Assets was ₹37,248 Mil.
Total Current Liabilities was ₹20,660 Mil.

*Note: If the latest quarterly/semi-annual/annual total assets data is 0, then we will use previous quarterly/semi-annual/annual data for all the items in the balance sheet.

Profitability

Question 1. Return on Assets (ROA)

Net income before extraordinary items for the year divided by Total Assets at the beginning of the year.

Score 1 if positive, 0 if negative.

Power Mech Projects's current Net Income (TTM) was 3,640. ==> Positive ==> Score 1.

Question 2. Cash Flow Return on Assets (CFROA)

Net cash flow from operating activities (operating cash flow) divided by Total Assets at the beginning of the year.

Score 1 if positive, 0 if negative.

Power Mech Projects's current Cash Flow from Operations (TTM) was 4,298. ==> Positive ==> Score 1.

Question 3. Change in Return on Assets

Compare this year's return on assets (1) to last year's return on assets.

Score 1 if it's higher, 0 if it's lower.

ROA (This Year)=Net Income/Total Assets (Mar25)
=3639.8/46144.1
=0.07887899

ROA (Last Year)=Net Income/Total Assets (Mar24)
=3264.8/35675.6
=0.09151353

Power Mech Projects's return on assets of this year was 0.07887899. Power Mech Projects's return on assets of last year was 0.09151353. ==> Last year is higher ==> Score 0.

Question 4. Quality of Earnings (Accrual)

Compare Cash flow return on assets (2) to return on assets (1)

Score 1 if CFROA > ROA, 0 if CFROA <= ROA.

Power Mech Projects's current Net Income (TTM) was 3,640. Power Mech Projects's current Cash Flow from Operations (TTM) was 4,298. ==> 4,298 > 3,640 ==> CFROA > ROA ==> Score 1.

Funding

Question 5. Change in Gearing or Leverage

Compare this year's gearing (long-term debt divided by average total assets) to last year's gearing.

Score 0 if this year's gearing is higher, 1 otherwise.

Gearing (This Year: Mar26)=Long-Term Debt & Capital Lease Obligation/Average Total Assets from Mar25 to Mar26
=1175.3/51018.85
=0.02303658

Gearing (Last Year: Mar25)=Long-Term Debt & Capital Lease Obligation/Average Total Assets from Mar24 to Mar25
=576.1/40909.85
=0.01408218

Power Mech Projects's gearing of this year was 0.02303658. Power Mech Projects's gearing of last year was 0.01408218. ==> Last year is lower than this year ==> Score 0.

Question 6. Change in Working Capital (Liquidity)

Compare this year's current ratio (current assets divided by current liabilities) to last year's current ratio.

Score 1 if this year's current ratio is higher, 0 if it's lower

Current Ratio (This Year: Mar26)=Total Current Assets/Total Current Liabilities
=41084.9/23988.8
=1.71267008

Current Ratio (Last Year: Mar25)=Total Current Assets/Total Current Liabilities
=37248/20659.5
=1.8029478

Power Mech Projects's current ratio of this year was 1.71267008. Power Mech Projects's current ratio of last year was 1.8029478. ==> Last year's current ratio is higher ==> Score 0.

Question 7. Change in Shares in Issue

Compare the number of shares in issue this year, to the number in issue last year.

Score 0 if there is larger number of shares in issue this year, 1 otherwise.

Power Mech Projects's number of shares in issue this year was 31.617. Power Mech Projects's number of shares in issue last year was 31.617. ==> There is smaller number of shares in issue this year, or the same. ==> Score 1.

Efficiency

Question 8. Change in Gross Margin

Compare this year's gross margin (Gross Profit divided by sales) to last year's.

Score 1 if this year's gross margin is higher, 0 if it's lower.

Gross Margin (This Year: TTM)=Gross Profit/Revenue
=15806.5/60615.7
=0.26076578

Gross Margin (Last Year: TTM)=Gross Profit/Revenue
=13539.5/52341.4
=0.25867669

Power Mech Projects's gross margin of this year was 0.26076578. Power Mech Projects's gross margin of last year was 0.25867669. ==> This year's gross margin is higher. ==> Score 1.

Question 9. Change in asset turnover

Compare this year's asset turnover (total sales for the year divided by total assets at the beginning of the year) to last year's asset turnover ratio.

Score 1 if this year's asset turnover ratio is higher, 0 if it's lower

Asset Turnover (This Year)=Revenue/Total Assets at the Beginning of This Year (Mar25)
=60615.7/46144.1
=1.31361756

Asset Turnover (Last Year)=Revenue/Total Assets at the Beginning of Last Year (Mar24)
=52341.4/35675.6
=1.46714842

Power Mech Projects's asset turnover of this year was 1.31361756. Power Mech Projects's asset turnover of last year was 1.46714842. ==> Last year's asset turnover is higher ==> Score 0.

Evaluation

Piotroski F-Score= Que. 1+ Que. 2+ Que. 3+Que. 4+Que. 5+Que. 6+Que. 7+Que. 8+Que. 9
=1+1+0+1+0+0+1+1+0
=5

Good or high score = 7, 8, 9
Bad or low score = 0, 1, 2, 3

Power Mech Projects has an F-score of 5 indicating the company's financial situation is typical for a stable company.

Frequently Asked Questions Learn more about Piotroski F-Score →
What does a Piotroski F-Score of 5 mean?
Power Mech Projects (NSE:POWERMECH) has a Piotroski F-Score of 5 as of Jun. 29, 2026. The Piotroski F-score grades a company's business operating strength from 0-9. View historical data on Power Mech Projects and its competitors. This is near median its historical median of 5.00. Over the past decade, Power Mech Projects' Piotroski F-Score has ranged from 3.00 to 8.00. According to the industry distribution chart, Power Mech Projects ranks #816 out of 1729 companies in the Construction industry, placing it in the top 47.2%.
Is Power Mech Projects' Piotroski F-Score too high?
Power Mech Projects' current Piotroski F-Score of 5 is near median its 10-year median of 5.00. Over the past 10 years, this metric has ranged from a low of 3.00 to a high of 8.00. The Construction industry median Piotroski F-Score is 5.00. Power Mech Projects' value of 5 is 0% at this industry median. Based on the distribution chart, Power Mech Projects ranks #816 out of 1729 companies in the Construction industry, which is above the industry midpoint. Overall, Power Mech Projects has a GF Score™ of 90/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Power Mech Projects' Piotroski F-Score compare to PWR and FIX?
According to the Construction industry distribution chart, Power Mech Projects ranks #816 out of 1729 companies for Piotroski F-Score. This puts Power Mech Projects in the upper half of its industry. The industry median Piotroski F-Score is 5.00. Power Mech Projects' value of 5 is 0% at this benchmark. Historically, Power Mech Projects' own Piotroski F-Score has ranged from 3.00 to 8.00 over the past decade. While the company's 10-year median is 5.00 vs. the industry median of 5.00, Power Mech Projects has consistently been at the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Piotroski F-Score for a Construction company?
The median Piotroski F-Score among Construction companies is 5.00, based on 1,729 companies in the industry. Companies in the top quartile (top 25%) have a Piotroski F-Score significantly above this median, while those in the bottom quartile fall well below. However, Piotroski F-Score should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Power Mech Projects's current Piotroski F-Score of 5 is 0% at the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Piotroski F-Score mean?
A high Piotroski F-Score can signal that a stock is expensive relative to its fundamentals. The Piotroski F-score grades a company's business operating strength from 0-9. View historical data on Power Mech Projects and its competitors. For the Construction industry, the median Piotroski F-Score is 5.00 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Power Mech Projects's current Piotroski F-Score is 5, which is near median its own 10-year median of 5.00. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Power Mech Projects stock overvalued right now?
Based on GuruFocus' analysis, Power Mech Projects (NSE:POWERMECH) is currently considered Modestly Undervalued. The stock's GF Value™ is ₹3,445.97, compared to a current price of ₹2,760.10 — trading 19.9% below its estimated fair value. The current Piotroski F-Score is 5, which is near median its 10-year median of 5.00 and 0% at the Construction industry median of 5.00. Power Mech Projects' overall GF Score™ is 90/100 with 2 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Piotroski F-Score calculated?
Piotroski F-Score is calculated from a company's financial statements. For Power Mech Projects (NSE:POWERMECH), the current Piotroski F-Score is 5 as of Jun. 29, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.

Is Power Mech Projects (NSE:POWERMECH) Overvalued in 2026?

Based on GuruFocus' analysis, Power Mech Projects stock appears to be undervalued. The current stock price of ₹2,760.10 is trading 19.9% below its estimated GF Value™ of ₹3,445.97. GuruFocus considers Power Mech Projects to be Modestly Undervalued.

Key valuation signals for NSE:POWERMECH:

  • Piotroski F-Score: 5 (near median its 10-year median of 5.00)
  • GF Value™: ₹3,445.97 vs. price of ₹2,760.10 (19.9% below fair value)
  • GF Score™: 90/100 with 2 warning signs
  • Industry Position: 0% at the Construction median (#816 of 1729)

No single metric tells the full story. See the NSE:POWERMECH stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.


Power Mech Projects Business Description

Other Exchanges 539302:India
Address Plot No. 77, Jubilee Enclave Road, Opposite Hitex, Madhapur, Hyderabad, TG, IND, 500081
Power Mech Projects Ltd is an India-based engineering and construction company providing integrated service in erection, testing and commissioning (ETC) of boilers, turbines and generators and balance of plant (BOP), civil works and operation and maintenance (O&M). The company is also undertaking railway projects and executing railway project of doubling of tracks including electrification, signalling, culverts, platforms, transmission and distribution portfolio. It operates in the business segment of construction and maintenance activities. Geographically the company generates the majority of its revenue from India.
90GF Score

Get the complete analysis for NSE:POWERMECH

Piotroski F-Score is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.

₹2,760.10
Price
₹3,445.97
GF Value