Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt. According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
The historical rank and industry rank for Sagardeep Alloys's Debt-to-EBITDA or its related term are showing as below:
NSE:SAGARDEEP'
s Debt-to-EBITDA Range Over the Past 10 Years
Min: 1.32 Med: 4.67 Max: 6.03
Current: 2.94
During the past 12 years, the highest Debt-to-EBITDA Ratio of Sagardeep Alloys was 6.03. The lowest was 1.32. And the median was 4.67.
NSE:SAGARDEEP's Debt-to-EBITDA is ranked worse than 70.33% of 610
companies
in the Metals & Mining industry
Industry Median: 1.11
vs NSE:SAGARDEEP: 2.94
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt.
According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
Sagardeep Alloys Debt-to-EBITDA Related Terms
Sagardeep Alloys Debt-to-EBITDA Historical Data
* Premium members only.
The historical data trend for Sagardeep Alloys's Debt-to-EBITDA can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
NSE:SAGARDEEP vs SCCO, FCX: Debt-to-EBITDA Comparison
For the Copper subindustry, Sagardeep Alloys's Debt-to-EBITDA, along with its competitors' market caps and Debt-to-EBITDA data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Sagardeep Alloys Debt-to-EBITDA vs Metals & Mining Industry
For the Metals & Mining industry and Basic Materials sector, Sagardeep Alloys's Debt-to-EBITDA distribution charts can be found below:
* The bar in red indicates where Sagardeep Alloys's Debt-to-EBITDA falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual Debt-to-EBITDA, the EBITDA of the last fiscal year is used. In calculating the annualized quarterly data,
the EBITDA data used here is four times the quarterly (Dec. 2025) EBITDA data.
Sagardeep Alloys (NSE:SAGARDEEP) has a Debt-to-EBITDA of 0.00 as of Dec. 2025. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Sagardeep Alloys. Over the past decade, Sagardeep Alloys' Debt-to-EBITDA has ranged from 1.32 to 6.03. According to the industry distribution chart, Sagardeep Alloys ranks #429 out of 610 companies in the Metals & Mining industry, placing it in the top 70.3%.
Is Sagardeep Alloys' Debt-to-EBITDA too high?
Sagardeep Alloys' current Debt-to-EBITDA is 0.00. Over the past 10 years, this metric has ranged from a low of 1.32 to a high of 6.03. Based on the distribution chart, Sagardeep Alloys ranks #429 out of 610 companies in the Metals & Mining industry, which is below the industry midpoint. Overall, Sagardeep Alloys has a GF Score™ of 67/100 and is considered Significantly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Sagardeep Alloys' Debt-to-EBITDA compare to SCCO and FCX?
According to the Metals & Mining industry distribution chart, Sagardeep Alloys ranks #429 out of 610 companies for Debt-to-EBITDA. This places Sagardeep Alloys in the lower half of its industry. The industry median Debt-to-EBITDA is 1.11. Historically, Sagardeep Alloys' own Debt-to-EBITDA has ranged from 1.32 to 6.03 over the past decade. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Debt-to-EBITDA for a Metals & Mining company?
The median Debt-to-EBITDA among Metals & Mining companies is 1.11, based on 610 companies in the industry. Companies in the top quartile (top 25%) have a Debt-to-EBITDA significantly above this median, while those in the bottom quartile fall well below. However, Debt-to-EBITDA should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Debt-to-EBITDA mean?
A high Debt-to-EBITDA can signal that a stock is expensive relative to its fundamentals. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Sagardeep Alloys. For the Metals & Mining industry, the median Debt-to-EBITDA is 1.11 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Sagardeep Alloys's current Debt-to-EBITDA is 0.00. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Sagardeep Alloys stock overvalued right now?
Based on GuruFocus' analysis, Sagardeep Alloys (NSE:SAGARDEEP) is currently considered Significantly Undervalued. The stock's GF Value™ is ₹38.59, compared to a current price of ₹23.40 — trading 39.4% below its estimated fair value. The current Debt-to-EBITDA is 0.00. Sagardeep Alloys' overall GF Score™ is 67/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Debt-to-EBITDA calculated?
Debt-to-EBITDA is calculated from a company's financial statements. For Sagardeep Alloys (NSE:SAGARDEEP), the current Debt-to-EBITDA is 0.00 as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Sagardeep Alloys (NSE:SAGARDEEP) Overvalued in 2026?
Based on GuruFocus' analysis, Sagardeep Alloys stock appears to be undervalued.
The current stock price of ₹23.40 is trading 39.4% below its estimated GF Value™ of ₹38.59.
GuruFocus considers Sagardeep Alloys to be Significantly Undervalued.
Key valuation signals for NSE:SAGARDEEP:
Debt-to-EBITDA: 0.00
GF Value™: ₹38.59 vs. price of ₹23.40 (39.4% below fair value)
No single metric tells the full story. See the NSE:SAGARDEEP stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Sagardeep Alloys Ltd is engaged in the business of Copper Items & Chemicals and Trading in Ferrous and Non-ferrous metals. It is also a wholesaler of metal and metal ores. It is engaged in the manufacturing and trading of copper alloys consumables, Copper pipes and tubes, Copper flats, Copper coils, Copper rods, Copper anodes, Copper nuggets and Copper plates and also trades in Stainless Steel sheets / coils, rods. It also produces various types of Copper and Copper Alloy products like sheet, pipe, tube, section, bus bar, etc.
67GF Score
Get the complete analysis for NSE:SAGARDEEP
Debt-to-EBITDA is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
NSE:SAGARDEEP has been successfully added to your 
