Sagardeep AlloysNSE:SAGARDEEP -2.54%67 EBITDA Margin % is 3.51% as of Mar. 2025, which is 22% above its 10-year median of 2.87. GuruFocus rates NSE:SAGARDEEP with a GF Score™ of 67/100 and a GF Value™ of ₹42.82 (Significantly Undervalued). The stock has 3 warning signs investors should review. Among 841 Metals & Mining companies, Sagardeep Alloys ranks worse than 62.43% on this metric.
EBITDA Margin % is calculated as EBITDA divided by its Revenue. Sagardeep Alloys's EBITDA for the
six
months ended in Mar. 2025 was ₹44 Mil. Sagardeep Alloys's Revenue for the
six
months ended in Mar. 2025 was ₹1,248 Mil. Therefore, Sagardeep Alloys's EBITDA margin for the quarter that ended in Mar. 2025 was 3.51%.
EBITDA Margin % is the ratio of EBITDA divided by net sales or Revenue. It is an performance metric measuring company's operating profitability. EBITDA Margin takes depreciation and amortization, interest expense and tax into account, which makes it easy to compare the relative profitability of companies of different sizes in the same industry.
Sagardeep Alloys EBITDA Margin % Related Terms
Sagardeep Alloys EBITDA Margin % Historical Data
* Premium members only.
The historical data trend for Sagardeep Alloys's EBITDA Margin % can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
NSE:SAGARDEEP vs SCCO, FCX: EBITDA Margin % Comparison
For the Copper subindustry, Sagardeep Alloys's EBITDA Margin %, along with its competitors' market caps and EBITDA Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Sagardeep Alloys EBITDA Margin % vs Metals & Mining Industry
For the Metals & Mining industry and Basic Materials sector, Sagardeep Alloys's EBITDA Margin % distribution charts can be found below:
* The bar in red indicates where Sagardeep Alloys's EBITDA Margin % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Sagardeep Alloys (NSE:SAGARDEEP) has a EBITDA Margin % of 3.51% as of Mar. 2025. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Sagardeep Alloys and its competitors. This is 22% above median its historical median of 2.87. Over the past decade, Sagardeep Alloys' EBITDA Margin % has ranged from 2.14 to 7.30. According to the industry distribution chart, Sagardeep Alloys ranks #525 out of 841 companies in the Metals & Mining industry, placing it in the top 62.4%.
Is Sagardeep Alloys' EBITDA Margin % too high?
Sagardeep Alloys' current EBITDA Margin % of 3.51% is 22% above median its 10-year median of 2.87. Over the past 10 years, this metric has ranged from a low of 2.14 to a high of 7.30. The Metals & Mining industry median EBITDA Margin % is 8.89. Sagardeep Alloys' value of 3.51% is 60.5% below this industry median. Based on the distribution chart, Sagardeep Alloys ranks #525 out of 841 companies in the Metals & Mining industry, which is below the industry midpoint. Overall, Sagardeep Alloys has a GF Score™ of 67/100 and is considered Significantly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Sagardeep Alloys' EBITDA Margin % compare to SCCO and FCX?
According to the Metals & Mining industry distribution chart, Sagardeep Alloys ranks #525 out of 841 companies for EBITDA Margin %. This places Sagardeep Alloys in the lower half of its industry. The industry median EBITDA Margin % is 8.89. Sagardeep Alloys' value of 3.51% is 60.5% below this benchmark. Historically, Sagardeep Alloys' own EBITDA Margin % has ranged from 2.14 to 7.30 over the past decade. While the company's 10-year median is 2.87 vs. the industry median of 8.89, Sagardeep Alloys has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EBITDA Margin % for a Metals & Mining company?
The median EBITDA Margin % among Metals & Mining companies is 8.89, based on 841 companies in the industry. Companies in the top quartile (top 25%) have a EBITDA Margin % significantly above this median, while those in the bottom quartile fall well below. However, EBITDA Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Sagardeep Alloys's current EBITDA Margin % of 3.51% is 60.5% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EBITDA Margin % mean?
A high EBITDA Margin % can signal that a stock is expensive relative to its fundamentals. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Sagardeep Alloys and its competitors. For the Metals & Mining industry, the median EBITDA Margin % is 8.89 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Sagardeep Alloys's current EBITDA Margin % is 3.51%, which is 22% above median its own 10-year median of 2.87. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Sagardeep Alloys stock overvalued right now?
Based on GuruFocus' analysis, Sagardeep Alloys (NSE:SAGARDEEP) is currently considered Significantly Undervalued. The stock's GF Value™ is ₹42.82, compared to a current price of ₹24.94 — trading 41.8% below its estimated fair value. The current EBITDA Margin % is 3.51%, which is 22% above median its 10-year median of 2.87 and 60.5% below the Metals & Mining industry median of 8.89. Sagardeep Alloys' overall GF Score™ is 67/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EBITDA Margin % calculated?
EBITDA Margin % is calculated from a company's financial statements. For Sagardeep Alloys (NSE:SAGARDEEP), the current EBITDA Margin % is 3.51% as of Mar. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Sagardeep Alloys (NSE:SAGARDEEP) Overvalued in 2026?
Based on GuruFocus' analysis, Sagardeep Alloys stock appears to be undervalued.
The current stock price of ₹24.94 is trading 41.8% below its estimated GF Value™ of ₹42.82.
GuruFocus considers Sagardeep Alloys to be Significantly Undervalued.
Key valuation signals for NSE:SAGARDEEP:
EBITDA Margin %: 3.51% (22% above median its 10-year median of 2.87)
GF Value™: ₹42.82 vs. price of ₹24.94 (41.8% below fair value)
Industry Position: 60.5% below the Metals & Mining median (#525 of 841)
No single metric tells the full story. See the NSE:SAGARDEEP stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Sagardeep Alloys Ltd is engaged in the business of Copper Items & Chemicals and Trading in Ferrous and Non-ferrous metals. It is also a wholesaler of metal and metal ores. It is engaged in the manufacturing and trading of copper alloys consumables, Copper pipes and tubes, Copper flats, Copper coils, Copper rods, Copper anodes, Copper nuggets and Copper plates and also trades in Stainless Steel sheets / coils, rods. It also produces various types of Copper and Copper Alloy products like sheet, pipe, tube, section, bus bar, etc.
67GF Score
Get the complete analysis for NSE:SAGARDEEP
EBITDA Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
NSE:SAGARDEEP has been successfully added to your 
