Sagardeep AlloysNSE:SAGARDEEP -0.12%75 PEG Ratio is 1.60 as of Jul. 13, 2026, which is 12% below its 10-year median of 1.81. GuruFocus rates NSE:SAGARDEEP with a GF Score™ of 75/100 and a GF Value™ of ₹38.05 (Significantly Undervalued). The stock has 3 warning signs investors should review. Among 312 Metals & Mining companies, Sagardeep Alloys ranks worse than 59.62% on this metric.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Sagardeep Alloys's PEG Ratio or its related term are showing as below:
NSE:SAGARDEEP'
s PEG Ratio Range Over the Past 10 Years
Min: 1.6 Med: 1.81 Max: 1.92
Current: 1.6
During the past 12 years, Sagardeep Alloys's highest PEG Ratio was 1.92. The lowest was 1.60. And the median was 1.81.
NSE:SAGARDEEP's PEG Ratio is ranked worse than 59.62% of 312
companies
in the Metals & Mining industry
Industry Median: 1.175
vs NSE:SAGARDEEP: 1.60
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Sagardeep Alloys (NSE:SAGARDEEP) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Sagardeep Alloys PEG Ratio Related Terms
Sagardeep Alloys PEG Ratio Historical Data
* Premium members only.
The historical data trend for Sagardeep Alloys's PEG Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Copper subindustry, Sagardeep Alloys's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Sagardeep Alloys PEG Ratio vs Metals & Mining Industry
For the Metals & Mining industry and Basic Materials sector, Sagardeep Alloys's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Sagardeep Alloys's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Sagardeep Alloys (NSE:SAGARDEEP) has a PEG Ratio of 1.60 as of Jul. 13, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Sagardeep Alloys and its competitors. This is 12% below median its historical median of 1.81. Over the past decade, Sagardeep Alloys' PEG Ratio has ranged from 1.60 to 1.92. According to the industry distribution chart, Sagardeep Alloys ranks #186 out of 312 companies in the Metals & Mining industry, placing it in the top 59.6%.
Is Sagardeep Alloys' PEG Ratio too high?
Sagardeep Alloys' current PEG Ratio of 1.60 is 12% below median its 10-year median of 1.81. Over the past 10 years, this metric has ranged from a low of 1.60 to a high of 1.92. The Metals & Mining industry median PEG Ratio is 1.18. Sagardeep Alloys' value of 1.60 is 36.2% above this industry median. Based on the distribution chart, Sagardeep Alloys ranks #186 out of 312 companies in the Metals & Mining industry, which is below the industry midpoint. Overall, Sagardeep Alloys has a GF Score™ of 75/100 and is considered Significantly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Sagardeep Alloys' PEG Ratio compare to SCCO and FCX?
According to the Metals & Mining industry distribution chart, Sagardeep Alloys ranks #186 out of 312 companies for PEG Ratio. This places Sagardeep Alloys in the lower half of its industry. The industry median PEG Ratio is 1.18. Sagardeep Alloys' value of 1.60 is 36.2% above this benchmark. Historically, Sagardeep Alloys' own PEG Ratio has ranged from 1.60 to 1.92 over the past decade. While the company's 10-year median is 1.81 vs. the industry median of 1.18, Sagardeep Alloys has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for a Metals & Mining company?
The median PEG Ratio among Metals & Mining companies is 1.18, based on 312 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Sagardeep Alloys's current PEG Ratio of 1.60 is 36.2% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Sagardeep Alloys and its competitors. For the Metals & Mining industry, the median PEG Ratio is 1.18 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Sagardeep Alloys's current PEG Ratio is 1.60, which is 12% below median its own 10-year median of 1.81. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Sagardeep Alloys stock overvalued right now?
Based on GuruFocus' analysis, Sagardeep Alloys (NSE:SAGARDEEP) is currently considered Significantly Undervalued. The stock's GF Value™ is ₹38.05, compared to a current price of ₹24.47 — trading 35.7% below its estimated fair value. The current PEG Ratio is 1.60, which is 12% below median its 10-year median of 1.81 and 36.2% above the Metals & Mining industry median of 1.18. Sagardeep Alloys' overall GF Score™ is 75/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Sagardeep Alloys (NSE:SAGARDEEP), the current PEG Ratio is 1.60 as of Jul. 13, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Sagardeep Alloys (NSE:SAGARDEEP) Overvalued in 2026?
Based on GuruFocus' analysis, Sagardeep Alloys stock appears to be undervalued.
The current stock price of ₹24.47 is trading 35.7% below its estimated GF Value™ of ₹38.05.
GuruFocus considers Sagardeep Alloys to be Significantly Undervalued.
Key valuation signals for NSE:SAGARDEEP:
PEG Ratio: 1.60 (12% below median its 10-year median of 1.81)
GF Value™: ₹38.05 vs. price of ₹24.47 (35.7% below fair value)
Industry Position: 36.2% above the Metals & Mining median (#186 of 312)
No single metric tells the full story. See the NSE:SAGARDEEP stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Sagardeep Alloys Ltd is engaged in the business of Copper Items & Chemicals and Trading in Ferrous and Non-ferrous metals. It is also a wholesaler of metal and metal ores. It is engaged in the manufacturing and trading of copper alloys consumables, Copper pipes and tubes, Copper flats, Copper coils, Copper rods, Copper anodes, Copper nuggets and Copper plates and also trades in Stainless Steel sheets / coils, rods. It also produces various types of Copper and Copper Alloy products like sheet, pipe, tube, section, bus bar, etc.
75GF Score
Get the complete analysis for NSE:SAGARDEEP
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
NSE:SAGARDEEP has been successfully added to your 
