Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt. According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
The historical rank and industry rank for Gongin Precision Industrial Co's Debt-to-EBITDA or its related term are showing as below:
ROCO:3178'
s Debt-to-EBITDA Range Over the Past 10 Years
Min: 1.34 Med: 3.02 Max: 6.67
Current: 5.39
During the past 13 years, the highest Debt-to-EBITDA Ratio of Gongin Precision Industrial Co was 6.67. The lowest was 1.34. And the median was 3.02.
ROCO:3178's Debt-to-EBITDA is ranked worse than 80.76% of 2308
companies
in the Industrial Products industry
Industry Median: 1.69
vs ROCO:3178: 5.39
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt.
According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
Gongin Precision Industrial Co Debt-to-EBITDA Related Terms
Gongin Precision Industrial Co Debt-to-EBITDA Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Gongin Precision Industrial Co Debt-to-EBITDA Chart
ROCO:3178 vs SNA, RBC, LECO: Debt-to-EBITDA Comparison
For the Tools & Accessories subindustry, Gongin Precision Industrial Co's Debt-to-EBITDA, along with its competitors' market caps and Debt-to-EBITDA data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Gongin Precision Industrial Co Debt-to-EBITDA vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Gongin Precision Industrial Co's Debt-to-EBITDA distribution charts can be found below:
* The bar in red indicates where Gongin Precision Industrial Co's Debt-to-EBITDA falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual Debt-to-EBITDA, the EBITDA of the last fiscal year is used. In calculating the annualized quarterly data,
the EBITDA data used here is four times the quarterly (Jun. 2026) EBITDA data.
Gongin Precision Industrial Co (ROCO:3178) has a Debt-to-EBITDA of 3.97 as of Jun. 2026. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Gongin Precision Industrial Co. This is 31% above median its historical median of 3.02. Over the past decade, Gongin Precision Industrial Co's Debt-to-EBITDA has ranged from 1.34 to 6.67. According to the industry distribution chart, Gongin Precision Industrial Co ranks #1864 out of 2308 companies in the Industrial Products industry, placing it in the top 80.8%.
Is Gongin Precision Industrial Co's Debt-to-EBITDA too high?
Gongin Precision Industrial Co's current Debt-to-EBITDA of 3.97 is 31% above median its 10-year median of 3.02. Over the past 10 years, this metric has ranged from a low of 1.34 to a high of 6.67. The Industrial Products industry median Debt-to-EBITDA is 1.69. Gongin Precision Industrial Co's value of 3.97 is 134.9% above this industry median. Based on the distribution chart, Gongin Precision Industrial Co ranks #1864 out of 2308 companies in the Industrial Products industry, which is in the bottom quartile relative to peers. Overall, Gongin Precision Industrial Co has a GF Score™ of 69/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Gongin Precision Industrial Co's Debt-to-EBITDA compare to SNA and RBC?
According to the Industrial Products industry distribution chart, Gongin Precision Industrial Co ranks #1864 out of 2308 companies for Debt-to-EBITDA. This places Gongin Precision Industrial Co in the lower half of its industry. The industry median Debt-to-EBITDA is 1.69. Gongin Precision Industrial Co's value of 3.97 is 134.9% above this benchmark. Historically, Gongin Precision Industrial Co's own Debt-to-EBITDA has ranged from 1.34 to 6.67 over the past decade. While the company's 10-year median is 3.02 vs. the industry median of 1.69, Gongin Precision Industrial Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Debt-to-EBITDA for an Industrial Products company?
The median Debt-to-EBITDA among Industrial Products companies is 1.69, based on 2,308 companies in the industry. Companies in the top quartile (top 25%) have a Debt-to-EBITDA significantly above this median, while those in the bottom quartile fall well below. However, Debt-to-EBITDA should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Gongin Precision Industrial Co's current Debt-to-EBITDA of 3.97 is 134.9% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Debt-to-EBITDA mean?
A high Debt-to-EBITDA can signal that a stock is expensive relative to its fundamentals. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Gongin Precision Industrial Co. For the Industrial Products industry, the median Debt-to-EBITDA is 1.69 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Gongin Precision Industrial Co's current Debt-to-EBITDA is 3.97, which is 31% above median its own 10-year median of 3.02. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Gongin Precision Industrial Co stock overvalued right now?
Based on GuruFocus' analysis, Gongin Precision Industrial Co (ROCO:3178) is currently considered Modestly Undervalued. The stock's GF Value™ is NT$66.27, compared to a current price of NT$59.50 — trading 10.2% below its estimated fair value. The current Debt-to-EBITDA is 3.97, which is 31% above median its 10-year median of 3.02 and 134.9% above the Industrial Products industry median of 1.69. Gongin Precision Industrial Co's overall GF Score™ is 69/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Debt-to-EBITDA calculated?
Debt-to-EBITDA is calculated from a company's financial statements. For Gongin Precision Industrial Co (ROCO:3178), the current Debt-to-EBITDA is 3.97 as of Jun. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Gongin Precision Industrial Co (ROCO:3178) Overvalued in 2026?
Based on GuruFocus' analysis, Gongin Precision Industrial Co stock appears to be undervalued.
The current stock price of NT$59.50 is trading 10.2% below its estimated GF Value™ of NT$66.27.
GuruFocus considers Gongin Precision Industrial Co to be Modestly Undervalued.
Key valuation signals for ROCO:3178:
Debt-to-EBITDA: 3.97 (31% above median its 10-year median of 3.02)
GF Value™: NT$66.27 vs. price of NT$59.50 (10.2% below fair value)
Industry Position: 134.9% above the Industrial Products median (#1864 of 2308)
No single metric tells the full story. See the ROCO:3178 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Gongin Precision Industrial Co Ltd designs, manufactures and sells IC assembly molds and tools. Its products include Auto Mold Chase, M.G.P. Mold, Conventional Mold, Standard Module Components, Subsystem Assembly and Test, display equipment components and servo valve.
69GF Score
Get the complete analysis for ROCO:3178
Debt-to-EBITDA is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ROCO:3178 has been successfully added to your 
