Gongin Precision Industrial Co (ROCO:3178) Piotroski F-Score: 4 (As of Jul. 08, 2026) — 20% Below Median


ROCO:3178 Gongin Precision Industrial Co Ltd ROCO:3178
57 GF Score
Price NT$63.40
GF Value NT$63.04
Valuation Fairly Valued
! 8 Warning Signs
View Full Analysis

What is Gongin Precision Industrial Co Piotroski F-Score?

Gongin Precision Industrial Co ROCO:3178 -6.76% 57 Piotroski F-Score is 4 as of Jul. 08, 2026, which is 20% below its 10-year median of 5.00. GuruFocus rates ROCO:3178 with a GF Score™ of 57/100 and a GF Value™ of NT$63.04 (Fairly Valued). The stock has 8 warning signs investors should review. Among 2,975 Industrial Products companies, Gongin Precision Industrial Co ranks worse than 65.18% on this metric.

The zones of discrimination were as such:

Good or high score = 7, 8, 9
Bad or low score = 0, 1, 2, 3

Gongin Precision Industrial Co has an F-score of 4 indicating the company's financial situation is typical for a stable company.

The historical rank and industry rank for Gongin Precision Industrial Co's Piotroski F-Score or its related term are showing as below:

ROCO:3178' s Piotroski F-Score Range Over the Past 10 Years
Min: 1   Med: 5   Max: 8
Current: 4

During the past 13 years, the highest Piotroski F-Score of Gongin Precision Industrial Co was 8. The lowest was 1. And the median was 5.

Gongin Precision Industrial Co  (ROCO:3178) Piotroski F-Score Explanation

The developer of the system is Joseph D. Piotroski is relatively unknown accounting professor who shuns publicity and rarely gives interviews.

He graduated from the University of Illinois with a B.S. in accounting in 1989, received an M.B.A. from Indiana University in 1994. Five years later, in 1999, after earning a Ph.D. in accounting from the University of Michigan, he became an associate professor of accounting at the University of Chicago.

In 2000, he wrote a research paper called "Value Investing: The Use of Historical Financial Statement Information to Separate Winners from Losers" (pdf).

He wanted to see if he can develop a system (using a simple nine-point scoring system) that can increase the returns of a strategy of investing in low price to book (referred to in the paper as high book to market) value companies.

What he found was something that exceeded his most optimistic expectations.

Buying only those companies that scored highest (8 or 9) on his nine-point scale, or F-Score as he called it, over the 20 year period from 1976 to 1996 led to an average out-performance over the market of 13.4%.

Even more impressive were the results of a strategy of investing in the highest F-Score companies (8 or 9) and shorting companies with the lowest F-Score (0 or 1).

Over the same period from 1976 to 1996 (20 years) this strategy led to an average yearly return of 23%, substantially outperforming the average S&P 500 index return of 15.83% over the same period.


Gongin Precision Industrial Co Piotroski F-Score Related Terms


Gongin Precision Industrial Co Piotroski F-Score Historical Data

* Premium members only.

The historical data trend for Gongin Precision Industrial Co's Piotroski F-Score can be seen below:

* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD.
* For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.

Gongin Precision Industrial Co Piotroski F-Score Chart

Gongin Precision Industrial Co Annual Data
Trend Dec16 Dec17 Dec18 Dec19 Dec20 Dec21 Dec22 Dec23 Dec24 Dec25
Piotroski F-Score
Get a 7-Day Free Trial Premium Member Only Premium Member Only 5.00 8.00 6.00 5.00 4.00

Gongin Precision Industrial Co Quarterly Data
Mar21 Jun21 Sep21 Dec21 Mar22 Jun22 Sep22 Dec22 Mar23 Jun23 Sep23 Dec23 Mar24 Jun24 Sep24 Dec24 Mar25 Jun25 Sep25 Dec25
Piotroski F-Score Get a 7-Day Free Trial Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only 5.00 5.00 3.00 5.00 4.00

ROCO:3178 vs SNA, RBC, LECO: Piotroski F-Score Comparison

For the Tools & Accessories subindustry, Gongin Precision Industrial Co's Piotroski F-Score, along with its competitors' market caps and Piotroski F-Score data, can be viewed below:

* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.


Gongin Precision Industrial Co Piotroski F-Score vs Industrial Products Industry

For the Industrial Products industry and Industrials sector, Gongin Precision Industrial Co's Piotroski F-Score distribution charts can be found below:

* The bar in red indicates where Gongin Precision Industrial Co's Piotroski F-Score falls into.


ROCO:3178
57GF Score
Gongin Precision Industrial Co Ltd ROCO:3178
Piotroski F-Score is just one metric. See GF Score™, valuation, warning signs, and more.
View Full Analysis

How is the Piotroski F-Score calculated?

* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD.
* For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.

This Year (Dec25) TTM:Last Year (Dec24) TTM:
Net Income was 17.293 + -32.965 + 0.406 + -5.37 = NT$-21 Mil.
Cash Flow from Operations was -17.667 + 34.261 + 52.926 + 65.552 = NT$135 Mil.
Revenue was 322.311 + 322.908 + 319.29 + 291.802 = NT$1,256 Mil.
Gross Profit was 64.522 + 37.675 + 40.892 + 27.246 = NT$170 Mil.
Average Total Assets from the begining of this year (Dec24)
to the end of this year (Dec25) was
(2756.328 + 2738.642 + 2829.865 + 2776.069 + 2710.578) / 5 = NT$2762.2964 Mil.
Total Assets at the begining of this year (Dec24) was NT$2,756 Mil.
Long-Term Debt & Capital Lease Obligation was NT$833 Mil.
Total Current Assets was NT$930 Mil.
Total Current Liabilities was NT$618 Mil.
Net Income was 14.555 + 23.907 + -6.823 + 15.979 = NT$48 Mil.

Revenue was 300.927 + 373.738 + 309.379 + 330.086 = NT$1,314 Mil.
Gross Profit was 47.064 + 72.145 + 45.605 + 58.115 = NT$223 Mil.
Average Total Assets from the begining of last year (Dec23)
to the end of last year (Dec24) was
(2860.857 + 2836.251 + 2809.718 + 2860.419 + 2756.328) / 5 = NT$2824.7146 Mil.
Total Assets at the begining of last year (Dec23) was NT$2,861 Mil.
Long-Term Debt & Capital Lease Obligation was NT$812 Mil.
Total Current Assets was NT$938 Mil.
Total Current Liabilities was NT$638 Mil.

*Note: If the latest quarterly/semi-annual/annual total assets data is 0, then we will use previous quarterly/semi-annual/annual data for all the items in the balance sheet.

Profitability

Question 1. Return on Assets (ROA)

Net income before extraordinary items for the year divided by Total Assets at the beginning of the year.

Score 1 if positive, 0 if negative.

Gongin Precision Industrial Co's current Net Income (TTM) was -21. ==> Negative ==> Score 0.

Question 2. Cash Flow Return on Assets (CFROA)

Net cash flow from operating activities (operating cash flow) divided by Total Assets at the beginning of the year.

Score 1 if positive, 0 if negative.

Gongin Precision Industrial Co's current Cash Flow from Operations (TTM) was 135. ==> Positive ==> Score 1.

Question 3. Change in Return on Assets

Compare this year's return on assets (1) to last year's return on assets.

Score 1 if it's higher, 0 if it's lower.

ROA (This Year)=Net Income/Total Assets (Dec24)
=-20.636/2756.328
=-0.00748677

ROA (Last Year)=Net Income/Total Assets (Dec23)
=47.618/2860.857
=0.01664466

Gongin Precision Industrial Co's return on assets of this year was -0.00748677. Gongin Precision Industrial Co's return on assets of last year was 0.01664466. ==> Last year is higher ==> Score 0.

Question 4. Quality of Earnings (Accrual)

Compare Cash flow return on assets (2) to return on assets (1)

Score 1 if CFROA > ROA, 0 if CFROA <= ROA.

Gongin Precision Industrial Co's current Net Income (TTM) was -21. Gongin Precision Industrial Co's current Cash Flow from Operations (TTM) was 135. ==> 135 > -21 ==> CFROA > ROA ==> Score 1.

Funding

Question 5. Change in Gearing or Leverage

Compare this year's gearing (long-term debt divided by average total assets) to last year's gearing.

Score 0 if this year's gearing is higher, 1 otherwise.

Gearing (This Year: Dec25)=Long-Term Debt & Capital Lease Obligation/Average Total Assets from Dec24 to Dec25
=832.604/2762.2964
=0.30141733

Gearing (Last Year: Dec24)=Long-Term Debt & Capital Lease Obligation/Average Total Assets from Dec23 to Dec24
=811.501/2824.7146
=0.28728601

Gongin Precision Industrial Co's gearing of this year was 0.30141733. Gongin Precision Industrial Co's gearing of last year was 0.28728601. ==> Last year is lower than this year ==> Score 0.

Question 6. Change in Working Capital (Liquidity)

Compare this year's current ratio (current assets divided by current liabilities) to last year's current ratio.

Score 1 if this year's current ratio is higher, 0 if it's lower

Current Ratio (This Year: Dec25)=Total Current Assets/Total Current Liabilities
=929.785/617.51
=1.50570031

Current Ratio (Last Year: Dec24)=Total Current Assets/Total Current Liabilities
=937.903/637.865
=1.47037853

Gongin Precision Industrial Co's current ratio of this year was 1.50570031. Gongin Precision Industrial Co's current ratio of last year was 1.47037853. ==> This year's current ratio is higher. ==> Score 1.

Question 7. Change in Shares in Issue

Compare the number of shares in issue this year, to the number in issue last year.

Score 0 if there is larger number of shares in issue this year, 1 otherwise.

Gongin Precision Industrial Co's number of shares in issue this year was 45.054. Gongin Precision Industrial Co's number of shares in issue last year was 45.064. ==> There is smaller number of shares in issue this year, or the same. ==> Score 1.

Efficiency

Question 8. Change in Gross Margin

Compare this year's gross margin (Gross Profit divided by sales) to last year's.

Score 1 if this year's gross margin is higher, 0 if it's lower.

Gross Margin (This Year: TTM)=Gross Profit/Revenue
=170.335/1256.311
=0.13558347

Gross Margin (Last Year: TTM)=Gross Profit/Revenue
=222.929/1314.13
=0.16963999

Gongin Precision Industrial Co's gross margin of this year was 0.13558347. Gongin Precision Industrial Co's gross margin of last year was 0.16963999. ==> Last year's gross margin is higher ==> Score 0.

Question 9. Change in asset turnover

Compare this year's asset turnover (total sales for the year divided by total assets at the beginning of the year) to last year's asset turnover ratio.

Score 1 if this year's asset turnover ratio is higher, 0 if it's lower

Asset Turnover (This Year)=Revenue/Total Assets at the Beginning of This Year (Dec24)
=1256.311/2756.328
=0.45579155

Asset Turnover (Last Year)=Revenue/Total Assets at the Beginning of Last Year (Dec23)
=1314.13/2860.857
=0.45934837

Gongin Precision Industrial Co's asset turnover of this year was 0.45579155. Gongin Precision Industrial Co's asset turnover of last year was 0.45934837. ==> Last year's asset turnover is higher ==> Score 0.

Evaluation

Piotroski F-Score= Que. 1+ Que. 2+ Que. 3+Que. 4+Que. 5+Que. 6+Que. 7+Que. 8+Que. 9
=0+1+0+1+0+1+1+0+0
=4

Good or high score = 7, 8, 9
Bad or low score = 0, 1, 2, 3

Gongin Precision Industrial Co has an F-score of 4 indicating the company's financial situation is typical for a stable company.

Frequently Asked Questions Learn more about Piotroski F-Score →
What does a Piotroski F-Score of 4 mean?
Gongin Precision Industrial Co (ROCO:3178) has a Piotroski F-Score of 4 as of Jul. 08, 2026. The Piotroski F-score grades a company's business operating strength from 0-9. View historical data on Gongin Precision Industrial Co and its competitors. This is 20% below median its historical median of 5.00. Over the past decade, Gongin Precision Industrial Co's Piotroski F-Score has ranged from 1.00 to 8.00. According to the industry distribution chart, Gongin Precision Industrial Co ranks #1939 out of 2975 companies in the Industrial Products industry, placing it in the top 65.2%.
Is Gongin Precision Industrial Co's Piotroski F-Score too high?
Gongin Precision Industrial Co's current Piotroski F-Score of 4 is 20% below median its 10-year median of 5.00. Over the past 10 years, this metric has ranged from a low of 1.00 to a high of 8.00. The Industrial Products industry median Piotroski F-Score is 5.00. Gongin Precision Industrial Co's value of 4 is 20% below this industry median. Based on the distribution chart, Gongin Precision Industrial Co ranks #1939 out of 2975 companies in the Industrial Products industry, which is below the industry midpoint. Overall, Gongin Precision Industrial Co has a GF Score™ of 57/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Gongin Precision Industrial Co's Piotroski F-Score compare to SNA and RBC?
According to the Industrial Products industry distribution chart, Gongin Precision Industrial Co ranks #1939 out of 2975 companies for Piotroski F-Score. This places Gongin Precision Industrial Co in the lower half of its industry. The industry median Piotroski F-Score is 5.00. Gongin Precision Industrial Co's value of 4 is 20% below this benchmark. Historically, Gongin Precision Industrial Co's own Piotroski F-Score has ranged from 1.00 to 8.00 over the past decade. While the company's 10-year median is 5.00 vs. the industry median of 5.00, Gongin Precision Industrial Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Piotroski F-Score for an Industrial Products company?
The median Piotroski F-Score among Industrial Products companies is 5.00, based on 2,975 companies in the industry. Companies in the top quartile (top 25%) have a Piotroski F-Score significantly above this median, while those in the bottom quartile fall well below. However, Piotroski F-Score should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Gongin Precision Industrial Co's current Piotroski F-Score of 4 is 20% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Piotroski F-Score mean?
A high Piotroski F-Score can signal that a stock is expensive relative to its fundamentals. The Piotroski F-score grades a company's business operating strength from 0-9. View historical data on Gongin Precision Industrial Co and its competitors. For the Industrial Products industry, the median Piotroski F-Score is 5.00 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Gongin Precision Industrial Co's current Piotroski F-Score is 4, which is 20% below median its own 10-year median of 5.00. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Gongin Precision Industrial Co stock overvalued right now?
Based on GuruFocus' analysis, Gongin Precision Industrial Co (ROCO:3178) is currently considered Fairly Valued. The stock's GF Value™ is NT$63.04, compared to a current price of NT$63.40 — trading 0.6% above its estimated fair value. The current Piotroski F-Score is 4, which is 20% below median its 10-year median of 5.00 and 20% below the Industrial Products industry median of 5.00. Gongin Precision Industrial Co's overall GF Score™ is 57/100 with 8 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Piotroski F-Score calculated?
Piotroski F-Score is calculated from a company's financial statements. For Gongin Precision Industrial Co (ROCO:3178), the current Piotroski F-Score is 4 as of Jul. 08, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.

Is Gongin Precision Industrial Co (ROCO:3178) Overvalued in 2026?

Based on GuruFocus' analysis, Gongin Precision Industrial Co stock appears to be overvalued. The current stock price of NT$63.40 is trading 0.6% above its estimated GF Value™ of NT$63.04. GuruFocus considers Gongin Precision Industrial Co to be Fairly Valued.

Key valuation signals for ROCO:3178:

  • Piotroski F-Score: 4 (20% below median its 10-year median of 5.00)
  • GF Value™: NT$63.04 vs. price of NT$63.40 (0.6% above fair value)
  • GF Score™: 57/100 with 8 warning signs
  • Industry Position: 20% below the Industrial Products median (#1939 of 2975)

No single metric tells the full story. See the ROCO:3178 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.


Gongin Precision Industrial Co Business Description

Address No. 168, Bade 2nd Road, Wuhe Village, Kaohisung Hsien, TWN, 81453
Gongin Precision Industrial Co Ltd designs, manufactures and sells IC assembly molds and tools. Its products include Auto Mold Chase, M.G.P. Mold, Conventional Mold, Standard Module Components, Subsystem Assembly and Test, display equipment components and servo valve.
57GF Score

Get the complete analysis for ROCO:3178

Piotroski F-Score is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.

NT$63.40
Price
NT$63.04
GF Value