Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt. According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
The historical rank and industry rank for Shuz Tung Machinery Industrial Co's Debt-to-EBITDA or its related term are showing as below:
ROCO:4537'
s Debt-to-EBITDA Range Over the Past 10 Years
Min: -1227.47 Med: 7.09 Max: 36.82
Current: 3.37
During the past 13 years, the highest Debt-to-EBITDA Ratio of Shuz Tung Machinery Industrial Co was 36.82. The lowest was -1227.47. And the median was 7.09.
ROCO:4537's Debt-to-EBITDA is ranked worse than 69.72% of 2351
companies
in the Industrial Products industry
Industry Median: 1.71
vs ROCO:4537: 3.37
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt.
According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
Shuz Tung Machinery Industrial Co Debt-to-EBITDA Related Terms
Shuz Tung Machinery Industrial Co Debt-to-EBITDA Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Shuz Tung Machinery Industrial Co Debt-to-EBITDA Chart
ROCO:4537 vs GEV, ETN, PH: Debt-to-EBITDA Comparison
For the Specialty Industrial Machinery subindustry, Shuz Tung Machinery Industrial Co's Debt-to-EBITDA, along with its competitors' market caps and Debt-to-EBITDA data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Shuz Tung Machinery Industrial Co Debt-to-EBITDA vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Shuz Tung Machinery Industrial Co's Debt-to-EBITDA distribution charts can be found below:
* The bar in red indicates where Shuz Tung Machinery Industrial Co's Debt-to-EBITDA falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual Debt-to-EBITDA, the EBITDA of the last fiscal year is used. In calculating the annualized quarterly data,
the EBITDA data used here is two times the quarterly (Jun. 2026) EBITDA data.
Shuz Tung Machinery Industrial Co (ROCO:4537) has a Debt-to-EBITDA of 6.18 as of Jun. 2026. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Shuz Tung Machinery Industrial Co. This is 13% below median its historical median of 7.09. According to the industry distribution chart, Shuz Tung Machinery Industrial Co ranks #1639 out of 2351 companies in the Industrial Products industry, placing it in the top 69.7%.
Is Shuz Tung Machinery Industrial Co's Debt-to-EBITDA too high?
Shuz Tung Machinery Industrial Co's current Debt-to-EBITDA of 6.18 is 13% below median its 10-year median of 7.09. The Industrial Products industry median Debt-to-EBITDA is 1.71. Shuz Tung Machinery Industrial Co's value of 6.18 is 261.4% above this industry median. Based on the distribution chart, Shuz Tung Machinery Industrial Co ranks #1639 out of 2351 companies in the Industrial Products industry, which is below the industry midpoint. Overall, Shuz Tung Machinery Industrial Co has a GF Score™ of 46/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Shuz Tung Machinery Industrial Co's Debt-to-EBITDA compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Shuz Tung Machinery Industrial Co ranks #1639 out of 2351 companies for Debt-to-EBITDA. This places Shuz Tung Machinery Industrial Co in the lower half of its industry. The industry median Debt-to-EBITDA is 1.71. Shuz Tung Machinery Industrial Co's value of 6.18 is 261.4% above this benchmark. While the company's 10-year median is 7.09 vs. the industry median of 1.71, Shuz Tung Machinery Industrial Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Debt-to-EBITDA for an Industrial Products company?
The median Debt-to-EBITDA among Industrial Products companies is 1.71, based on 2,351 companies in the industry. Companies in the top quartile (top 25%) have a Debt-to-EBITDA significantly above this median, while those in the bottom quartile fall well below. However, Debt-to-EBITDA should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Shuz Tung Machinery Industrial Co's current Debt-to-EBITDA of 6.18 is 261.4% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Debt-to-EBITDA mean?
A high Debt-to-EBITDA can signal that a stock is expensive relative to its fundamentals. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Shuz Tung Machinery Industrial Co. For the Industrial Products industry, the median Debt-to-EBITDA is 1.71 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Shuz Tung Machinery Industrial Co's current Debt-to-EBITDA is 6.18, which is 13% below median its own 10-year median of 7.09. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Shuz Tung Machinery Industrial Co stock overvalued right now?
Based on GuruFocus' analysis, Shuz Tung Machinery Industrial Co (ROCO:4537) is currently considered Significantly Overvalued. The stock's GF Value™ is NT$39.54, compared to a current price of NT$132.00 — trading 233.8% above its estimated fair value. The current Debt-to-EBITDA is 6.18, which is 13% below median its 10-year median of 7.09 and 261.4% above the Industrial Products industry median of 1.71. Shuz Tung Machinery Industrial Co's overall GF Score™ is 46/100 with 2 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Debt-to-EBITDA calculated?
Debt-to-EBITDA is calculated from a company's financial statements. For Shuz Tung Machinery Industrial Co (ROCO:4537), the current Debt-to-EBITDA is 6.18 as of Jun. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Shuz Tung Machinery Industrial Co (ROCO:4537) Overvalued in 2026?
Based on GuruFocus' analysis, Shuz Tung Machinery Industrial Co stock appears to be overvalued.
The current stock price of NT$132.00 is trading 233.8% above its estimated GF Value™ of NT$39.54.
GuruFocus considers Shuz Tung Machinery Industrial Co to be Significantly Overvalued.
Key valuation signals for ROCO:4537:
Debt-to-EBITDA: 6.18 (13% below median its 10-year median of 7.09)
GF Value™: NT$39.54 vs. price of NT$132.00 (233.8% above fair value)
Industry Position: 261.4% above the Industrial Products median (#1639 of 2351)
No single metric tells the full story. See the ROCO:4537 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Shuz Tung Machinery Industrial Co Ltd is a Taiwan based manufacturer of various machinery and automation equipment. It is specialized in tube processing, manufacturing of tube bending machines, turn-key equipment for bicycles, tubes for furniture, electronic equipment and others. The company's products include pipe/tube bender, bicycle machinery, end forming machinery, auto cell, electronic equipment and hydroforming OEM. The entity sells its products all around the world.
46GF Score
Get the complete analysis for ROCO:4537
Debt-to-EBITDA is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ROCO:4537 has been successfully added to your 
