ROCO:4537'
s Quick Ratio Range Over the Past 10 Years
Min: 0.74 Med: 0.93 Max: 1.3
Current: 1.18
During the past 13 years, Shuz Tung Machinery Industrial Co's highest Quick Ratio was 1.30. The lowest was 0.74. And the median was 0.93.
ROCO:4537's Quick Ratio is ranked worse than 60.66% of 3071
companies
in the Industrial Products industry
Industry Median: 1.39
vs ROCO:4537: 1.18
Shuz Tung Machinery Industrial Co (ROCO:4537) Quick Ratio Explanation
The quick ratio is more conservative than the Current Ratio because it excludes inventories from current assets. The ratio derives its name presumably from the fact that assets such as cash and marketable securities are quick sources of cash. Inventories generally take time to be converted into cash, and if they have to be sold quickly, the company may have to accept a lower price than book value of these inventories. As a result, they are justifiably excluded from assets that are ready sources of immediate cash.
In general, low or decreasing quick ratios generally suggest that a company is over-leveraged, struggling to maintain or grow sales, paying bills too quickly or collecting receivables too slowly. On the other hand, a high or increasing quick ratio generally indicates that a company is experiencing solid top-line growth, quickly converting receivables into cash, and easily able to cover its financial obligations. Such companies often have faster inventory turnover and cash conversion cycles.
The higher the quick ratio, the better the company's liquidity position.
Shuz Tung Machinery Industrial Co Quick Ratio Related Terms
Shuz Tung Machinery Industrial Co Quick Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Shuz Tung Machinery Industrial Co Quick Ratio Chart
For the Specialty Industrial Machinery subindustry, Shuz Tung Machinery Industrial Co's Quick Ratio, along with its competitors' market caps and Quick Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Shuz Tung Machinery Industrial Co Quick Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Shuz Tung Machinery Industrial Co's Quick Ratio distribution charts can be found below:
* The bar in red indicates where Shuz Tung Machinery Industrial Co's Quick Ratio falls into.
Shuz Tung Machinery Industrial Co Quick Ratio Calculation
The quick ratio measures a company's ability to meet its short-term obligations with its most liquid assets. For this reason, the ratio excludes inventories from current assets.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Shuz Tung Machinery Industrial Co (ROCO:4537) has a Quick Ratio of 1.18 as of Dec. 2025. Quick ratio is the ratio of current assets less inventory to current liabilities. View historical data on Shuz Tung Machinery Industrial Co and its competitors. This is 27% above median its historical median of 0.93. Over the past decade, Shuz Tung Machinery Industrial Co's Quick Ratio has ranged from 0.74 to 1.30. According to the industry distribution chart, Shuz Tung Machinery Industrial Co ranks #1863 out of 3071 companies in the Industrial Products industry, placing it in the top 60.7%.
Is Shuz Tung Machinery Industrial Co's Quick Ratio too high?
Shuz Tung Machinery Industrial Co's current Quick Ratio of 1.18 is 27% above median its 10-year median of 0.93. Over the past 10 years, this metric has ranged from a low of 0.74 to a high of 1.30. The Industrial Products industry median Quick Ratio is 1.39. Shuz Tung Machinery Industrial Co's value of 1.18 is 15.1% below this industry median. Based on the distribution chart, Shuz Tung Machinery Industrial Co ranks #1863 out of 3071 companies in the Industrial Products industry, which is below the industry midpoint. Overall, Shuz Tung Machinery Industrial Co has a GF Score™ of 40/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Shuz Tung Machinery Industrial Co's Quick Ratio compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Shuz Tung Machinery Industrial Co ranks #1863 out of 3071 companies for Quick Ratio. This places Shuz Tung Machinery Industrial Co in the lower half of its industry. The industry median Quick Ratio is 1.39. Shuz Tung Machinery Industrial Co's value of 1.18 is 15.1% below this benchmark. Historically, Shuz Tung Machinery Industrial Co's own Quick Ratio has ranged from 0.74 to 1.30 over the past decade. While the company's 10-year median is 0.93 vs. the industry median of 1.39, Shuz Tung Machinery Industrial Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Quick Ratio for an Industrial Products company?
The median Quick Ratio among Industrial Products companies is 1.39, based on 3,071 companies in the industry. Companies in the top quartile (top 25%) have a Quick Ratio significantly above this median, while those in the bottom quartile fall well below. However, Quick Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Shuz Tung Machinery Industrial Co's current Quick Ratio of 1.18 is 15.1% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Quick Ratio mean?
A high Quick Ratio can signal that a stock is expensive relative to its fundamentals. Quick ratio is the ratio of current assets less inventory to current liabilities. View historical data on Shuz Tung Machinery Industrial Co and its competitors. For the Industrial Products industry, the median Quick Ratio is 1.39 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Shuz Tung Machinery Industrial Co's current Quick Ratio is 1.18, which is 27% above median its own 10-year median of 0.93. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Shuz Tung Machinery Industrial Co stock overvalued right now?
Based on GuruFocus' analysis, Shuz Tung Machinery Industrial Co (ROCO:4537) is currently considered Significantly Overvalued. The stock's GF Value™ is NT$28.22, compared to a current price of NT$176.00 — trading 523.7% above its estimated fair value. The current Quick Ratio is 1.18, which is 27% above median its 10-year median of 0.93 and 15.1% below the Industrial Products industry median of 1.39. Shuz Tung Machinery Industrial Co's overall GF Score™ is 40/100 with 9 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Quick Ratio calculated?
Quick Ratio is calculated from a company's financial statements. For Shuz Tung Machinery Industrial Co (ROCO:4537), the current Quick Ratio is 1.18 as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Shuz Tung Machinery Industrial Co (ROCO:4537) Overvalued in 2026?
Based on GuruFocus' analysis, Shuz Tung Machinery Industrial Co stock appears to be overvalued.
The current stock price of NT$176.00 is trading 523.7% above its estimated GF Value™ of NT$28.22.
GuruFocus considers Shuz Tung Machinery Industrial Co to be Significantly Overvalued.
Key valuation signals for ROCO:4537:
Quick Ratio: 1.18 (27% above median its 10-year median of 0.93)
GF Value™: NT$28.22 vs. price of NT$176.00 (523.7% above fair value)
Industry Position: 15.1% below the Industrial Products median (#1863 of 3071)
No single metric tells the full story. See the ROCO:4537 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Shuz Tung Machinery Industrial Co Business Description
Shuz Tung Machinery Industrial Co Ltd is a Taiwan based manufacturer of various machinery and automation equipment. It is specialized in tube processing, manufacturing of tube bending machines, turn-key equipment for bicycles, tubes for furniture, electronic equipment and others. The company's products include pipe/tube bender, bicycle machinery, end forming machinery, auto cell, electronic equipment and hydroforming OEM. The entity sells its products all around the world.
40GF Score
Get the complete analysis for ROCO:4537
Quick Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ROCO:4537 has been successfully added to your 
