Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Kenturn Nano Tec CoROCO:4561 +0.34%81 Debt-to-EBITDA is 2.11 as of Jun. 2026, which is 52% below its 10-year median of 4.42. GuruFocus rates ROCO:4561 with a GF Score™ of 81/100 and a GF Value™ of NT$40.46 (Fairly Valued). The stock has 6 warning signs investors should review. Among 2,333 Industrial Products companies, Kenturn Nano Tec Co ranks worse than 69.1% on this metric.
Debt-to-EBITDA measures a company's ability to pay off its debt.
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt. According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
The historical rank and industry rank for Kenturn Nano Tec Co's Debt-to-EBITDA or its related term are showing as below:
ROCO:4561'
s Debt-to-EBITDA Range Over the Past 10 Years
Min: 2.05 Med: 4.42 Max: 6.03
Current: 3.26
During the past 13 years, the highest Debt-to-EBITDA Ratio of Kenturn Nano Tec Co was 6.03. The lowest was 2.05. And the median was 4.42.
ROCO:4561's Debt-to-EBITDA is ranked worse than 69.1% of 2333
companies
in the Industrial Products industry
Industry Median: 1.69
vs ROCO:4561: 3.26
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt.
According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
Kenturn Nano Tec Co Debt-to-EBITDA Related Terms
Kenturn Nano Tec Co Debt-to-EBITDA Historical Data
* Premium members only.
The historical data trend for Kenturn Nano Tec Co's Debt-to-EBITDA can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
ROCO:4561 vs ATI, CRS, MLI: Debt-to-EBITDA Comparison
For the Metal Fabrication subindustry, Kenturn Nano Tec Co's Debt-to-EBITDA, along with its competitors' market caps and Debt-to-EBITDA data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Kenturn Nano Tec Co Debt-to-EBITDA vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Kenturn Nano Tec Co's Debt-to-EBITDA distribution charts can be found below:
* The bar in red indicates where Kenturn Nano Tec Co's Debt-to-EBITDA falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual Debt-to-EBITDA, the EBITDA of the last fiscal year is used. In calculating the annualized quarterly data,
the EBITDA data used here is four times the quarterly (Jun. 2026) EBITDA data.
Kenturn Nano Tec Co (ROCO:4561) has a Debt-to-EBITDA of 2.11 as of Jun. 2026. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Kenturn Nano Tec Co. This is 52% below median its historical median of 4.42. Over the past decade, Kenturn Nano Tec Co's Debt-to-EBITDA has ranged from 2.05 to 6.03. According to the industry distribution chart, Kenturn Nano Tec Co ranks #1612 out of 2333 companies in the Industrial Products industry, placing it in the top 69.1%.
Is Kenturn Nano Tec Co's Debt-to-EBITDA too high?
Kenturn Nano Tec Co's current Debt-to-EBITDA of 2.11 is 52% below median its 10-year median of 4.42. Over the past 10 years, this metric has ranged from a low of 2.05 to a high of 6.03. The Industrial Products industry median Debt-to-EBITDA is 1.69. Kenturn Nano Tec Co's value of 2.11 is 24.9% above this industry median. Based on the distribution chart, Kenturn Nano Tec Co ranks #1612 out of 2333 companies in the Industrial Products industry, which is below the industry midpoint. Overall, Kenturn Nano Tec Co has a GF Score™ of 81/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Kenturn Nano Tec Co's Debt-to-EBITDA compare to ATI and CRS?
According to the Industrial Products industry distribution chart, Kenturn Nano Tec Co ranks #1612 out of 2333 companies for Debt-to-EBITDA. This places Kenturn Nano Tec Co in the lower half of its industry. The industry median Debt-to-EBITDA is 1.69. Kenturn Nano Tec Co's value of 2.11 is 24.9% above this benchmark. Historically, Kenturn Nano Tec Co's own Debt-to-EBITDA has ranged from 2.05 to 6.03 over the past decade. While the company's 10-year median is 4.42 vs. the industry median of 1.69, Kenturn Nano Tec Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Debt-to-EBITDA for an Industrial Products company?
The median Debt-to-EBITDA among Industrial Products companies is 1.69, based on 2,333 companies in the industry. Companies in the top quartile (top 25%) have a Debt-to-EBITDA significantly above this median, while those in the bottom quartile fall well below. However, Debt-to-EBITDA should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Kenturn Nano Tec Co's current Debt-to-EBITDA of 2.11 is 24.9% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Debt-to-EBITDA mean?
A high Debt-to-EBITDA can signal that a stock is expensive relative to its fundamentals. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Kenturn Nano Tec Co. For the Industrial Products industry, the median Debt-to-EBITDA is 1.69 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Kenturn Nano Tec Co's current Debt-to-EBITDA is 2.11, which is 52% below median its own 10-year median of 4.42. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Kenturn Nano Tec Co stock overvalued right now?
Based on GuruFocus' analysis, Kenturn Nano Tec Co (ROCO:4561) is currently considered Fairly Valued. The stock's GF Value™ is NT$40.46, compared to a current price of NT$43.65 — trading 7.9% above its estimated fair value. The current Debt-to-EBITDA is 2.11, which is 52% below median its 10-year median of 4.42 and 24.9% above the Industrial Products industry median of 1.69. Kenturn Nano Tec Co's overall GF Score™ is 81/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Debt-to-EBITDA calculated?
Debt-to-EBITDA is calculated from a company's financial statements. For Kenturn Nano Tec Co (ROCO:4561), the current Debt-to-EBITDA is 2.11 as of Jun. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Kenturn Nano Tec Co (ROCO:4561) Overvalued in 2026?
Based on GuruFocus' analysis, Kenturn Nano Tec Co stock appears to be overvalued.
The current stock price of NT$43.65 is trading 7.9% above its estimated GF Value™ of NT$40.46.
GuruFocus considers Kenturn Nano Tec Co to be Fairly Valued.
Key valuation signals for ROCO:4561:
Debt-to-EBITDA: 2.11 (52% below median its 10-year median of 4.42)
GF Value™: NT$40.46 vs. price of NT$43.65 (7.9% above fair value)
Industry Position: 24.9% above the Industrial Products median (#1612 of 2333)
No single metric tells the full story. See the ROCO:4561 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Kenturn Nano Tec Co Ltd designs, manufactures and markets machine tool spindles. Its products include cnc machining center spindles, turning center spindles, cnc surface grinding spindles and built-in motor spindles. Geographically the company generates the majority of its revenue from China, followed by Taiwan, India, and Other. The company has two reportable segments: Precision Machinery Parts Department and Consumables Department. The precision machinery parts and consumables department is mainly engaged in the manufacturing, sales, testing and other manufacturing of precision machinery.
81GF Score
Get the complete analysis for ROCO:4561
Debt-to-EBITDA is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ROCO:4561 has been successfully added to your 
