Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Kenturn Nano Tec CoROCO:4561 -1.39%83 ROA % is 3.20% as of Dec. 2025, which is 39% below its 10-year median of 5.28. GuruFocus rates ROCO:4561 with a GF Score™ of 83/100 and a GF Value™ of NT$32.99 (Modestly Overvalued). The stock has 5 warning signs investors should review. Among 3,074 Industrial Products companies, Kenturn Nano Tec Co ranks worse than 61.22% on this metric.
ROA % is calculated as Net Income divided by its average Total Assets over a certain period of time. Kenturn Nano Tec Co's annualizedNet Income for the quarter that ended in Dec. 2025 was NT$70.5 Mil.
Kenturn Nano Tec Co's average Total Assets over the quarter that ended in Dec. 2025 was NT$2,204.2 Mil. Therefore, Kenturn Nano Tec Co's annualized ROA % for the quarter that ended in Dec. 2025 was 3.20%.
The historical rank and industry rank for Kenturn Nano Tec Co's ROA % or its related term are showing as below:
ROCO:4561'
s ROA % Range Over the Past 10 Years
Min: 1.52 Med: 5.28 Max: 8.09
Current: 1.68
During the past 13 years, Kenturn Nano Tec Co's highest ROA % was 8.09%. The lowest was 1.52%. And the median was 5.28%.
ROCO:4561's ROA % is ranked worse than 61.22% of 3074
companies
in the Industrial Products industry
Industry Median: 3.045
vs ROCO:4561: 1.68
Kenturn Nano Tec Co (ROCO:4561) ROA % Explanation
ROA % measures the rate of return on the total assets (shareholder equity plus liabilities). It measures a firm's efficiency at generating profits from shareholders' equity plus its liabilities. ROA % shows how well a company uses what it has to generate earnings. ROA %s can vary drastically across industries. Therefore, ROA % should not be used to compare companies in different industries. For retailers, a ROA % of higher than 5% is expected. For example, Wal-Mart (WMT) has a ROA % of about 8% as of 2012. For banks, ROA % is close to their interest spread. A banks ROA % is typically well under 2%.
Similar to ROE, ROA % is affected by profit margins and asset turnover. This can be seen from the Du Pont Formula:
Note:
The Net Income data used here is four times the quarterly (Dec. 2025) net income data. The Revenue data used here is four times the quarterly (Dec. 2025) revenue data.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Be Aware
Like ROE, ROA % is calculated with only 12 months data. Fluctuations in the company's earnings or business cycles can affect the ratio drastically. It is important to look at the ratio from a long term perspective. ROA % can be affected by events such as stock buyback or issuance, and by goodwill, a company's tax rate and its interest payment. ROA % may not reflect the true earning power of the assets. A more accurate measurement is ROC % (ROC).
Many analysts argue the higher return the better. Buffett states that really high ROA % may indicate vulnerability in the durability of the competitive advantage.
E.g. Raising $43b to take on KO is impossible, but $1.7b to take on Moody's is. Although Moody's ROA % and underlying economics is far superior to Coca Cola, the durability is far weaker because of lower entry cost.
Kenturn Nano Tec Co ROA % Related Terms
Kenturn Nano Tec Co ROA % Historical Data
* Premium members only.
The historical data trend for Kenturn Nano Tec Co's ROA % can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Metal Fabrication subindustry, Kenturn Nano Tec Co's ROA %, along with its competitors' market caps and ROA % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Kenturn Nano Tec Co ROA % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Kenturn Nano Tec Co's ROA % distribution charts can be found below:
* The bar in red indicates where Kenturn Nano Tec Co's ROA % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual ROA %, the net income of the last fiscal year and the average total assets over the fiscal year are used. In calculating the quarterly data,
the Net Income data used here is four times the quarterly (Dec. 2025) net income data.
ROA % is displayed in the 30-year financial page.
Kenturn Nano Tec Co (ROCO:4561) has a ROA % of 3.20% as of Dec. 2025. Return on assets is the ratio of current-period net income to average two-period total assets. View historical data on Kenturn Nano Tec Co and its competitors. This is 39% below median its historical median of 5.28. Over the past decade, Kenturn Nano Tec Co's ROA % has ranged from 1.52 to 8.09. According to the industry distribution chart, Kenturn Nano Tec Co ranks #1882 out of 3074 companies in the Industrial Products industry, placing it in the top 61.2%.
Is Kenturn Nano Tec Co's ROA % too high?
Kenturn Nano Tec Co's current ROA % of 3.20% is 39% below median its 10-year median of 5.28. Over the past 10 years, this metric has ranged from a low of 1.52 to a high of 8.09. The Industrial Products industry median ROA % is 3.05. Kenturn Nano Tec Co's value of 3.20% is 5.1% above this industry median. Based on the distribution chart, Kenturn Nano Tec Co ranks #1882 out of 3074 companies in the Industrial Products industry, which is below the industry midpoint. Overall, Kenturn Nano Tec Co has a GF Score™ of 83/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Kenturn Nano Tec Co's ROA % compare to CRS and ATI?
According to the Industrial Products industry distribution chart, Kenturn Nano Tec Co ranks #1882 out of 3074 companies for ROA %. This places Kenturn Nano Tec Co in the lower half of its industry. The industry median ROA % is 3.05. Kenturn Nano Tec Co's value of 3.20% is 5.1% above this benchmark. Historically, Kenturn Nano Tec Co's own ROA % has ranged from 1.52 to 8.09 over the past decade. While the company's 10-year median is 5.28 vs. the industry median of 3.05, Kenturn Nano Tec Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good ROA % for an Industrial Products company?
The median ROA % among Industrial Products companies is 3.05, based on 3,074 companies in the industry. Companies in the top quartile (top 25%) have a ROA % significantly above this median, while those in the bottom quartile fall well below. However, ROA % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Kenturn Nano Tec Co's current ROA % of 3.20% is 5.1% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high ROA % mean?
A high ROA % can signal that a stock is expensive relative to its fundamentals. Return on assets is the ratio of current-period net income to average two-period total assets. View historical data on Kenturn Nano Tec Co and its competitors. For the Industrial Products industry, the median ROA % is 3.05 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Kenturn Nano Tec Co's current ROA % is 3.20%, which is 39% below median its own 10-year median of 5.28. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Kenturn Nano Tec Co stock overvalued right now?
Based on GuruFocus' analysis, Kenturn Nano Tec Co (ROCO:4561) is currently considered Modestly Overvalued. The stock's GF Value™ is NT$32.99, compared to a current price of NT$39.00 — trading 18.2% above its estimated fair value. The current ROA % is 3.20%, which is 39% below median its 10-year median of 5.28 and 5.1% above the Industrial Products industry median of 3.05. Kenturn Nano Tec Co's overall GF Score™ is 83/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is ROA % calculated?
ROA % is calculated from a company's financial statements. For Kenturn Nano Tec Co (ROCO:4561), the current ROA % is 3.20% as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Kenturn Nano Tec Co (ROCO:4561) Overvalued in 2026?
Based on GuruFocus' analysis, Kenturn Nano Tec Co stock appears to be overvalued.
The current stock price of NT$39.00 is trading 18.2% above its estimated GF Value™ of NT$32.99.
GuruFocus considers Kenturn Nano Tec Co to be Modestly Overvalued.
Key valuation signals for ROCO:4561:
ROA %: 3.20% (39% below median its 10-year median of 5.28)
GF Value™: NT$32.99 vs. price of NT$39.00 (18.2% above fair value)
Industry Position: 5.1% above the Industrial Products median (#1882 of 3074)
No single metric tells the full story. See the ROCO:4561 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Kenturn Nano Tec Co Ltd designs, manufactures and markets machine tool spindles. Its products include cnc machining center spindles, turning center spindles, cnc surface grinding spindles and built-in motor spindles. Geographically the company generates the majority of its revenue from China, followed by Taiwan, India, and Other. The company has two reportable segments: Precision Machinery Parts Department and Consumables Department. The precision machinery parts and consumables department is mainly engaged in the manufacturing, sales, testing and other manufacturing of precision machinery.
83GF Score
Get the complete analysis for ROCO:4561
ROA % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ROCO:4561 has been successfully added to your 
