Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Kenturn Nano Tec CoROCO:4561 -1.39%83 OCF Yield % is 4.33 as of Jul. 16, 2026, which is 51% below its 10-year median of 8.86. GuruFocus rates ROCO:4561 with a GF Score™ of 83/100 and a GF Value™ of NT$32.99 (Modestly Overvalued). The stock has 5 warning signs investors should review. Among 3,070 Industrial Products companies, Kenturn Nano Tec Co ranks better than 58.24% on this metric.
OCF Yield % is calculated as Cash Flow from Operations divided by Market Capitalization. It is a financial solvency ratio that compares the operating cash flow a company is expected to earn against its market value.
Similar to Earnings Yield %, OCF Yield % is financial solvency ratio. A lower ratio suggests a less attractive investment, indicating that investors might not receive substantial returns in proportion to their investment. Conversely, a high operating cash flow yield signals that a company generates sufficient cash to comfortably meet its debts, obligations, and dividend payments, making it a promising investment choice.
Kenturn Nano Tec Co OCF Yield % Related Terms
Kenturn Nano Tec Co OCF Yield % Historical Data
* Premium members only.
The historical data trend for Kenturn Nano Tec Co's OCF Yield % can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
ROCO:4561 vs CRS, ATI, MLI: OCF Yield % Comparison
For the Metal Fabrication subindustry, Kenturn Nano Tec Co's OCF Yield %, along with its competitors' market caps and OCF Yield % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Kenturn Nano Tec Co OCF Yield % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Kenturn Nano Tec Co's OCF Yield % distribution charts can be found below:
* The bar in red indicates where Kenturn Nano Tec Co's OCF Yield % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Kenturn Nano Tec Co (ROCO:4561) has a OCF Yield % of 4.33 as of Jul. 16, 2026. OCF Yield is calculated as Cash Flow from Operations divided by Market Capitalization. View historical data on Kenturn Nano Tec Co and its competitors. This is 51% below median its historical median of 8.86. Over the past decade, Kenturn Nano Tec Co's OCF Yield % has ranged from 1.48 to 21.77. According to the industry distribution chart, Kenturn Nano Tec Co ranks #1282 out of 3070 companies in the Industrial Products industry, placing it in the top 41.8%.
Is Kenturn Nano Tec Co's OCF Yield % too high?
Kenturn Nano Tec Co's current OCF Yield % of 4.33 is 51% below median its 10-year median of 8.86. Over the past 10 years, this metric has ranged from a low of 1.48 to a high of 21.77. The Industrial Products industry median OCF Yield % is 3.06. Kenturn Nano Tec Co's value of 4.33 is 41.5% above this industry median. Based on the distribution chart, Kenturn Nano Tec Co ranks #1282 out of 3070 companies in the Industrial Products industry, which is above the industry midpoint. Overall, Kenturn Nano Tec Co has a GF Score™ of 83/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Kenturn Nano Tec Co's OCF Yield % compare to CRS and ATI?
According to the Industrial Products industry distribution chart, Kenturn Nano Tec Co ranks #1282 out of 3070 companies for OCF Yield %. This puts Kenturn Nano Tec Co in the upper half of its industry. The industry median OCF Yield % is 3.06. Kenturn Nano Tec Co's value of 4.33 is 41.5% above this benchmark. Historically, Kenturn Nano Tec Co's own OCF Yield % has ranged from 1.48 to 21.77 over the past decade. While the company's 10-year median is 8.86 vs. the industry median of 3.06, Kenturn Nano Tec Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good OCF Yield % for an Industrial Products company?
The median OCF Yield % among Industrial Products companies is 3.06, based on 3,070 companies in the industry. Companies in the top quartile (top 25%) have a OCF Yield % significantly above this median, while those in the bottom quartile fall well below. However, OCF Yield % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Kenturn Nano Tec Co's current OCF Yield % of 4.33 is 41.5% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high OCF Yield % mean?
A high OCF Yield % can signal that a stock is expensive relative to its fundamentals. OCF Yield is calculated as Cash Flow from Operations divided by Market Capitalization. View historical data on Kenturn Nano Tec Co and its competitors. For the Industrial Products industry, the median OCF Yield % is 3.06 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Kenturn Nano Tec Co's current OCF Yield % is 4.33, which is 51% below median its own 10-year median of 8.86. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Kenturn Nano Tec Co stock overvalued right now?
Based on GuruFocus' analysis, Kenturn Nano Tec Co (ROCO:4561) is currently considered Modestly Overvalued. The stock's GF Value™ is NT$32.99, compared to a current price of NT$39.00 — trading 18.2% above its estimated fair value. The current OCF Yield % is 4.33, which is 51% below median its 10-year median of 8.86 and 41.5% above the Industrial Products industry median of 3.06. Kenturn Nano Tec Co's overall GF Score™ is 83/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is OCF Yield % calculated?
OCF Yield % is calculated from a company's financial statements. For Kenturn Nano Tec Co (ROCO:4561), the current OCF Yield % is 4.33 as of Jul. 16, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Kenturn Nano Tec Co (ROCO:4561) Overvalued in 2026?
Based on GuruFocus' analysis, Kenturn Nano Tec Co stock appears to be overvalued.
The current stock price of NT$39.00 is trading 18.2% above its estimated GF Value™ of NT$32.99.
GuruFocus considers Kenturn Nano Tec Co to be Modestly Overvalued.
Key valuation signals for ROCO:4561:
OCF Yield %: 4.33 (51% below median its 10-year median of 8.86)
GF Value™: NT$32.99 vs. price of NT$39.00 (18.2% above fair value)
Industry Position: 41.5% above the Industrial Products median (#1282 of 3070)
No single metric tells the full story. See the ROCO:4561 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Kenturn Nano Tec Co Ltd designs, manufactures and markets machine tool spindles. Its products include cnc machining center spindles, turning center spindles, cnc surface grinding spindles and built-in motor spindles. Geographically the company generates the majority of its revenue from China, followed by Taiwan, India, and Other. The company has two reportable segments: Precision Machinery Parts Department and Consumables Department. The precision machinery parts and consumables department is mainly engaged in the manufacturing, sales, testing and other manufacturing of precision machinery.
83GF Score
Get the complete analysis for ROCO:4561
OCF Yield % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ROCO:4561 has been successfully added to your 
