Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt. According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
The historical rank and industry rank for Sirtec International Co's Debt-to-EBITDA or its related term are showing as below:
ROCO:5356'
s Debt-to-EBITDA Range Over the Past 10 Years
Min: 0.16 Med: 0.35 Max: 3.19
Current: 0.58
During the past 13 years, the highest Debt-to-EBITDA Ratio of Sirtec International Co was 3.19. The lowest was 0.16. And the median was 0.35.
ROCO:5356's Debt-to-EBITDA is ranked better than 72.26% of 1806
companies
in the Hardware industry
Industry Median: 1.69
vs ROCO:5356: 0.58
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt.
According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
Sirtec International Co Debt-to-EBITDA Related Terms
Sirtec International Co Debt-to-EBITDA Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
ROCO:5356 vs APH, GLW, TEL: Debt-to-EBITDA Comparison
For the Electronic Components subindustry, Sirtec International Co's Debt-to-EBITDA, along with its competitors' market caps and Debt-to-EBITDA data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Sirtec International Co Debt-to-EBITDA vs Hardware Industry
For the Hardware industry and Technology sector, Sirtec International Co's Debt-to-EBITDA distribution charts can be found below:
* The bar in red indicates where Sirtec International Co's Debt-to-EBITDA falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual Debt-to-EBITDA, the EBITDA of the last fiscal year is used. In calculating the annualized quarterly data,
the EBITDA data used here is four times the quarterly (Jun. 2026) EBITDA data.
Sirtec International Co (ROCO:5356) has a Debt-to-EBITDA of 0.49 as of Jun. 2026. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Sirtec International Co. This is 40% above median its historical median of 0.35. Over the past decade, Sirtec International Co's Debt-to-EBITDA has ranged from 0.16 to 3.19. According to the industry distribution chart, Sirtec International Co ranks #501 out of 1806 companies in the Hardware industry, placing it in the top 27.7%.
Is Sirtec International Co's Debt-to-EBITDA too high?
Sirtec International Co's current Debt-to-EBITDA of 0.49 is 40% above median its 10-year median of 0.35. Over the past 10 years, this metric has ranged from a low of 0.16 to a high of 3.19. The Hardware industry median Debt-to-EBITDA is 1.69. Sirtec International Co's value of 0.49 is 71% below this industry median. Based on the distribution chart, Sirtec International Co ranks #501 out of 1806 companies in the Hardware industry, which is above the industry midpoint. Overall, Sirtec International Co has a GF Score™ of 72/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Sirtec International Co's Debt-to-EBITDA compare to APH and GLW?
According to the Hardware industry distribution chart, Sirtec International Co ranks #501 out of 1806 companies for Debt-to-EBITDA. This puts Sirtec International Co in the upper half of its industry. The industry median Debt-to-EBITDA is 1.69. Sirtec International Co's value of 0.49 is 71% below this benchmark. Historically, Sirtec International Co's own Debt-to-EBITDA has ranged from 0.16 to 3.19 over the past decade. While the company's 10-year median is 0.35 vs. the industry median of 1.69, Sirtec International Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Debt-to-EBITDA for a Hardware company?
The median Debt-to-EBITDA among Hardware companies is 1.69, based on 1,806 companies in the industry. Companies in the top quartile (top 25%) have a Debt-to-EBITDA significantly above this median, while those in the bottom quartile fall well below. However, Debt-to-EBITDA should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Sirtec International Co's current Debt-to-EBITDA of 0.49 is 71% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Debt-to-EBITDA mean?
A high Debt-to-EBITDA can signal that a stock is expensive relative to its fundamentals. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Sirtec International Co. For the Hardware industry, the median Debt-to-EBITDA is 1.69 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Sirtec International Co's current Debt-to-EBITDA is 0.49, which is 40% above median its own 10-year median of 0.35. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Sirtec International Co stock overvalued right now?
Based on GuruFocus' analysis, Sirtec International Co (ROCO:5356) is currently considered Fairly Valued. The stock's GF Value™ is NT$27.94, compared to a current price of NT$26.00 — trading 6.9% below its estimated fair value. The current Debt-to-EBITDA is 0.49, which is 40% above median its 10-year median of 0.35 and 71% below the Hardware industry median of 1.69. Sirtec International Co's overall GF Score™ is 72/100 with 4 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Debt-to-EBITDA calculated?
Debt-to-EBITDA is calculated from a company's financial statements. For Sirtec International Co (ROCO:5356), the current Debt-to-EBITDA is 0.49 as of Jun. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Sirtec International Co (ROCO:5356) Overvalued in 2026?
Based on GuruFocus' analysis, Sirtec International Co stock appears to be undervalued.
The current stock price of NT$26.00 is trading 6.9% below its estimated GF Value™ of NT$27.94.
GuruFocus considers Sirtec International Co to be Fairly Valued.
Key valuation signals for ROCO:5356:
Debt-to-EBITDA: 0.49 (40% above median its 10-year median of 0.35)
GF Value™: NT$27.94 vs. price of NT$26.00 (6.9% below fair value)
Industry Position: 71% below the Hardware median (#501 of 1806)
No single metric tells the full story. See the ROCO:5356 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Sirtec International Co Ltd is engaged in electronic design, mold design, and manufacturing. In addition, it is also involved in electronic product assembly, plastic injection and molding, product processing, and manufacturing. Geographically, the company generates a majority of revenue from China and the rest from Taiwan.
72GF Score
Get the complete analysis for ROCO:5356
Debt-to-EBITDA is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ROCO:5356 has been successfully added to your 
