Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Laser Tek Taiwan CoROCO:6207 +6.73%57 Debt-to-EBITDA is 3.20 as of Jun. 2026, which is 49% below its 10-year median of 6.23. GuruFocus rates ROCO:6207 with a GF Score™ of 57/100 and a GF Value™ of NT$44.39 (Significantly Overvalued). The stock has 6 warning signs investors should review. Among 1,799 Hardware companies, Laser Tek Taiwan Co ranks worse than 82.6% on this metric.
Debt-to-EBITDA measures a company's ability to pay off its debt.
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt. According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
The historical rank and industry rank for Laser Tek Taiwan Co's Debt-to-EBITDA or its related term are showing as below:
ROCO:6207'
s Debt-to-EBITDA Range Over the Past 10 Years
Min: 3.3 Med: 6.23 Max: 11.17
Current: 5.85
During the past 13 years, the highest Debt-to-EBITDA Ratio of Laser Tek Taiwan Co was 11.17. The lowest was 3.30. And the median was 6.23.
ROCO:6207's Debt-to-EBITDA is ranked worse than 82.6% of 1799
companies
in the Hardware industry
Industry Median: 1.72
vs ROCO:6207: 5.85
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt.
According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
Laser Tek Taiwan Co Debt-to-EBITDA Related Terms
Laser Tek Taiwan Co Debt-to-EBITDA Historical Data
* Premium members only.
The historical data trend for Laser Tek Taiwan Co's Debt-to-EBITDA can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
ROCO:6207 vs APH, GLW, TEL: Debt-to-EBITDA Comparison
For the Electronic Components subindustry, Laser Tek Taiwan Co's Debt-to-EBITDA, along with its competitors' market caps and Debt-to-EBITDA data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Laser Tek Taiwan Co Debt-to-EBITDA vs Hardware Industry
For the Hardware industry and Technology sector, Laser Tek Taiwan Co's Debt-to-EBITDA distribution charts can be found below:
* The bar in red indicates where Laser Tek Taiwan Co's Debt-to-EBITDA falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual Debt-to-EBITDA, the EBITDA of the last fiscal year is used. In calculating the annualized quarterly data,
the EBITDA data used here is four times the quarterly (Jun. 2026) EBITDA data.
Laser Tek Taiwan Co (ROCO:6207) has a Debt-to-EBITDA of 3.20 as of Jun. 2026. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Laser Tek Taiwan Co. This is 49% below median its historical median of 6.23. Over the past decade, Laser Tek Taiwan Co's Debt-to-EBITDA has ranged from 3.30 to 11.17. According to the industry distribution chart, Laser Tek Taiwan Co ranks #1486 out of 1799 companies in the Hardware industry, placing it in the top 82.6%.
Is Laser Tek Taiwan Co's Debt-to-EBITDA too high?
Laser Tek Taiwan Co's current Debt-to-EBITDA of 3.20 is 49% below median its 10-year median of 6.23. Over the past 10 years, this metric has ranged from a low of 3.30 to a high of 11.17. The Hardware industry median Debt-to-EBITDA is 1.72. Laser Tek Taiwan Co's value of 3.20 is 86% above this industry median. Based on the distribution chart, Laser Tek Taiwan Co ranks #1486 out of 1799 companies in the Hardware industry, which is in the bottom quartile relative to peers. Overall, Laser Tek Taiwan Co has a GF Score™ of 57/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Laser Tek Taiwan Co's Debt-to-EBITDA compare to APH and GLW?
According to the Hardware industry distribution chart, Laser Tek Taiwan Co ranks #1486 out of 1799 companies for Debt-to-EBITDA. This places Laser Tek Taiwan Co in the lower half of its industry. The industry median Debt-to-EBITDA is 1.72. Laser Tek Taiwan Co's value of 3.20 is 86% above this benchmark. Historically, Laser Tek Taiwan Co's own Debt-to-EBITDA has ranged from 3.30 to 11.17 over the past decade. While the company's 10-year median is 6.23 vs. the industry median of 1.72, Laser Tek Taiwan Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Debt-to-EBITDA for a Hardware company?
The median Debt-to-EBITDA among Hardware companies is 1.72, based on 1,799 companies in the industry. Companies in the top quartile (top 25%) have a Debt-to-EBITDA significantly above this median, while those in the bottom quartile fall well below. However, Debt-to-EBITDA should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Laser Tek Taiwan Co's current Debt-to-EBITDA of 3.20 is 86% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Debt-to-EBITDA mean?
A high Debt-to-EBITDA can signal that a stock is expensive relative to its fundamentals. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Laser Tek Taiwan Co. For the Hardware industry, the median Debt-to-EBITDA is 1.72 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Laser Tek Taiwan Co's current Debt-to-EBITDA is 3.20, which is 49% below median its own 10-year median of 6.23. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Laser Tek Taiwan Co stock overvalued right now?
Based on GuruFocus' analysis, Laser Tek Taiwan Co (ROCO:6207) is currently considered Significantly Overvalued. The stock's GF Value™ is NT$44.39, compared to a current price of NT$111.00 — trading 150.1% above its estimated fair value. The current Debt-to-EBITDA is 3.20, which is 49% below median its 10-year median of 6.23 and 86% above the Hardware industry median of 1.72. Laser Tek Taiwan Co's overall GF Score™ is 57/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Debt-to-EBITDA calculated?
Debt-to-EBITDA is calculated from a company's financial statements. For Laser Tek Taiwan Co (ROCO:6207), the current Debt-to-EBITDA is 3.20 as of Jun. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Laser Tek Taiwan Co (ROCO:6207) Overvalued in 2026?
Based on GuruFocus' analysis, Laser Tek Taiwan Co stock appears to be overvalued.
The current stock price of NT$111.00 is trading 150.1% above its estimated GF Value™ of NT$44.39.
GuruFocus considers Laser Tek Taiwan Co to be Significantly Overvalued.
Key valuation signals for ROCO:6207:
Debt-to-EBITDA: 3.20 (49% below median its 10-year median of 6.23)
GF Value™: NT$44.39 vs. price of NT$111.00 (150.1% above fair value)
Industry Position: 86% above the Hardware median (#1486 of 1799)
No single metric tells the full story. See the ROCO:6207 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Laser Tek Taiwan Co Ltd is engaged in the manufacturing, processing, and sale of surface mount devices (SMD), surface mount technology (SMT) equipment, enterprise intelligent information systems, and laser precision, the manufacturing, processing, and sales of laser trimming machines, the design, and sales of the testing probe cards and the manufacturing and processing of printing materials. The group has three reportable segments: SMD, Equipment, and Other. The majority of its revenue is generated from the Equipment segment. Geographically, it derives maximum revenue from Taiwan, followed by Mainland China, and other regions.
57GF Score
Get the complete analysis for ROCO:6207
Debt-to-EBITDA is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ROCO:6207 has been successfully added to your 
