Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Laser Tek Taiwan CoROCO:6207 -7.12%51 EBITDA Margin % is 16.33% as of Dec. 2025, which is 13% below its 10-year median of 18.77. GuruFocus rates ROCO:6207 with a GF Score™ of 51/100 and a GF Value™ of NT$38.53 (Significantly Overvalued). The stock has 6 warning signs investors should review. Among 2,477 Hardware companies, Laser Tek Taiwan Co ranks better than 77.88% on this metric.
EBITDA Margin % is calculated as EBITDA divided by its Revenue. Laser Tek Taiwan Co's EBITDA for the
three
months ended in Dec. 2025 was NT$39 Mil. Laser Tek Taiwan Co's Revenue for the
three
months ended in Dec. 2025 was NT$242 Mil. Therefore, Laser Tek Taiwan Co's EBITDA margin for the quarter that ended in Dec. 2025 was 16.33%.
Laser Tek Taiwan Co (ROCO:6207) EBITDA Margin % Explanation
EBITDA Margin % is the ratio of EBITDA divided by net sales or Revenue. It is an performance metric measuring company's operating profitability. EBITDA Margin takes depreciation and amortization, interest expense and tax into account, which makes it easy to compare the relative profitability of companies of different sizes in the same industry.
Laser Tek Taiwan Co EBITDA Margin % Related Terms
Laser Tek Taiwan Co EBITDA Margin % Historical Data
* Premium members only.
The historical data trend for Laser Tek Taiwan Co's EBITDA Margin % can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Electronic Components subindustry, Laser Tek Taiwan Co's EBITDA Margin %, along with its competitors' market caps and EBITDA Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Laser Tek Taiwan Co EBITDA Margin % vs Hardware Industry
For the Hardware industry and Technology sector, Laser Tek Taiwan Co's EBITDA Margin % distribution charts can be found below:
* The bar in red indicates where Laser Tek Taiwan Co's EBITDA Margin % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Laser Tek Taiwan Co (ROCO:6207) has a EBITDA Margin % of 16.33% as of Dec. 2025. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Laser Tek Taiwan Co and its competitors. This is 13% below median its historical median of 18.77. Over the past decade, Laser Tek Taiwan Co's EBITDA Margin % has ranged from 12.27 to 24.96. According to the industry distribution chart, Laser Tek Taiwan Co ranks #548 out of 2477 companies in the Hardware industry, placing it in the top 22.1%.
Is Laser Tek Taiwan Co's EBITDA Margin % too high?
Laser Tek Taiwan Co's current EBITDA Margin % of 16.33% is 13% below median its 10-year median of 18.77. Over the past 10 years, this metric has ranged from a low of 12.27 to a high of 24.96. The Hardware industry median EBITDA Margin % is 7.01. Laser Tek Taiwan Co's value of 16.33% is 133% above this industry median. Based on the distribution chart, Laser Tek Taiwan Co ranks #548 out of 2477 companies in the Hardware industry, which is in the top quartile — a strong position relative to peers. Overall, Laser Tek Taiwan Co has a GF Score™ of 51/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Laser Tek Taiwan Co's EBITDA Margin % compare to APH and GLW?
According to the Hardware industry distribution chart, Laser Tek Taiwan Co ranks #548 out of 2477 companies for EBITDA Margin %. This places Laser Tek Taiwan Co in the top 22% of its industry — outperforming the majority of peers. The industry median EBITDA Margin % is 7.01. Laser Tek Taiwan Co's value of 16.33% is 133% above this benchmark. Historically, Laser Tek Taiwan Co's own EBITDA Margin % has ranged from 12.27 to 24.96 over the past decade. While the company's 10-year median is 18.77 vs. the industry median of 7.01, Laser Tek Taiwan Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EBITDA Margin % for a Hardware company?
The median EBITDA Margin % among Hardware companies is 7.01, based on 2,477 companies in the industry. Companies in the top quartile (top 25%) have a EBITDA Margin % significantly above this median, while those in the bottom quartile fall well below. However, EBITDA Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Laser Tek Taiwan Co's current EBITDA Margin % of 16.33% is 133% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EBITDA Margin % mean?
A high EBITDA Margin % can signal that a stock is expensive relative to its fundamentals. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Laser Tek Taiwan Co and its competitors. For the Hardware industry, the median EBITDA Margin % is 7.01 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Laser Tek Taiwan Co's current EBITDA Margin % is 16.33%, which is 13% below median its own 10-year median of 18.77. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Laser Tek Taiwan Co stock overvalued right now?
Based on GuruFocus' analysis, Laser Tek Taiwan Co (ROCO:6207) is currently considered Significantly Overvalued. The stock's GF Value™ is NT$38.53, compared to a current price of NT$130.50 — trading 238.7% above its estimated fair value. The current EBITDA Margin % is 16.33%, which is 13% below median its 10-year median of 18.77 and 133% above the Hardware industry median of 7.01. Laser Tek Taiwan Co's overall GF Score™ is 51/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EBITDA Margin % calculated?
EBITDA Margin % is calculated from a company's financial statements. For Laser Tek Taiwan Co (ROCO:6207), the current EBITDA Margin % is 16.33% as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Laser Tek Taiwan Co (ROCO:6207) Overvalued in 2026?
Based on GuruFocus' analysis, Laser Tek Taiwan Co stock appears to be overvalued.
The current stock price of NT$130.50 is trading 238.7% above its estimated GF Value™ of NT$38.53.
GuruFocus considers Laser Tek Taiwan Co to be Significantly Overvalued.
Key valuation signals for ROCO:6207:
EBITDA Margin %: 16.33% (13% below median its 10-year median of 18.77)
GF Value™: NT$38.53 vs. price of NT$130.50 (238.7% above fair value)
Industry Position: 133% above the Hardware median (#548 of 2477)
No single metric tells the full story. See the ROCO:6207 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Laser Tek Taiwan Co Ltd is engaged in the manufacturing, processing, and sale of surface mount devices (SMD), surface mount technology (SMT) equipment, enterprise intelligent information systems, and laser precision, the manufacturing, processing, and sales of laser trimming machines, the design, and sales of the testing probe cards and the manufacturing and processing of printing materials. The group has three reportable segments: SMD, Equipment, and Other. The majority of its revenue is generated from the Equipment segment. Geographically, it derives maximum revenue from Taiwan, followed by Mainland China, and other regions.
51GF Score
Get the complete analysis for ROCO:6207
EBITDA Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ROCO:6207 has been successfully added to your 
