Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Onano IndustrialTPE:6405 -0.12%43 Debt-to-EBITDA is 0.01 as of Jun. 2026, which is 100% below its 10-year median of 3.60. GuruFocus rates TPE:6405 with a GF Score™ of 43/100 and a GF Value™ of NT$0.15 (Significantly Overvalued). The stock has 3 warning signs investors should review. Among 1,814 Hardware companies, Onano Industrial ranks better than 95.2% on this metric.
Debt-to-EBITDA measures a company's ability to pay off its debt.
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt. According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
The historical rank and industry rank for Onano Industrial's Debt-to-EBITDA or its related term are showing as below:
TPE:6405'
s Debt-to-EBITDA Range Over the Past 10 Years
Min: 0.05 Med: 3.6 Max: 4.97
Current: 0.05
During the past 13 years, the highest Debt-to-EBITDA Ratio of Onano Industrial was 4.97. The lowest was 0.05. And the median was 3.60.
TPE:6405's Debt-to-EBITDA is ranked better than 95.2% of 1814
companies
in the Hardware industry
Industry Median: 1.645
vs TPE:6405: 0.05
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt.
According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
Onano Industrial Debt-to-EBITDA Related Terms
Onano Industrial Debt-to-EBITDA Historical Data
* Premium members only.
The historical data trend for Onano Industrial's Debt-to-EBITDA can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
TPE:6405 vs APH, GLW, TEL: Debt-to-EBITDA Comparison
For the Electronic Components subindustry, Onano Industrial's Debt-to-EBITDA, along with its competitors' market caps and Debt-to-EBITDA data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Onano Industrial Debt-to-EBITDA vs Hardware Industry
For the Hardware industry and Technology sector, Onano Industrial's Debt-to-EBITDA distribution charts can be found below:
* The bar in red indicates where Onano Industrial's Debt-to-EBITDA falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual Debt-to-EBITDA, the EBITDA of the last fiscal year is used. In calculating the annualized quarterly data,
the EBITDA data used here is four times the quarterly (Jun. 2026) EBITDA data.
Onano Industrial (TPE:6405) has a Debt-to-EBITDA of 0.01 as of Jun. 2026. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Onano Industrial. This is 100% below median its historical median of 3.60. Over the past decade, Onano Industrial's Debt-to-EBITDA has ranged from 0.05 to 4.97. According to the industry distribution chart, Onano Industrial ranks #87 out of 1814 companies in the Hardware industry, placing it in the top 4.8%.
Is Onano Industrial's Debt-to-EBITDA too high?
Onano Industrial's current Debt-to-EBITDA of 0.01 is 100% below median its 10-year median of 3.60. Over the past 10 years, this metric has ranged from a low of 0.05 to a high of 4.97. The Hardware industry median Debt-to-EBITDA is 1.65. Onano Industrial's value of 0.01 is 99.4% below this industry median. Based on the distribution chart, Onano Industrial ranks #87 out of 1814 companies in the Hardware industry, which is in the top quartile — a strong position relative to peers. Overall, Onano Industrial has a GF Score™ of 43/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Onano Industrial's Debt-to-EBITDA compare to APH and GLW?
According to the Hardware industry distribution chart, Onano Industrial ranks #87 out of 1814 companies for Debt-to-EBITDA. This places Onano Industrial in the top 5% of its industry — outperforming the majority of peers. The industry median Debt-to-EBITDA is 1.65. Onano Industrial's value of 0.01 is 99.4% below this benchmark. Historically, Onano Industrial's own Debt-to-EBITDA has ranged from 0.05 to 4.97 over the past decade. While the company's 10-year median is 3.60 vs. the industry median of 1.65, Onano Industrial has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Debt-to-EBITDA for a Hardware company?
The median Debt-to-EBITDA among Hardware companies is 1.65, based on 1,814 companies in the industry. Companies in the top quartile (top 25%) have a Debt-to-EBITDA significantly above this median, while those in the bottom quartile fall well below. However, Debt-to-EBITDA should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Onano Industrial's current Debt-to-EBITDA of 0.01 is 99.4% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Debt-to-EBITDA mean?
A high Debt-to-EBITDA can signal that a stock is expensive relative to its fundamentals. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Onano Industrial. For the Hardware industry, the median Debt-to-EBITDA is 1.65 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Onano Industrial's current Debt-to-EBITDA is 0.01, which is 100% below median its own 10-year median of 3.60. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Onano Industrial stock overvalued right now?
Based on GuruFocus' analysis, Onano Industrial (TPE:6405) is currently considered Significantly Overvalued. The stock's GF Value™ is NT$0.15, compared to a current price of NT$40.25 — trading 26733.3% above its estimated fair value. The current Debt-to-EBITDA is 0.01, which is 100% below median its 10-year median of 3.60 and 99.4% below the Hardware industry median of 1.65. Onano Industrial's overall GF Score™ is 43/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Debt-to-EBITDA calculated?
Debt-to-EBITDA is calculated from a company's financial statements. For Onano Industrial (TPE:6405), the current Debt-to-EBITDA is 0.01 as of Jun. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Onano Industrial (TPE:6405) Overvalued in 2026?
Based on GuruFocus' analysis, Onano Industrial stock appears to be overvalued.
The current stock price of NT$40.25 is trading 26733.3% above its estimated GF Value™ of NT$0.15.
GuruFocus considers Onano Industrial to be Significantly Overvalued.
Key valuation signals for TPE:6405:
Debt-to-EBITDA: 0.01 (100% below median its 10-year median of 3.60)
GF Value™: NT$0.15 vs. price of NT$40.25 (26733.3% above fair value)
Industry Position: 99.4% below the Hardware median (#87 of 1814)
No single metric tells the full story. See the TPE:6405 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Onano Industrial Corp manufactures and sells photoelectric thinned glass products. The Company's activities include a chemical method of slimming, polishing, and ITO processing. The products are mainly used in smart mobile phones and tablets, Mobile devices such as ultra-thin notebook computers. The Company earns revenue from slimmed opto-electronic glass generated in Taiwan.
43GF Score
Get the complete analysis for TPE:6405
Debt-to-EBITDA is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:6405 has been successfully added to your 
