Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt. According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
The historical rank and industry rank for Kuroda Precision Industries's Debt-to-EBITDA or its related term are showing as below:
TSE:7726'
s Debt-to-EBITDA Range Over the Past 10 Years
Min: 1.76 Med: 3.48 Max: 8.35
Current: 7.74
During the past 13 years, the highest Debt-to-EBITDA Ratio of Kuroda Precision Industries was 8.35. The lowest was 1.76. And the median was 3.48.
TSE:7726's Debt-to-EBITDA is ranked worse than 86.6% of 2350
companies
in the Industrial Products industry
Industry Median: 1.695
vs TSE:7726: 7.74
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt.
According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
Kuroda Precision Industries Debt-to-EBITDA Related Terms
Kuroda Precision Industries Debt-to-EBITDA Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
TSE:7726 vs SNA, RBC, SWK: Debt-to-EBITDA Comparison
For the Tools & Accessories subindustry, Kuroda Precision Industries's Debt-to-EBITDA, along with its competitors' market caps and Debt-to-EBITDA data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Kuroda Precision Industries Debt-to-EBITDA vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Kuroda Precision Industries's Debt-to-EBITDA distribution charts can be found below:
* The bar in red indicates where Kuroda Precision Industries's Debt-to-EBITDA falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual Debt-to-EBITDA, the EBITDA of the last fiscal year is used. In calculating the annualized quarterly data,
the EBITDA data used here is four times the quarterly (Mar. 2026) EBITDA data.
Kuroda Precision Industries (TSE:7726) has a Debt-to-EBITDA of 2.53 as of Mar. 2026. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Kuroda Precision Industries. This is 27% below median its historical median of 3.48. Over the past decade, Kuroda Precision Industries' Debt-to-EBITDA has ranged from 1.76 to 8.35. According to the industry distribution chart, Kuroda Precision Industries ranks #2035 out of 2350 companies in the Industrial Products industry, placing it in the top 86.6%.
Is Kuroda Precision Industries' Debt-to-EBITDA too high?
Kuroda Precision Industries' current Debt-to-EBITDA of 2.53 is 27% below median its 10-year median of 3.48. Over the past 10 years, this metric has ranged from a low of 1.76 to a high of 8.35. The Industrial Products industry median Debt-to-EBITDA is 1.70. Kuroda Precision Industries' value of 2.53 is 49.3% above this industry median. Based on the distribution chart, Kuroda Precision Industries ranks #2035 out of 2350 companies in the Industrial Products industry, which is in the bottom quartile relative to peers. Overall, Kuroda Precision Industries has a GF Score™ of 64/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Kuroda Precision Industries' Debt-to-EBITDA compare to SNA and RBC?
According to the Industrial Products industry distribution chart, Kuroda Precision Industries ranks #2035 out of 2350 companies for Debt-to-EBITDA. This places Kuroda Precision Industries in the lower half of its industry. The industry median Debt-to-EBITDA is 1.70. Kuroda Precision Industries' value of 2.53 is 49.3% above this benchmark. Historically, Kuroda Precision Industries' own Debt-to-EBITDA has ranged from 1.76 to 8.35 over the past decade. While the company's 10-year median is 3.48 vs. the industry median of 1.70, Kuroda Precision Industries has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Debt-to-EBITDA for an Industrial Products company?
The median Debt-to-EBITDA among Industrial Products companies is 1.70, based on 2,350 companies in the industry. Companies in the top quartile (top 25%) have a Debt-to-EBITDA significantly above this median, while those in the bottom quartile fall well below. However, Debt-to-EBITDA should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Kuroda Precision Industries's current Debt-to-EBITDA of 2.53 is 49.3% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Debt-to-EBITDA mean?
A high Debt-to-EBITDA can signal that a stock is expensive relative to its fundamentals. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Kuroda Precision Industries. For the Industrial Products industry, the median Debt-to-EBITDA is 1.70 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Kuroda Precision Industries's current Debt-to-EBITDA is 2.53, which is 27% below median its own 10-year median of 3.48. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Kuroda Precision Industries stock overvalued right now?
Based on GuruFocus' analysis, Kuroda Precision Industries (TSE:7726) is currently considered Fairly Valued. The stock's GF Value™ is 円1,278.80, compared to a current price of 円1,304.00 — trading 2% above its estimated fair value. The current Debt-to-EBITDA is 2.53, which is 27% below median its 10-year median of 3.48 and 49.3% above the Industrial Products industry median of 1.70. Kuroda Precision Industries' overall GF Score™ is 64/100 with 8 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Debt-to-EBITDA calculated?
Debt-to-EBITDA is calculated from a company's financial statements. For Kuroda Precision Industries (TSE:7726), the current Debt-to-EBITDA is 2.53 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Kuroda Precision Industries (TSE:7726) Overvalued in 2026?
Based on GuruFocus' analysis, Kuroda Precision Industries stock appears to be overvalued.
The current stock price of 円1,304.00 is trading 2% above its estimated GF Value™ of 円1,278.80.
GuruFocus considers Kuroda Precision Industries to be Fairly Valued.
Key valuation signals for TSE:7726:
Debt-to-EBITDA: 2.53 (27% below median its 10-year median of 3.48)
GF Value™: 円1,278.80 vs. price of 円1,304.00 (2% above fair value)
Industry Position: 49.3% above the Industrial Products median (#2035 of 2350)
No single metric tells the full story. See the TSE:7726 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Kuroda Precision Industries Ltd operates as a gauge manufacturer in Japan. The company's product includes gauges, ball screws, tool holders, press tools, machine tools, lubricating oil supply devices for semi-dry processing, and ultra-precision measuring systems, among others. Its reportable segments are Drive Systems, Mold Systems, and Mechanical and Measurement Systems. Maximum revenue for the company is generated from its Mold Systems segment, which manufactures laminated precision press dies, precision metal press products, motor cores, etc. Geographically, a majority of its revenue is derived from its business in Japan, followed by China, the United States, Mexico, Europe, and other regions.
64GF Score
Get the complete analysis for TSE:7726
Debt-to-EBITDA is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TSE:7726 has been successfully added to your 
