Kuroda Precision IndustriesTSE:7726 -2.03%62 Gross Margin % is 19.65% as of Mar. 2026, which is 21% below its 10-year median of 24.75. GuruFocus rates TSE:7726 with a GF Score™ of 62/100 and a GF Value™ of 円1,252.12 (Modestly Overvalued). The stock has 10 warning signs investors should review. Among 2,999 Industrial Products companies, Kuroda Precision Industries ranks worse than 68.82% on this metric.
Warren Buffett believes that firms with excellent long term economics tend to have consistently higher margins.
Durable competitive advantage creates a high Gross Margin % because of the freedom to price in excess of cost. Companies can be categorized by their Gross Margin %
1. Greater than 40% = Durable competitive advantage
2. Less than 40% = Competition eroding margins
3. Less than 20% = no sustainable competitive advantage
Consistency of Gross Margin is key
Kuroda Precision Industries had a gross margin of 19.65% for the quarter that ended in Mar. 2026 => No sustainable competitive advantage
Be Aware
If a company loses its competitive advantages, usually its gross margin declines well before its sales declines. Watching Gross Margin % and Operating Margin % closely helps avoid value trap situations.
Kuroda Precision Industries Gross Margin % Related Terms
Kuroda Precision Industries Gross Margin % Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
TSE:7726 vs SNA, RBC, LECO: Gross Margin % Comparison
For the Tools & Accessories subindustry, Kuroda Precision Industries's Gross Margin %, along with its competitors' market caps and Gross Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Kuroda Precision Industries Gross Margin % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Kuroda Precision Industries's Gross Margin % distribution charts can be found below:
* The bar in red indicates where Kuroda Precision Industries's Gross Margin % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
A positive Gross Profit is only the first step for a company to make a net profit. The gross profit needs to be big enough to also cover related labor, equipment, rental, marketing/advertising, research and development and a lot of other costs in selling the products.
Kuroda Precision Industries (TSE:7726) has a Gross Margin % of 19.65% as of Mar. 2026. Gross margin is the ratio of total gross profit to net sales. View historical data on Kuroda Precision Industries and its competitors. This is 21% below median its historical median of 24.75. Over the past decade, Kuroda Precision Industries' Gross Margin % has ranged from 19.96 to 28.79. According to the industry distribution chart, Kuroda Precision Industries ranks #2064 out of 2999 companies in the Industrial Products industry, placing it in the top 68.8%.
Is Kuroda Precision Industries' Gross Margin % too high?
Kuroda Precision Industries' current Gross Margin % of 19.65% is 21% below median its 10-year median of 24.75. Over the past 10 years, this metric has ranged from a low of 19.96 to a high of 28.79. The Industrial Products industry median Gross Margin % is 26.85. Kuroda Precision Industries' value of 19.65% is 26.8% below this industry median. Based on the distribution chart, Kuroda Precision Industries ranks #2064 out of 2999 companies in the Industrial Products industry, which is below the industry midpoint. Overall, Kuroda Precision Industries has a GF Score™ of 62/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Kuroda Precision Industries' Gross Margin % compare to SNA and RBC?
According to the Industrial Products industry distribution chart, Kuroda Precision Industries ranks #2064 out of 2999 companies for Gross Margin %. This places Kuroda Precision Industries in the lower half of its industry. The industry median Gross Margin % is 26.85. Kuroda Precision Industries' value of 19.65% is 26.8% below this benchmark. Historically, Kuroda Precision Industries' own Gross Margin % has ranged from 19.96 to 28.79 over the past decade. While the company's 10-year median is 24.75 vs. the industry median of 26.85, Kuroda Precision Industries has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Gross Margin % for an Industrial Products company?
The median Gross Margin % among Industrial Products companies is 26.85, based on 2,999 companies in the industry. Companies in the top quartile (top 25%) have a Gross Margin % significantly above this median, while those in the bottom quartile fall well below. However, Gross Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Kuroda Precision Industries's current Gross Margin % of 19.65% is 26.8% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Gross Margin % mean?
A high Gross Margin % can signal that a stock is expensive relative to its fundamentals. Gross margin is the ratio of total gross profit to net sales. View historical data on Kuroda Precision Industries and its competitors. For the Industrial Products industry, the median Gross Margin % is 26.85 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Kuroda Precision Industries's current Gross Margin % is 19.65%, which is 21% below median its own 10-year median of 24.75. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Kuroda Precision Industries stock overvalued right now?
Based on GuruFocus' analysis, Kuroda Precision Industries (TSE:7726) is currently considered Modestly Overvalued. The stock's GF Value™ is 円1,252.12, compared to a current price of 円1,401.00 — trading 11.9% above its estimated fair value. The current Gross Margin % is 19.65%, which is 21% below median its 10-year median of 24.75 and 26.8% below the Industrial Products industry median of 26.85. Kuroda Precision Industries' overall GF Score™ is 62/100 with 10 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Gross Margin % calculated?
Gross Margin % is calculated from a company's financial statements. For Kuroda Precision Industries (TSE:7726), the current Gross Margin % is 19.65% as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Kuroda Precision Industries (TSE:7726) Overvalued in 2026?
Based on GuruFocus' analysis, Kuroda Precision Industries stock appears to be overvalued.
The current stock price of 円1,401.00 is trading 11.9% above its estimated GF Value™ of 円1,252.12.
GuruFocus considers Kuroda Precision Industries to be Modestly Overvalued.
Key valuation signals for TSE:7726:
Gross Margin %: 19.65% (21% below median its 10-year median of 24.75)
GF Value™: 円1,252.12 vs. price of 円1,401.00 (11.9% above fair value)
Industry Position: 26.8% below the Industrial Products median (#2064 of 2999)
No single metric tells the full story. See the TSE:7726 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Kuroda Precision Industries Ltd operates as a gauge manufacturer in Japan. The company's product includes gauges, ball screws, tool holders, press tools, machine tools, lubricating oil supply devices for semi-dry processing, and ultra-precision measuring systems, among others. Its reportable segments are Drive Systems, Mold Systems, and Mechanical and Measurement Systems. Maximum revenue for the company is generated from its Mold Systems segment, which manufactures laminated precision press dies, precision metal press products, motor cores, etc. Geographically, a majority of its revenue is derived from its business in Japan, followed by China, the United States, Mexico, Europe, and other regions.
62GF Score
Get the complete analysis for TSE:7726
Gross Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TSE:7726 has been successfully added to your 
