Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Kuroda Precision IndustriesTSE:7726 -8.81%65 5-Year Yield-on-Cost % is 0.61 as of Aug. 13, 2026, which is 50% below its 10-year median of 1.21. GuruFocus rates TSE:7726 with a GF Score™ of 65/100 and a GF Value™ of 円1,285.37 (Fairly Valued). The stock has 9 warning signs investors should review. Among 1,899 Industrial Products companies, Kuroda Precision Industries ranks worse than 77.15% on this metric.
The historical rank and industry rank for Kuroda Precision Industries's 5-Year Yield-on-Cost % or its related term are showing as below:
TSE:7726'
s 5-Year Yield-on-Cost % Range Over the Past 10 Years
Min: 0.18 Med: 1.21 Max: 3.83
Current: 0.61
During the past 13 years, Kuroda Precision Industries's highest Yield on Cost was 3.83. The lowest was 0.18. And the median was 1.21.
TSE:7726's 5-Year Yield-on-Cost % is ranked worse than 77.15% of 1899
companies
in the Industrial Products industry
Industry Median: 1.89
vs TSE:7726: 0.61
Of course the risk here is that the company may not raise its dividends as it did before. The key is to select the companies that can consistently raise its dividends. Usually companies with long history of raising dividends tend to do so.
Kuroda Precision Industries 5-Year Yield-on-Cost % Related Terms
TSE:7726 vs SNA, RBC, SWK: 5-Year Yield-on-Cost % Comparison
For the Tools & Accessories subindustry, Kuroda Precision Industries's 5-Year Yield-on-Cost %, along with its competitors' market caps and 5-Year Yield-on-Cost % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Kuroda Precision Industries 5-Year Yield-on-Cost % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Kuroda Precision Industries's 5-Year Yield-on-Cost % distribution charts can be found below:
* The bar in red indicates where Kuroda Precision Industries's 5-Year Yield-on-Cost % falls into.
Dividend Yield % and dividend growth of a stock is an important factor for income investors. But if company A raises its dividend constantly faster than company B, company A's future dividend yield might be much higher than Company B's even if their yields are the same now and their stock prices do not change.
Yield on Cost assumes that you buy and the stock today, and hold it for 5 years. If the company raises it dividends at the same rate as it did over the past 5 years, the dividends investors receive annually in 5 years relative to the stock price today.
Kuroda Precision Industries (TSE:7726) has a 5-Year Yield-on-Cost % of 0.61 as of Aug. 13, 2026. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Kuroda Precision Industries and its competitors. This is 50% below median its historical median of 1.21. Over the past decade, Kuroda Precision Industries' 5-Year Yield-on-Cost % has ranged from 0.18 to 3.83. According to the industry distribution chart, Kuroda Precision Industries ranks #1465 out of 1899 companies in the Industrial Products industry, placing it in the top 77.1%.
Is Kuroda Precision Industries' 5-Year Yield-on-Cost % too high?
Kuroda Precision Industries' current 5-Year Yield-on-Cost % of 0.61 is 50% below median its 10-year median of 1.21. Over the past 10 years, this metric has ranged from a low of 0.18 to a high of 3.83. The Industrial Products industry median 5-Year Yield-on-Cost % is 1.89. Kuroda Precision Industries' value of 0.61 is 67.7% below this industry median. Based on the distribution chart, Kuroda Precision Industries ranks #1465 out of 1899 companies in the Industrial Products industry, which is in the bottom quartile relative to peers. Overall, Kuroda Precision Industries has a GF Score™ of 65/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Kuroda Precision Industries' 5-Year Yield-on-Cost % compare to SNA and RBC?
According to the Industrial Products industry distribution chart, Kuroda Precision Industries ranks #1465 out of 1899 companies for 5-Year Yield-on-Cost %. This places Kuroda Precision Industries in the lower half of its industry. The industry median 5-Year Yield-on-Cost % is 1.89. Kuroda Precision Industries' value of 0.61 is 67.7% below this benchmark. Historically, Kuroda Precision Industries' own 5-Year Yield-on-Cost % has ranged from 0.18 to 3.83 over the past decade. While the company's 10-year median is 1.21 vs. the industry median of 1.89, Kuroda Precision Industries has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good 5-Year Yield-on-Cost % for an Industrial Products company?
The median 5-Year Yield-on-Cost % among Industrial Products companies is 1.89, based on 1,899 companies in the industry. Companies in the top quartile (top 25%) have a 5-Year Yield-on-Cost % significantly above this median, while those in the bottom quartile fall well below. However, 5-Year Yield-on-Cost % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Kuroda Precision Industries's current 5-Year Yield-on-Cost % of 0.61 is 67.7% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high 5-Year Yield-on-Cost % mean?
A high 5-Year Yield-on-Cost % can signal that a stock is expensive relative to its fundamentals. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Kuroda Precision Industries and its competitors. For the Industrial Products industry, the median 5-Year Yield-on-Cost % is 1.89 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Kuroda Precision Industries's current 5-Year Yield-on-Cost % is 0.61, which is 50% below median its own 10-year median of 1.21. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Kuroda Precision Industries stock overvalued right now?
Based on GuruFocus' analysis, Kuroda Precision Industries (TSE:7726) is currently considered Fairly Valued. The stock's GF Value™ is 円1,285.37, compared to a current price of 円1,315.00 — trading 2.3% above its estimated fair value. The current 5-Year Yield-on-Cost % is 0.61, which is 50% below median its 10-year median of 1.21 and 67.7% below the Industrial Products industry median of 1.89. Kuroda Precision Industries' overall GF Score™ is 65/100 with 9 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is 5-Year Yield-on-Cost % calculated?
5-Year Yield-on-Cost % is calculated from a company's financial statements. For Kuroda Precision Industries (TSE:7726), the current 5-Year Yield-on-Cost % is 0.61 as of Aug. 13, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Kuroda Precision Industries (TSE:7726) Overvalued in 2026?
Based on GuruFocus' analysis, Kuroda Precision Industries stock appears to be overvalued.
The current stock price of 円1,315.00 is trading 2.3% above its estimated GF Value™ of 円1,285.37.
GuruFocus considers Kuroda Precision Industries to be Fairly Valued.
Key valuation signals for TSE:7726:
5-Year Yield-on-Cost %: 0.61 (50% below median its 10-year median of 1.21)
GF Value™: 円1,285.37 vs. price of 円1,315.00 (2.3% above fair value)
Industry Position: 67.7% below the Industrial Products median (#1465 of 1899)
No single metric tells the full story. See the TSE:7726 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Kuroda Precision Industries Ltd operates as a gauge manufacturer in Japan. The company's product includes gauges, ball screws, tool holders, press tools, machine tools, lubricating oil supply devices for semi-dry processing, and ultra-precision measuring systems, among others. Its reportable segments are Drive Systems, Mold Systems, and Mechanical and Measurement Systems. Maximum revenue for the company is generated from its Mold Systems segment, which manufactures laminated precision press dies, precision metal press products, motor cores, etc. Geographically, a majority of its revenue is derived from its business in Japan, followed by China, the United States, Mexico, Europe, and other regions.
65GF Score
Get the complete analysis for TSE:7726
5-Year Yield-on-Cost % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TSE:7726 has been successfully added to your 
