Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Chumpower MachineryROCO:4575 -1.09%76 Debt-to-Equity is 0.71 as of Jun. 2026, which is 9% below its 10-year median of 0.78. GuruFocus rates ROCO:4575 with a GF Score™ of 76/100 and a GF Value™ of NT$20.90 (Fairly Valued). The stock has 7 warning signs investors should review. Among 2,691 Industrial Products companies, Chumpower Machinery ranks worse than 77.03% on this metric.
A high debt to equity ratio generally means that a company has been aggressive in financing its growth with debt. This can result in volatile earnings as a result of the additional interest expense.
The historical rank and industry rank for Chumpower Machinery's Debt-to-Equity or its related term are showing as below:
ROCO:4575'
s Debt-to-Equity Range Over the Past 10 Years
Min: 0.5 Med: 0.78 Max: 1.56
Current: 0.71
During the past 12 years, the highest Debt-to-Equity Ratio of Chumpower Machinery was 1.56. The lowest was 0.50. And the median was 0.78.
ROCO:4575's Debt-to-Equity is ranked worse than 77.03% of 2691
companies
in the Industrial Products industry
Industry Median: 0.29
vs ROCO:4575: 0.71
Because a company can increase its ROE % by having more financial leverage, it is important to watch the leverage ratio when investing in high ROE % companies.
Chumpower Machinery Debt-to-Equity Related Terms
Chumpower Machinery Debt-to-Equity Historical Data
* Premium members only.
The historical data trend for Chumpower Machinery's Debt-to-Equity can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
ROCO:4575 vs GEV, ETN, PH: Debt-to-Equity Comparison
For the Specialty Industrial Machinery subindustry, Chumpower Machinery's Debt-to-Equity, along with its competitors' market caps and Debt-to-Equity data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Chumpower Machinery Debt-to-Equity vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Chumpower Machinery's Debt-to-Equity distribution charts can be found below:
* The bar in red indicates where Chumpower Machinery's Debt-to-Equity falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Chumpower Machinery (ROCO:4575) has a Debt-to-Equity of 0.71 as of Jun. 2026. Debt-to-Equity ratio represents the ratio of total debt to total company equity. View historical data on Chumpower Machinery and its competitors. This is near median its historical median of 0.78. Over the past decade, Chumpower Machinery's Debt-to-Equity has ranged from 0.50 to 1.56. According to the industry distribution chart, Chumpower Machinery ranks #2073 out of 2691 companies in the Industrial Products industry, placing it in the top 77%.
Is Chumpower Machinery's Debt-to-Equity too high?
Chumpower Machinery's current Debt-to-Equity of 0.71 is near median its 10-year median of 0.78. Over the past 10 years, this metric has ranged from a low of 0.50 to a high of 1.56. The Industrial Products industry median Debt-to-Equity is 0.29. Chumpower Machinery's value of 0.71 is 144.8% above this industry median. Based on the distribution chart, Chumpower Machinery ranks #2073 out of 2691 companies in the Industrial Products industry, which is in the bottom quartile relative to peers. Overall, Chumpower Machinery has a GF Score™ of 76/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Chumpower Machinery's Debt-to-Equity compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Chumpower Machinery ranks #2073 out of 2691 companies for Debt-to-Equity. This places Chumpower Machinery in the lower half of its industry. The industry median Debt-to-Equity is 0.29. Chumpower Machinery's value of 0.71 is 144.8% above this benchmark. Historically, Chumpower Machinery's own Debt-to-Equity has ranged from 0.50 to 1.56 over the past decade. While the company's 10-year median is 0.78 vs. the industry median of 0.29, Chumpower Machinery has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Debt-to-Equity for an Industrial Products company?
The median Debt-to-Equity among Industrial Products companies is 0.29, based on 2,691 companies in the industry. Companies in the top quartile (top 25%) have a Debt-to-Equity significantly above this median, while those in the bottom quartile fall well below. However, Debt-to-Equity should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Chumpower Machinery's current Debt-to-Equity of 0.71 is 144.8% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Debt-to-Equity mean?
A high Debt-to-Equity can signal that a stock is expensive relative to its fundamentals. Debt-to-Equity ratio represents the ratio of total debt to total company equity. View historical data on Chumpower Machinery and its competitors. For the Industrial Products industry, the median Debt-to-Equity is 0.29 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Chumpower Machinery's current Debt-to-Equity is 0.71, which is near median its own 10-year median of 0.78. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Chumpower Machinery stock overvalued right now?
Based on GuruFocus' analysis, Chumpower Machinery (ROCO:4575) is currently considered Fairly Valued. The stock's GF Value™ is NT$20.90, compared to a current price of NT$22.70 — trading 8.6% above its estimated fair value. The current Debt-to-Equity is 0.71, which is near median its 10-year median of 0.78 and 144.8% above the Industrial Products industry median of 0.29. Chumpower Machinery's overall GF Score™ is 76/100 with 7 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Debt-to-Equity calculated?
Debt-to-Equity is calculated from a company's financial statements. For Chumpower Machinery (ROCO:4575), the current Debt-to-Equity is 0.71 as of Jun. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Chumpower Machinery (ROCO:4575) Overvalued in 2026?
Based on GuruFocus' analysis, Chumpower Machinery stock appears to be overvalued.
The current stock price of NT$22.70 is trading 8.6% above its estimated GF Value™ of NT$20.90.
GuruFocus considers Chumpower Machinery to be Fairly Valued.
Key valuation signals for ROCO:4575:
Debt-to-Equity: 0.71 (near median its 10-year median of 0.78)
GF Value™: NT$20.90 vs. price of NT$22.70 (8.6% above fair value)
Industry Position: 144.8% above the Industrial Products median (#2073 of 2691)
No single metric tells the full story. See the ROCO:4575 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Chumpower Machinery Corp is a Taiwan based company mainly engaged in the production of polyethylene terephthalate (PET) blow molding machines. The company also offers molds for different shapes and size of the bottles. Machinery offered by the company include one stage series, L series, Phoenix series, and W/L series.
76GF Score
Get the complete analysis for ROCO:4575
Debt-to-Equity is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ROCO:4575 has been successfully added to your 
