Chumpower Machinery (ROCO:4575) Piotroski F-Score: 5 (As of Jul. 13, 2026) — 17% Below Median


ROCO:4575 Chumpower Machinery Corp ROCO:4575
73 GF Score
Price NT$24.90
GF Value NT$21.33
Valuation Modestly Overvalued
! 7 Warning Signs
View Full Analysis

What is Chumpower Machinery Piotroski F-Score?

Chumpower Machinery ROCO:4575 73 Piotroski F-Score is 5 as of Jul. 13, 2026, which is 17% below its 10-year median of 6.00. GuruFocus rates ROCO:4575 with a GF Score™ of 73/100 and a GF Value™ of NT$21.33 (Modestly Overvalued). The stock has 7 warning signs investors should review. Among 2,971 Industrial Products companies, Chumpower Machinery ranks better than 56.48% on this metric.

The zones of discrimination were as such:

Good or high score = 7, 8, 9
Bad or low score = 0, 1, 2, 3

Chumpower Machinery has an F-score of 5 indicating the company's financial situation is typical for a stable company.

The historical rank and industry rank for Chumpower Machinery's Piotroski F-Score or its related term are showing as below:

ROCO:4575' s Piotroski F-Score Range Over the Past 10 Years
Min: 2   Med: 6   Max: 8
Current: 5

During the past 12 years, the highest Piotroski F-Score of Chumpower Machinery was 8. The lowest was 2. And the median was 6.

Chumpower Machinery  (ROCO:4575) Piotroski F-Score Explanation

The developer of the system is Joseph D. Piotroski is relatively unknown accounting professor who shuns publicity and rarely gives interviews.

He graduated from the University of Illinois with a B.S. in accounting in 1989, received an M.B.A. from Indiana University in 1994. Five years later, in 1999, after earning a Ph.D. in accounting from the University of Michigan, he became an associate professor of accounting at the University of Chicago.

In 2000, he wrote a research paper called "Value Investing: The Use of Historical Financial Statement Information to Separate Winners from Losers" (pdf).

He wanted to see if he can develop a system (using a simple nine-point scoring system) that can increase the returns of a strategy of investing in low price to book (referred to in the paper as high book to market) value companies.

What he found was something that exceeded his most optimistic expectations.

Buying only those companies that scored highest (8 or 9) on his nine-point scale, or F-Score as he called it, over the 20 year period from 1976 to 1996 led to an average out-performance over the market of 13.4%.

Even more impressive were the results of a strategy of investing in the highest F-Score companies (8 or 9) and shorting companies with the lowest F-Score (0 or 1).

Over the same period from 1976 to 1996 (20 years) this strategy led to an average yearly return of 23%, substantially outperforming the average S&P 500 index return of 15.83% over the same period.


Chumpower Machinery Piotroski F-Score Related Terms


Chumpower Machinery Piotroski F-Score Historical Data

* Premium members only.

The historical data trend for Chumpower Machinery's Piotroski F-Score can be seen below:

* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD.
* For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.

Chumpower Machinery Piotroski F-Score Chart

Chumpower Machinery Annual Data
Trend Dec16 Dec17 Dec18 Dec19 Dec20 Dec21 Dec22 Dec23 Dec24 Dec25
Piotroski F-Score
Get a 7-Day Free Trial Premium Member Only Premium Member Only 3.00 8.00 8.00 8.00 5.00

Chumpower Machinery Semi-Annual Data
Dec15 Dec16 Jun17 Dec17 Jun18 Dec18 Jun19 Dec19 Jun20 Dec20 Jun21 Dec21 Jun22 Dec22 Jun23 Dec23 Jun24 Dec24 Jun25 Dec25
Piotroski F-Score Get a 7-Day Free Trial Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only 8.00 0.00 8.00 0.00 5.00

ROCO:4575 vs GEV, ETN, PH: Piotroski F-Score Comparison

For the Specialty Industrial Machinery subindustry, Chumpower Machinery's Piotroski F-Score, along with its competitors' market caps and Piotroski F-Score data, can be viewed below:

* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.


Chumpower Machinery Piotroski F-Score vs Industrial Products Industry

For the Industrial Products industry and Industrials sector, Chumpower Machinery's Piotroski F-Score distribution charts can be found below:

* The bar in red indicates where Chumpower Machinery's Piotroski F-Score falls into.


ROCO:4575
73GF Score
Chumpower Machinery Corp ROCO:4575
Piotroski F-Score is just one metric. See GF Score™, valuation, warning signs, and more.
View Full Analysis

How is the Piotroski F-Score calculated?

* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD.
* For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.

This Year (Dec25) TTM:Last Year (Dec24) TTM:
Net Income was NT$42.1 Mil.
Cash Flow from Operations was NT$9.3 Mil.
Revenue was NT$968.2 Mil.
Gross Profit was NT$256.7 Mil.
Average Total Assets from the begining of this year (Dec24)
to the end of this year (Dec25) was (2547.045 + 2452.013) / 2 = NT$2499.529 Mil.
Total Assets at the begining of this year (Dec24) was NT$2,547.0 Mil.
Long-Term Debt & Capital Lease Obligation was NT$209.8 Mil.
Total Current Assets was NT$979.9 Mil.
Total Current Liabilities was NT$988.8 Mil.
Net Income was NT$78.2 Mil.

Revenue was NT$993.1 Mil.
Gross Profit was NT$269.4 Mil.
Average Total Assets from the begining of last year (Dec23)
to the end of last year (Dec24) was (2639.783 + 2547.045) / 2 = NT$2593.414 Mil.
Total Assets at the begining of last year (Dec23) was NT$2,639.8 Mil.
Long-Term Debt & Capital Lease Obligation was NT$314.5 Mil.
Total Current Assets was NT$1,059.8 Mil.
Total Current Liabilities was NT$948.4 Mil.

*Note: If the latest quarterly/semi-annual/annual total assets data is 0, then we will use previous quarterly/semi-annual/annual data for all the items in the balance sheet.

Profitability

Question 1. Return on Assets (ROA)

Net income before extraordinary items for the year divided by Total Assets at the beginning of the year.

Score 1 if positive, 0 if negative.

Chumpower Machinery's current Net Income (TTM) was 42.1. ==> Positive ==> Score 1.

Question 2. Cash Flow Return on Assets (CFROA)

Net cash flow from operating activities (operating cash flow) divided by Total Assets at the beginning of the year.

Score 1 if positive, 0 if negative.

Chumpower Machinery's current Cash Flow from Operations (TTM) was 9.3. ==> Positive ==> Score 1.

Question 3. Change in Return on Assets

Compare this year's return on assets (1) to last year's return on assets.

Score 1 if it's higher, 0 if it's lower.

ROA (This Year)=Net Income/Total Assets (Dec24)
=42.053/2547.045
=0.01651051

ROA (Last Year)=Net Income/Total Assets (Dec23)
=78.221/2639.783
=0.0296316

Chumpower Machinery's return on assets of this year was 0.01651051. Chumpower Machinery's return on assets of last year was 0.0296316. ==> Last year is higher ==> Score 0.

Question 4. Quality of Earnings (Accrual)

Compare Cash flow return on assets (2) to return on assets (1)

Score 1 if CFROA > ROA, 0 if CFROA <= ROA.

Chumpower Machinery's current Net Income (TTM) was 42.1. Chumpower Machinery's current Cash Flow from Operations (TTM) was 9.3. ==> 9.3 <= 42.1 ==> CFROA <= ROA ==> Score 0.

Funding

Question 5. Change in Gearing or Leverage

Compare this year's gearing (long-term debt divided by average total assets) to last year's gearing.

Score 0 if this year's gearing is higher, 1 otherwise.

Gearing (This Year: Dec25)=Long-Term Debt & Capital Lease Obligation/Average Total Assets from Dec24 to Dec25
=209.834/2499.529
=0.08394942

Gearing (Last Year: Dec24)=Long-Term Debt & Capital Lease Obligation/Average Total Assets from Dec23 to Dec24
=314.532/2593.414
=0.12128106

Chumpower Machinery's gearing of this year was 0.08394942. Chumpower Machinery's gearing of last year was 0.12128106. ==> This year is lower or equal to last year. ==> Score 1.

Question 6. Change in Working Capital (Liquidity)

Compare this year's current ratio (current assets divided by current liabilities) to last year's current ratio.

Score 1 if this year's current ratio is higher, 0 if it's lower

Current Ratio (This Year: Dec25)=Total Current Assets/Total Current Liabilities
=979.875/988.847
=0.99092681

Current Ratio (Last Year: Dec24)=Total Current Assets/Total Current Liabilities
=1059.833/948.414
=1.11747929

Chumpower Machinery's current ratio of this year was 0.99092681. Chumpower Machinery's current ratio of last year was 1.11747929. ==> Last year's current ratio is higher ==> Score 0.

Question 7. Change in Shares in Issue

Compare the number of shares in issue this year, to the number in issue last year.

Score 0 if there is larger number of shares in issue this year, 1 otherwise.

Chumpower Machinery's number of shares in issue this year was 38.939. Chumpower Machinery's number of shares in issue last year was 39.085. ==> There is smaller number of shares in issue this year, or the same. ==> Score 1.

Efficiency

Question 8. Change in Gross Margin

Compare this year's gross margin (Gross Profit divided by sales) to last year's.

Score 1 if this year's gross margin is higher, 0 if it's lower.

Gross Margin (This Year: TTM)=Gross Profit/Revenue
=256.742/968.196
=0.26517565

Gross Margin (Last Year: TTM)=Gross Profit/Revenue
=269.42/993.101
=0.27129164

Chumpower Machinery's gross margin of this year was 0.26517565. Chumpower Machinery's gross margin of last year was 0.27129164. ==> Last year's gross margin is higher ==> Score 0.

Question 9. Change in asset turnover

Compare this year's asset turnover (total sales for the year divided by total assets at the beginning of the year) to last year's asset turnover ratio.

Score 1 if this year's asset turnover ratio is higher, 0 if it's lower

Asset Turnover (This Year)=Revenue/Total Assets at the Beginning of This Year (Dec24)
=968.196/2547.045
=0.3801252

Asset Turnover (Last Year)=Revenue/Total Assets at the Beginning of Last Year (Dec23)
=993.101/2639.783
=0.37620554

Chumpower Machinery's asset turnover of this year was 0.3801252. Chumpower Machinery's asset turnover of last year was 0.37620554. ==> This year's asset turnover is higher. ==> Score 1.

Evaluation

Piotroski F-Score= Que. 1+ Que. 2+ Que. 3+Que. 4+Que. 5+Que. 6+Que. 7+Que. 8+Que. 9
=1+1+0+0+1+0+1+0+1
=5

Good or high score = 7, 8, 9
Bad or low score = 0, 1, 2, 3

Chumpower Machinery has an F-score of 5 indicating the company's financial situation is typical for a stable company.

Frequently Asked Questions Learn more about Piotroski F-Score →
What does a Piotroski F-Score of 5 mean?
Chumpower Machinery (ROCO:4575) has a Piotroski F-Score of 5 as of Jul. 13, 2026. The Piotroski F-score grades a company's business operating strength from 0-9. View historical data on Chumpower Machinery and its competitors. This is 17% below median its historical median of 6.00. Over the past decade, Chumpower Machinery's Piotroski F-Score has ranged from 2.00 to 8.00. According to the industry distribution chart, Chumpower Machinery ranks #1293 out of 2971 companies in the Industrial Products industry, placing it in the top 43.5%.
Is Chumpower Machinery's Piotroski F-Score too high?
Chumpower Machinery's current Piotroski F-Score of 5 is 17% below median its 10-year median of 6.00. Over the past 10 years, this metric has ranged from a low of 2.00 to a high of 8.00. The Industrial Products industry median Piotroski F-Score is 5.00. Chumpower Machinery's value of 5 is 0% at this industry median. Based on the distribution chart, Chumpower Machinery ranks #1293 out of 2971 companies in the Industrial Products industry, which is above the industry midpoint. Overall, Chumpower Machinery has a GF Score™ of 73/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Chumpower Machinery's Piotroski F-Score compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Chumpower Machinery ranks #1293 out of 2971 companies for Piotroski F-Score. This puts Chumpower Machinery in the upper half of its industry. The industry median Piotroski F-Score is 5.00. Chumpower Machinery's value of 5 is 0% at this benchmark. Historically, Chumpower Machinery's own Piotroski F-Score has ranged from 2.00 to 8.00 over the past decade. While the company's 10-year median is 6.00 vs. the industry median of 5.00, Chumpower Machinery has consistently been at the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Piotroski F-Score for an Industrial Products company?
The median Piotroski F-Score among Industrial Products companies is 5.00, based on 2,971 companies in the industry. Companies in the top quartile (top 25%) have a Piotroski F-Score significantly above this median, while those in the bottom quartile fall well below. However, Piotroski F-Score should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Chumpower Machinery's current Piotroski F-Score of 5 is 0% at the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Piotroski F-Score mean?
A high Piotroski F-Score can signal that a stock is expensive relative to its fundamentals. The Piotroski F-score grades a company's business operating strength from 0-9. View historical data on Chumpower Machinery and its competitors. For the Industrial Products industry, the median Piotroski F-Score is 5.00 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Chumpower Machinery's current Piotroski F-Score is 5, which is 17% below median its own 10-year median of 6.00. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Chumpower Machinery stock overvalued right now?
Based on GuruFocus' analysis, Chumpower Machinery (ROCO:4575) is currently considered Modestly Overvalued. The stock's GF Value™ is NT$21.33, compared to a current price of NT$24.90 — trading 16.7% above its estimated fair value. The current Piotroski F-Score is 5, which is 17% below median its 10-year median of 6.00 and 0% at the Industrial Products industry median of 5.00. Chumpower Machinery's overall GF Score™ is 73/100 with 7 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Piotroski F-Score calculated?
Piotroski F-Score is calculated from a company's financial statements. For Chumpower Machinery (ROCO:4575), the current Piotroski F-Score is 5 as of Jul. 13, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.

Is Chumpower Machinery (ROCO:4575) Overvalued in 2026?

Based on GuruFocus' analysis, Chumpower Machinery stock appears to be overvalued. The current stock price of NT$24.90 is trading 16.7% above its estimated GF Value™ of NT$21.33. GuruFocus considers Chumpower Machinery to be Modestly Overvalued.

Key valuation signals for ROCO:4575:

  • Piotroski F-Score: 5 (17% below median its 10-year median of 6.00)
  • GF Value™: NT$21.33 vs. price of NT$24.90 (16.7% above fair value)
  • GF Score™: 73/100 with 7 warning signs
  • Industry Position: 0% at the Industrial Products median (#1293 of 2971)

No single metric tells the full story. See the ROCO:4575 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.


Chumpower Machinery Business Description

Address No.688-1, Section 3, Zhongshan Road, Rongquan Lane, Wuri District, Taichung, TWN, 414
Chumpower Machinery Corp is a Taiwan based company mainly engaged in the production of polyethylene terephthalate (PET) blow molding machines. The company also offers molds for different shapes and size of the bottles. Machinery offered by the company include one stage series, L series, Phoenix series, and W/L series.
73GF Score

Get the complete analysis for ROCO:4575

Piotroski F-Score is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.

NT$24.90
Price
NT$21.33
GF Value