Chumpower MachineryROCO:4575 73 Operating Margin % is 2.89% as of Dec. 2025, which is 6% below its 10-year median of 3.08. GuruFocus rates ROCO:4575 with a GF Score™ of 73/100 and a GF Value™ of NT$21.33 (Modestly Overvalued). The stock has 7 warning signs investors should review. Among 3,032 Industrial Products companies, Chumpower Machinery ranks worse than 73.19% on this metric.
The historical rank and industry rank for Chumpower Machinery's Operating Margin % or its related term are showing as below:
ROCO:4575'
s Operating Margin % Range Over the Past 10 Years
Min: -5.67 Med: 3.08 Max: 11.93
Current: 1.32
ROCO:4575's Operating Margin % is ranked worse than 73.19% of 3032
companies
in the Industrial Products industry
Industry Median: 6.505
vs ROCO:4575: 1.32
Chumpower Machinery's 5-Year Average Operating Margin % Growth Rate was 0.00% per year.
Just like Gross Margin %, it is important to see a company maintains its operating margin over time. Among the same industry, a company with higher operating margin is more efficient in its operation. It is also more stable during industry slowdown or recessions. Peter Lynch prefers those with higher margins than those with lower margins.
Be Aware
Operating Margin % can be manipulated by adjusting the rate of depreciation, depletion and amortization (DDA).
If a company is facing competition, its Operating Margin % may decline. Often the Operating Margin % declines well before the company's Revenue or even profit decline. Therefore, Operating Margin % is a very important indicator of whether the company is facing problems.
For instance, by 2012, Nokia (NOK)'s problems were well known and its stock had lost more than 90% of its market value since 2007. But Nokias Operating Margin % had already been in decline since 2002, although its Earnings per Share (Diluted) were still rising. Investors who paid attention to Operating Margin % would have avoided this huge loss. The same can be said for Research-in-Motion (RIMM).
Therefore, Operating Margin % is a very important screening filter for GuruFocus. GuruFocus's Buffett-Munger screener requires that the profit margin is either consistent or expanding. The Model Portfolio of the Buffett-Munger screener has outperformed the market every year since inception in 2009.
Chumpower Machinery Operating Margin % Related Terms
Chumpower Machinery Operating Margin % Historical Data
* Premium members only.
The historical data trend for Chumpower Machinery's Operating Margin % can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
ROCO:4575 vs GEV, ETN, PH: Operating Margin % Comparison
For the Specialty Industrial Machinery subindustry, Chumpower Machinery's Operating Margin %, along with its competitors' market caps and Operating Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Chumpower Machinery Operating Margin % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Chumpower Machinery's Operating Margin % distribution charts can be found below:
* The bar in red indicates where Chumpower Machinery's Operating Margin % falls into.
Operating Margin % - also known as operating income margin, operating profit margin and return on sales (ROS) - is the ratio of Operating Income divided by net sales or Revenue, usually presented in percent.
Chumpower Machinery's Operating Margin % for the fiscal year that ended in Dec. 2025 is calculated as
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Chumpower Machinery (ROCO:4575) has a Operating Margin % of 2.89% as of Dec. 2025. Operating margin is the ratio of total operating income to net sales. View historical data on Chumpower Machinery and its competitors. This is near median its historical median of 3.08. According to the industry distribution chart, Chumpower Machinery ranks #2219 out of 3032 companies in the Industrial Products industry, placing it in the top 73.2%.
Is Chumpower Machinery's Operating Margin % too high?
Chumpower Machinery's current Operating Margin % of 2.89% is near median its 10-year median of 3.08. The Industrial Products industry median Operating Margin % is 6.51. Chumpower Machinery's value of 2.89% is 55.6% below this industry median. Based on the distribution chart, Chumpower Machinery ranks #2219 out of 3032 companies in the Industrial Products industry, which is below the industry midpoint. Overall, Chumpower Machinery has a GF Score™ of 73/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Chumpower Machinery's Operating Margin % compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Chumpower Machinery ranks #2219 out of 3032 companies for Operating Margin %. This places Chumpower Machinery in the lower half of its industry. The industry median Operating Margin % is 6.51. Chumpower Machinery's value of 2.89% is 55.6% below this benchmark. While the company's 10-year median is 3.08 vs. the industry median of 6.51, Chumpower Machinery has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Operating Margin % for an Industrial Products company?
The median Operating Margin % among Industrial Products companies is 6.51, based on 3,032 companies in the industry. Companies in the top quartile (top 25%) have a Operating Margin % significantly above this median, while those in the bottom quartile fall well below. However, Operating Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Chumpower Machinery's current Operating Margin % of 2.89% is 55.6% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Operating Margin % mean?
A high Operating Margin % can signal that a stock is expensive relative to its fundamentals. Operating margin is the ratio of total operating income to net sales. View historical data on Chumpower Machinery and its competitors. For the Industrial Products industry, the median Operating Margin % is 6.51 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Chumpower Machinery's current Operating Margin % is 2.89%, which is near median its own 10-year median of 3.08. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Chumpower Machinery stock overvalued right now?
Based on GuruFocus' analysis, Chumpower Machinery (ROCO:4575) is currently considered Modestly Overvalued. The stock's GF Value™ is NT$21.33, compared to a current price of NT$24.90 — trading 16.7% above its estimated fair value. The current Operating Margin % is 2.89%, which is near median its 10-year median of 3.08 and 55.6% below the Industrial Products industry median of 6.51. Chumpower Machinery's overall GF Score™ is 73/100 with 7 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Operating Margin % calculated?
Operating Margin % is calculated from a company's financial statements. For Chumpower Machinery (ROCO:4575), the current Operating Margin % is 2.89% as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Chumpower Machinery (ROCO:4575) Overvalued in 2026?
Based on GuruFocus' analysis, Chumpower Machinery stock appears to be overvalued.
The current stock price of NT$24.90 is trading 16.7% above its estimated GF Value™ of NT$21.33.
GuruFocus considers Chumpower Machinery to be Modestly Overvalued.
Key valuation signals for ROCO:4575:
Operating Margin %: 2.89% (near median its 10-year median of 3.08)
GF Value™: NT$21.33 vs. price of NT$24.90 (16.7% above fair value)
Industry Position: 55.6% below the Industrial Products median (#2219 of 3032)
No single metric tells the full story. See the ROCO:4575 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Chumpower Machinery Corp is a Taiwan based company mainly engaged in the production of polyethylene terephthalate (PET) blow molding machines. The company also offers molds for different shapes and size of the bottles. Machinery offered by the company include one stage series, L series, Phoenix series, and W/L series.
73GF Score
Get the complete analysis for ROCO:4575
Operating Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ROCO:4575 has been successfully added to your 
