Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Asia Metal PCLBKK:AMC +0.97%68 EBITDA Margin % is 4.36% as of Mar. 2026, which is 24% below its 10-year median of 5.76. GuruFocus rates BKK:AMC with a GF Score™ of 68/100 and a GF Value™ of ฿2.18 (Fairly Valued). The stock has 8 warning signs investors should review. Among 611 Steel companies, Asia Metal PCL ranks worse than 73.65% on this metric.
EBITDA Margin % is calculated as EBITDA divided by its Revenue. Asia Metal PCL's EBITDA for the
three
months ended in Mar. 2026 was ฿66 Mil. Asia Metal PCL's Revenue for the
three
months ended in Mar. 2026 was ฿1,514 Mil. Therefore, Asia Metal PCL's EBITDA margin for the quarter that ended in Mar. 2026 was 4.36%.
Asia Metal PCL (BKK:AMC) EBITDA Margin % Explanation
EBITDA Margin % is the ratio of EBITDA divided by net sales or Revenue. It is an performance metric measuring company's operating profitability. EBITDA Margin takes depreciation and amortization, interest expense and tax into account, which makes it easy to compare the relative profitability of companies of different sizes in the same industry.
Asia Metal PCL EBITDA Margin % Related Terms
Asia Metal PCL EBITDA Margin % Historical Data
* Premium members only.
The historical data trend for Asia Metal PCL's EBITDA Margin % can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
BKK:AMC vs NUE, STLD, RS: EBITDA Margin % Comparison
For the Steel subindustry, Asia Metal PCL's EBITDA Margin %, along with its competitors' market caps and EBITDA Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Asia Metal PCL EBITDA Margin % vs Steel Industry
For the Steel industry and Basic Materials sector, Asia Metal PCL's EBITDA Margin % distribution charts can be found below:
* The bar in red indicates where Asia Metal PCL's EBITDA Margin % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Asia Metal PCL (BKK:AMC) has a EBITDA Margin % of 4.36% as of Mar. 2026. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Asia Metal PCL and its competitors. This is 24% below median its historical median of 5.76. Over the past decade, Asia Metal PCL's EBITDA Margin % has ranged from 0.74 to 16.30. According to the industry distribution chart, Asia Metal PCL ranks #450 out of 611 companies in the Steel industry, placing it in the top 73.6%.
Is Asia Metal PCL's EBITDA Margin % too high?
Asia Metal PCL's current EBITDA Margin % of 4.36% is 24% below median its 10-year median of 5.76. Over the past 10 years, this metric has ranged from a low of 0.74 to a high of 16.30. The Steel industry median EBITDA Margin % is 6.29. Asia Metal PCL's value of 4.36% is 30.7% below this industry median. Based on the distribution chart, Asia Metal PCL ranks #450 out of 611 companies in the Steel industry, which is below the industry midpoint. Overall, Asia Metal PCL has a GF Score™ of 68/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Asia Metal PCL's EBITDA Margin % compare to NUE and STLD?
According to the Steel industry distribution chart, Asia Metal PCL ranks #450 out of 611 companies for EBITDA Margin %. This places Asia Metal PCL in the lower half of its industry. The industry median EBITDA Margin % is 6.29. Asia Metal PCL's value of 4.36% is 30.7% below this benchmark. Historically, Asia Metal PCL's own EBITDA Margin % has ranged from 0.74 to 16.30 over the past decade. While the company's 10-year median is 5.76 vs. the industry median of 6.29, Asia Metal PCL has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EBITDA Margin % for a Steel company?
The median EBITDA Margin % among Steel companies is 6.29, based on 611 companies in the industry. Companies in the top quartile (top 25%) have a EBITDA Margin % significantly above this median, while those in the bottom quartile fall well below. However, EBITDA Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Asia Metal PCL's current EBITDA Margin % of 4.36% is 30.7% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EBITDA Margin % mean?
A high EBITDA Margin % can signal that a stock is expensive relative to its fundamentals. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Asia Metal PCL and its competitors. For the Steel industry, the median EBITDA Margin % is 6.29 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Asia Metal PCL's current EBITDA Margin % is 4.36%, which is 24% below median its own 10-year median of 5.76. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Asia Metal PCL stock overvalued right now?
Based on GuruFocus' analysis, Asia Metal PCL (BKK:AMC) is currently considered Fairly Valued. The stock's GF Value™ is ฿2.18, compared to a current price of ฿2.08 — trading 4.6% below its estimated fair value. The current EBITDA Margin % is 4.36%, which is 24% below median its 10-year median of 5.76 and 30.7% below the Steel industry median of 6.29. Asia Metal PCL's overall GF Score™ is 68/100 with 8 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EBITDA Margin % calculated?
EBITDA Margin % is calculated from a company's financial statements. For Asia Metal PCL (BKK:AMC), the current EBITDA Margin % is 4.36% as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Asia Metal PCL (BKK:AMC) Overvalued in 2026?
Based on GuruFocus' analysis, Asia Metal PCL stock appears to be undervalued.
The current stock price of ฿2.08 is trading 4.6% below its estimated GF Value™ of ฿2.18.
GuruFocus considers Asia Metal PCL to be Fairly Valued.
Key valuation signals for BKK:AMC:
EBITDA Margin %: 4.36% (24% below median its 10-year median of 5.76)
GF Value™: ฿2.18 vs. price of ฿2.08 (4.6% below fair value)
Industry Position: 30.7% below the Steel median (#450 of 611)
No single metric tells the full story. See the BKK:AMC stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Asia Metal PCL is engaged in manufacturing and trading processed steel products and rendering service for the manufacturing of processed steel. Its products include integrated steel roll coiled, both hot-rolled and cold-rolled type, the cut-and-steel sheet, and rolling a Little (slitting coil). The company also manufactures and distributes steel pipe and structural steel C-shape used by various industries. Its segment is the manufacturing and trading of processed steel products and rendering service for cutting and modifying steels. It has only one geographical segment because it operates only in Thailand.
68GF Score
Get the complete analysis for BKK:AMC
EBITDA Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BKK:AMC has been successfully added to your 
