Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Asia Metal PCLBKK:AMC +2.44%63 5-Year Yield-on-Cost % is 3.23 as of Aug. 29, 2026, which is 44% below its 10-year median of 5.79. GuruFocus rates BKK:AMC with a GF Score™ of 63/100 and a GF Value™ of ฿1.84 (Significantly Overvalued). The stock has 10 warning signs investors should review. Among 314 Steel companies, Asia Metal PCL ranks worse than 50.64% on this metric.
Asia Metal PCL's yield on cost for the quarter that ended in Jun. 2026 was 3.23.
The historical rank and industry rank for Asia Metal PCL's 5-Year Yield-on-Cost % or its related term are showing as below:
BKK:AMC'
s 5-Year Yield-on-Cost % Range Over the Past 10 Years
Min: 1.76 Med: 5.79 Max: 12.14
Current: 3.23
During the past 13 years, Asia Metal PCL's highest Yield on Cost was 12.14. The lowest was 1.76. And the median was 5.79.
BKK:AMC's 5-Year Yield-on-Cost % is ranked worse than 50.64% of 314
companies
in the Steel industry
Industry Median: 3.34
vs BKK:AMC: 3.23
Asia Metal PCL (BKK:AMC) 5-Year Yield-on-Cost % Explanation
Of course the risk here is that the company may not raise its dividends as it did before. The key is to select the companies that can consistently raise its dividends. Usually companies with long history of raising dividends tend to do so.
Asia Metal PCL 5-Year Yield-on-Cost % Related Terms
BKK:AMC vs NUE, STLD, RS: 5-Year Yield-on-Cost % Comparison
For the Steel subindustry, Asia Metal PCL's 5-Year Yield-on-Cost %, along with its competitors' market caps and 5-Year Yield-on-Cost % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Asia Metal PCL 5-Year Yield-on-Cost % vs Steel Industry
For the Steel industry and Basic Materials sector, Asia Metal PCL's 5-Year Yield-on-Cost % distribution charts can be found below:
* The bar in red indicates where Asia Metal PCL's 5-Year Yield-on-Cost % falls into.
Dividend Yield % and dividend growth of a stock is an important factor for income investors. But if company A raises its dividend constantly faster than company B, company A's future dividend yield might be much higher than Company B's even if their yields are the same now and their stock prices do not change.
Yield on Cost assumes that you buy and the stock today, and hold it for 5 years. If the company raises it dividends at the same rate as it did over the past 5 years, the dividends investors receive annually in 5 years relative to the stock price today.
Therefore, Yield-on-Cost of Asia Metal PCL is calculated as
Asia Metal PCL (BKK:AMC) has a 5-Year Yield-on-Cost % of 3.23 as of Aug. 29, 2026. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Asia Metal PCL and its competitors. This is 44% below median its historical median of 5.79. Over the past decade, Asia Metal PCL's 5-Year Yield-on-Cost % has ranged from 1.76 to 12.14. According to the industry distribution chart, Asia Metal PCL ranks #159 out of 314 companies in the Steel industry, placing it in the top 50.6%.
Is Asia Metal PCL's 5-Year Yield-on-Cost % too high?
Asia Metal PCL's current 5-Year Yield-on-Cost % of 3.23 is 44% below median its 10-year median of 5.79. Over the past 10 years, this metric has ranged from a low of 1.76 to a high of 12.14. The Steel industry median 5-Year Yield-on-Cost % is 3.34. Asia Metal PCL's value of 3.23 is 3.3% below this industry median. Based on the distribution chart, Asia Metal PCL ranks #159 out of 314 companies in the Steel industry, which is below the industry midpoint. Overall, Asia Metal PCL has a GF Score™ of 63/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Asia Metal PCL's 5-Year Yield-on-Cost % compare to NUE and STLD?
According to the Steel industry distribution chart, Asia Metal PCL ranks #159 out of 314 companies for 5-Year Yield-on-Cost %. This places Asia Metal PCL in the lower half of its industry. The industry median 5-Year Yield-on-Cost % is 3.34. Asia Metal PCL's value of 3.23 is 3.3% below this benchmark. Historically, Asia Metal PCL's own 5-Year Yield-on-Cost % has ranged from 1.76 to 12.14 over the past decade. While the company's 10-year median is 5.79 vs. the industry median of 3.34, Asia Metal PCL has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good 5-Year Yield-on-Cost % for a Steel company?
The median 5-Year Yield-on-Cost % among Steel companies is 3.34, based on 314 companies in the industry. Companies in the top quartile (top 25%) have a 5-Year Yield-on-Cost % significantly above this median, while those in the bottom quartile fall well below. However, 5-Year Yield-on-Cost % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Asia Metal PCL's current 5-Year Yield-on-Cost % of 3.23 is 3.3% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high 5-Year Yield-on-Cost % mean?
A high 5-Year Yield-on-Cost % can signal that a stock is expensive relative to its fundamentals. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Asia Metal PCL and its competitors. For the Steel industry, the median 5-Year Yield-on-Cost % is 3.34 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Asia Metal PCL's current 5-Year Yield-on-Cost % is 3.23, which is 44% below median its own 10-year median of 5.79. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Asia Metal PCL stock overvalued right now?
Based on GuruFocus' analysis, Asia Metal PCL (BKK:AMC) is currently considered Significantly Overvalued. The stock's GF Value™ is ฿1.84, compared to a current price of ฿2.52 — trading 37% above its estimated fair value. The current 5-Year Yield-on-Cost % is 3.23, which is 44% below median its 10-year median of 5.79 and 3.3% below the Steel industry median of 3.34. Asia Metal PCL's overall GF Score™ is 63/100 with 10 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is 5-Year Yield-on-Cost % calculated?
5-Year Yield-on-Cost % is calculated from a company's financial statements. For Asia Metal PCL (BKK:AMC), the current 5-Year Yield-on-Cost % is 3.23 as of Aug. 29, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Asia Metal PCL (BKK:AMC) Overvalued in 2026?
Based on GuruFocus' analysis, Asia Metal PCL stock appears to be overvalued.
The current stock price of ฿2.52 is trading 37% above its estimated GF Value™ of ฿1.84.
GuruFocus considers Asia Metal PCL to be Significantly Overvalued.
Key valuation signals for BKK:AMC:
5-Year Yield-on-Cost %: 3.23 (44% below median its 10-year median of 5.79)
GF Value™: ฿1.84 vs. price of ฿2.52 (37% above fair value)
Industry Position: 3.3% below the Steel median (#159 of 314)
No single metric tells the full story. See the BKK:AMC stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Asia Metal PCL is engaged in manufacturing and trading processed steel products and rendering service for the manufacturing of processed steel. Its products include integrated steel roll coiled, both hot-rolled and cold-rolled type, the cut-and-steel sheet, and rolling a Little (slitting coil). The company also manufactures and distributes steel pipe and structural steel C-shape used by various industries. Its segment is the manufacturing and trading of processed steel products and rendering service for cutting and modifying steels. It has only one geographical segment because it operates only in Thailand.
63GF Score
Get the complete analysis for BKK:AMC
5-Year Yield-on-Cost % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BKK:AMC has been successfully added to your 
