Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Sanko Diecasting (Thailand) PCLBKK:SANKO +3.88%76 EBITDA Margin % is 18.20% as of Mar. 2026, which is 99% above its 10-year median of 9.15. GuruFocus rates BKK:SANKO with a GF Score™ of 76/100 and a GF Value™ of ฿1.08 (Modestly Overvalued). The stock has 3 warning signs investors should review. Among 1,320 Vehicles & Parts companies, Sanko Diecasting (Thailand) PCL ranks better than 79.62% on this metric.
EBITDA Margin % is the ratio of EBITDA divided by net sales or Revenue. It is an performance metric measuring company's operating profitability. EBITDA Margin takes depreciation and amortization, interest expense and tax into account, which makes it easy to compare the relative profitability of companies of different sizes in the same industry.
Sanko Diecasting (Thailand) PCL EBITDA Margin % Related Terms
Sanko Diecasting (Thailand) PCL EBITDA Margin % Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
BKK:SANKO vs ORLY, AZO: EBITDA Margin % Comparison
For the Auto Parts subindustry, Sanko Diecasting (Thailand) PCL's EBITDA Margin %, along with its competitors' market caps and EBITDA Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Sanko Diecasting (Thailand) PCL EBITDA Margin % vs Vehicles & Parts Industry
For the Vehicles & Parts industry and Consumer Cyclical sector, Sanko Diecasting (Thailand) PCL's EBITDA Margin % distribution charts can be found below:
* The bar in red indicates where Sanko Diecasting (Thailand) PCL's EBITDA Margin % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Sanko Diecasting (Thailand) PCL (BKK:SANKO) has a EBITDA Margin % of 18.20% as of Mar. 2026. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Sanko Diecasting (Thailand) PCL and its competitors. This is 99% above median its historical median of 9.15. Over the past decade, Sanko Diecasting (Thailand) PCL's EBITDA Margin % has ranged from 0.53 to 16.04. According to the industry distribution chart, Sanko Diecasting (Thailand) PCL ranks #269 out of 1320 companies in the Vehicles & Parts industry, placing it in the top 20.4%.
Is Sanko Diecasting (Thailand) PCL's EBITDA Margin % too high?
Sanko Diecasting (Thailand) PCL's current EBITDA Margin % of 18.20% is 99% above median its 10-year median of 9.15. Over the past 10 years, this metric has ranged from a low of 0.53 to a high of 16.04. The Vehicles & Parts industry median EBITDA Margin % is 9.07. Sanko Diecasting (Thailand) PCL's value of 18.20% is 100.7% above this industry median. Based on the distribution chart, Sanko Diecasting (Thailand) PCL ranks #269 out of 1320 companies in the Vehicles & Parts industry, which is in the top quartile — a strong position relative to peers. Overall, Sanko Diecasting (Thailand) PCL has a GF Score™ of 76/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Sanko Diecasting (Thailand) PCL's EBITDA Margin % compare to ORLY and AZO?
According to the Vehicles & Parts industry distribution chart, Sanko Diecasting (Thailand) PCL ranks #269 out of 1320 companies for EBITDA Margin %. This places Sanko Diecasting (Thailand) PCL in the top 20% of its industry — outperforming the majority of peers. The industry median EBITDA Margin % is 9.07. Sanko Diecasting (Thailand) PCL's value of 18.20% is 100.7% above this benchmark. Historically, Sanko Diecasting (Thailand) PCL's own EBITDA Margin % has ranged from 0.53 to 16.04 over the past decade. While the company's 10-year median is 9.15 vs. the industry median of 9.07, Sanko Diecasting (Thailand) PCL has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EBITDA Margin % for a Vehicles & Parts company?
The median EBITDA Margin % among Vehicles & Parts companies is 9.07, based on 1,320 companies in the industry. Companies in the top quartile (top 25%) have a EBITDA Margin % significantly above this median, while those in the bottom quartile fall well below. However, EBITDA Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Sanko Diecasting (Thailand) PCL's current EBITDA Margin % of 18.20% is 100.7% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EBITDA Margin % mean?
A high EBITDA Margin % can signal that a stock is expensive relative to its fundamentals. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Sanko Diecasting (Thailand) PCL and its competitors. For the Vehicles & Parts industry, the median EBITDA Margin % is 9.07 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Sanko Diecasting (Thailand) PCL's current EBITDA Margin % is 18.20%, which is 99% above median its own 10-year median of 9.15. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Sanko Diecasting (Thailand) PCL stock overvalued right now?
Based on GuruFocus' analysis, Sanko Diecasting (Thailand) PCL (BKK:SANKO) is currently considered Modestly Overvalued. The stock's GF Value™ is ฿1.08, compared to a current price of ฿1.34 — trading 24.1% above its estimated fair value. The current EBITDA Margin % is 18.20%, which is 99% above median its 10-year median of 9.15 and 100.7% above the Vehicles & Parts industry median of 9.07. Sanko Diecasting (Thailand) PCL's overall GF Score™ is 76/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EBITDA Margin % calculated?
EBITDA Margin % is calculated from a company's financial statements. For Sanko Diecasting (Thailand) PCL (BKK:SANKO), the current EBITDA Margin % is 18.20% as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Sanko Diecasting (Thailand) PCL (BKK:SANKO) Overvalued in 2026?
Based on GuruFocus' analysis, Sanko Diecasting (Thailand) PCL stock appears to be overvalued.
The current stock price of ฿1.34 is trading 24.1% above its estimated GF Value™ of ฿1.08.
GuruFocus considers Sanko Diecasting (Thailand) PCL to be Modestly Overvalued.
Key valuation signals for BKK:SANKO:
EBITDA Margin %: 18.20% (99% above median its 10-year median of 9.15)
GF Value™: ฿1.08 vs. price of ฿1.34 (24.1% above fair value)
Industry Position: 100.7% above the Vehicles & Parts median (#269 of 1320)
No single metric tells the full story. See the BKK:SANKO stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Sanko Diecasting (Thailand) PCL is involve manufacturing and distribution of aluminum parts products and mold. Its only operating segment being manufacturing and distribution of mold and aluminium parts. The company's product categories include automotive; motorcycles; electric; agricultural machinery and home decoration. Geographically, it operates only in Thailand. It derives a majority of revenue from sales of aluminum parts.
76GF Score
Get the complete analysis for BKK:SANKO
EBITDA Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BKK:SANKO has been successfully added to your 
