Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Sanko Diecasting (Thailand) PCL's PEG Ratio or its related term are showing as below:
BKK:SANKO'
s PEG Ratio Range Over the Past 10 Years
Min: 0.05 Med: 0.38 Max: 7.06
Current: 0.07
During the past 13 years, Sanko Diecasting (Thailand) PCL's highest PEG Ratio was 7.06. The lowest was 0.05. And the median was 0.38.
BKK:SANKO's PEG Ratio is ranked better than 98.5% of 667
companies
in the Vehicles & Parts industry
Industry Median: 1.13
vs BKK:SANKO: 0.07
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Sanko Diecasting (Thailand) PCL (BKK:SANKO) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Sanko Diecasting (Thailand) PCL PEG Ratio Related Terms
Sanko Diecasting (Thailand) PCL PEG Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Auto Parts subindustry, Sanko Diecasting (Thailand) PCL's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Sanko Diecasting (Thailand) PCL PEG Ratio vs Vehicles & Parts Industry
For the Vehicles & Parts industry and Consumer Cyclical sector, Sanko Diecasting (Thailand) PCL's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Sanko Diecasting (Thailand) PCL's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Sanko Diecasting (Thailand) PCL (BKK:SANKO) has a PEG Ratio of 0.07 as of Aug. 11, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Sanko Diecasting (Thailand) PCL and its competitors. This is 82% below median its historical median of 0.38. Over the past decade, Sanko Diecasting (Thailand) PCL's PEG Ratio has ranged from 0.05 to 7.06. According to the industry distribution chart, Sanko Diecasting (Thailand) PCL ranks #10 out of 667 companies in the Vehicles & Parts industry, placing it in the top 1.5%.
Is Sanko Diecasting (Thailand) PCL's PEG Ratio too high?
Sanko Diecasting (Thailand) PCL's current PEG Ratio of 0.07 is 82% below median its 10-year median of 0.38. Over the past 10 years, this metric has ranged from a low of 0.05 to a high of 7.06. The Vehicles & Parts industry median PEG Ratio is 1.13. Sanko Diecasting (Thailand) PCL's value of 0.07 is 93.8% below this industry median. Based on the distribution chart, Sanko Diecasting (Thailand) PCL ranks #10 out of 667 companies in the Vehicles & Parts industry, which is in the top quartile — a strong position relative to peers. Overall, Sanko Diecasting (Thailand) PCL has a GF Score™ of 76/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Sanko Diecasting (Thailand) PCL's PEG Ratio compare to ORLY and AZO?
According to the Vehicles & Parts industry distribution chart, Sanko Diecasting (Thailand) PCL ranks #10 out of 667 companies for PEG Ratio. This places Sanko Diecasting (Thailand) PCL in the top 2% of its industry — outperforming the majority of peers. The industry median PEG Ratio is 1.13. Sanko Diecasting (Thailand) PCL's value of 0.07 is 93.8% below this benchmark. Historically, Sanko Diecasting (Thailand) PCL's own PEG Ratio has ranged from 0.05 to 7.06 over the past decade. While the company's 10-year median is 0.38 vs. the industry median of 1.13, Sanko Diecasting (Thailand) PCL has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for a Vehicles & Parts company?
The median PEG Ratio among Vehicles & Parts companies is 1.13, based on 667 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Sanko Diecasting (Thailand) PCL's current PEG Ratio of 0.07 is 93.8% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Sanko Diecasting (Thailand) PCL and its competitors. For the Vehicles & Parts industry, the median PEG Ratio is 1.13 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Sanko Diecasting (Thailand) PCL's current PEG Ratio is 0.07, which is 82% below median its own 10-year median of 0.38. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Sanko Diecasting (Thailand) PCL stock overvalued right now?
Based on GuruFocus' analysis, Sanko Diecasting (Thailand) PCL (BKK:SANKO) is currently considered Modestly Overvalued. The stock's GF Value™ is ฿1.08, compared to a current price of ฿1.33 — trading 23.1% above its estimated fair value. The current PEG Ratio is 0.07, which is 82% below median its 10-year median of 0.38 and 93.8% below the Vehicles & Parts industry median of 1.13. Sanko Diecasting (Thailand) PCL's overall GF Score™ is 76/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Sanko Diecasting (Thailand) PCL (BKK:SANKO), the current PEG Ratio is 0.07 as of Aug. 11, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Sanko Diecasting (Thailand) PCL (BKK:SANKO) Overvalued in 2026?
Based on GuruFocus' analysis, Sanko Diecasting (Thailand) PCL stock appears to be overvalued.
The current stock price of ฿1.33 is trading 23.1% above its estimated GF Value™ of ฿1.08.
GuruFocus considers Sanko Diecasting (Thailand) PCL to be Modestly Overvalued.
Key valuation signals for BKK:SANKO:
PEG Ratio: 0.07 (82% below median its 10-year median of 0.38)
GF Value™: ฿1.08 vs. price of ฿1.33 (23.1% above fair value)
Industry Position: 93.8% below the Vehicles & Parts median (#10 of 667)
No single metric tells the full story. See the BKK:SANKO stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Sanko Diecasting (Thailand) PCL is involve manufacturing and distribution of aluminum parts products and mold. Its only operating segment being manufacturing and distribution of mold and aluminium parts. The company's product categories include automotive; motorcycles; electric; agricultural machinery and home decoration. Geographically, it operates only in Thailand. It derives a majority of revenue from sales of aluminum parts.
76GF Score
Get the complete analysis for BKK:SANKO
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BKK:SANKO has been successfully added to your 
