Electro Aco AltonaBSP:EALT4 +2.30%79 EBITDA Margin % is 13.44% as of Mar. 2026, which is 18% below its 10-year median of 16.34. GuruFocus rates BSP:EALT4 with a GF Score™ of 79/100 and a GF Value™ of R$12.33 (Fairly Valued). The stock has 7 warning signs investors should review. Among 3,039 Industrial Products companies, Electro Aco Altona ranks better than 63.41% on this metric.
EBITDA Margin % is calculated as EBITDA divided by its Revenue. Electro Aco Altona's EBITDA for the
three
months ended in Mar. 2026 was R$18.7 Mil. Electro Aco Altona's Revenue for the
three
months ended in Mar. 2026 was R$138.9 Mil. Therefore, Electro Aco Altona's EBITDA margin for the quarter that ended in Mar. 2026 was 13.44%.
EBITDA Margin % is the ratio of EBITDA divided by net sales or Revenue. It is an performance metric measuring company's operating profitability. EBITDA Margin takes depreciation and amortization, interest expense and tax into account, which makes it easy to compare the relative profitability of companies of different sizes in the same industry.
Electro Aco Altona EBITDA Margin % Related Terms
Electro Aco Altona EBITDA Margin % Historical Data
* Premium members only.
The historical data trend for Electro Aco Altona's EBITDA Margin % can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
BSP:EALT4 vs ATI, CRS, MLI: EBITDA Margin % Comparison
For the Metal Fabrication subindustry, Electro Aco Altona's EBITDA Margin %, along with its competitors' market caps and EBITDA Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Electro Aco Altona EBITDA Margin % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Electro Aco Altona's EBITDA Margin % distribution charts can be found below:
* The bar in red indicates where Electro Aco Altona's EBITDA Margin % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Electro Aco Altona (BSP:EALT4) has a EBITDA Margin % of 13.44% as of Mar. 2026. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Electro Aco Altona and its competitors. This is 18% below median its historical median of 16.34. Over the past decade, Electro Aco Altona's EBITDA Margin % has ranged from 8.87 to 36.03. According to the industry distribution chart, Electro Aco Altona ranks #1112 out of 3039 companies in the Industrial Products industry, placing it in the top 36.6%.
Is Electro Aco Altona's EBITDA Margin % too high?
Electro Aco Altona's current EBITDA Margin % of 13.44% is 18% below median its 10-year median of 16.34. Over the past 10 years, this metric has ranged from a low of 8.87 to a high of 36.03. The Industrial Products industry median EBITDA Margin % is 9.45. Electro Aco Altona's value of 13.44% is 42.2% above this industry median. Based on the distribution chart, Electro Aco Altona ranks #1112 out of 3039 companies in the Industrial Products industry, which is above the industry midpoint. Overall, Electro Aco Altona has a GF Score™ of 79/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Electro Aco Altona's EBITDA Margin % compare to ATI and CRS?
According to the Industrial Products industry distribution chart, Electro Aco Altona ranks #1112 out of 3039 companies for EBITDA Margin %. This puts Electro Aco Altona in the upper half of its industry. The industry median EBITDA Margin % is 9.45. Electro Aco Altona's value of 13.44% is 42.2% above this benchmark. Historically, Electro Aco Altona's own EBITDA Margin % has ranged from 8.87 to 36.03 over the past decade. While the company's 10-year median is 16.34 vs. the industry median of 9.45, Electro Aco Altona has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EBITDA Margin % for an Industrial Products company?
The median EBITDA Margin % among Industrial Products companies is 9.45, based on 3,039 companies in the industry. Companies in the top quartile (top 25%) have a EBITDA Margin % significantly above this median, while those in the bottom quartile fall well below. However, EBITDA Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Electro Aco Altona's current EBITDA Margin % of 13.44% is 42.2% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EBITDA Margin % mean?
A high EBITDA Margin % can signal that a stock is expensive relative to its fundamentals. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Electro Aco Altona and its competitors. For the Industrial Products industry, the median EBITDA Margin % is 9.45 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Electro Aco Altona's current EBITDA Margin % is 13.44%, which is 18% below median its own 10-year median of 16.34. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Electro Aco Altona stock overvalued right now?
Based on GuruFocus' analysis, Electro Aco Altona (BSP:EALT4) is currently considered Fairly Valued. The stock's GF Value™ is R$12.33, compared to a current price of R$12.45 — trading 1% above its estimated fair value. The current EBITDA Margin % is 13.44%, which is 18% below median its 10-year median of 16.34 and 42.2% above the Industrial Products industry median of 9.45. Electro Aco Altona's overall GF Score™ is 79/100 with 7 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EBITDA Margin % calculated?
EBITDA Margin % is calculated from a company's financial statements. For Electro Aco Altona (BSP:EALT4), the current EBITDA Margin % is 13.44% as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Electro Aco Altona (BSP:EALT4) Overvalued in 2026?
Based on GuruFocus' analysis, Electro Aco Altona stock appears to be overvalued.
The current stock price of R$12.45 is trading 1% above its estimated GF Value™ of R$12.33.
GuruFocus considers Electro Aco Altona to be Fairly Valued.
Key valuation signals for BSP:EALT4:
EBITDA Margin %: 13.44% (18% below median its 10-year median of 16.34)
GF Value™: R$12.33 vs. price of R$12.45 (1% above fair value)
Industry Position: 42.2% above the Industrial Products median (#1112 of 3039)
No single metric tells the full story. See the BSP:EALT4 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Electro Aco Altona SA manufactures steel based machinery & equipment. Its product portfolio comprises of carbon steel, high & low alloy steel, manganese steel & heat resistant steel castings. It caters to industries like earthmoving & mining.The company divides its business into two sectors: Repetitive and Custom. The Repetitive sector is responsible for series production of items for self-propelled equipment assemblers, including customers active in the segment of construction and mining machinery. The Custom sector produces customized parts and assemblies.
79GF Score
Get the complete analysis for BSP:EALT4
EBITDA Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BSP:EALT4 has been successfully added to your 
