Electro Aco AltonaBSP:EALT4 -0.76%77 PEG Ratio is 0.32 as of Jul. 07, 2026, which is 3% above its 10-year median of 0.31. GuruFocus rates BSP:EALT4 with a GF Score™ of 77/100 and a GF Value™ of R$12.35 (Fairly Valued). The stock has 8 warning signs investors should review. Among 1,280 Industrial Products companies, Electro Aco Altona ranks better than 93.52% on this metric.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Electro Aco Altona's PEG Ratio or its related term are showing as below:
BSP:EALT4'
s PEG Ratio Range Over the Past 10 Years
Min: 0.05 Med: 0.31 Max: 1.47
Current: 0.34
During the past 13 years, Electro Aco Altona's highest PEG Ratio was 1.47. The lowest was 0.05. And the median was 0.31.
BSP:EALT4's PEG Ratio is ranked better than 93.52% of 1280
companies
in the Industrial Products industry
Industry Median: 1.88
vs BSP:EALT4: 0.34
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Electro Aco Altona (BSP:EALT4) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Electro Aco Altona PEG Ratio Related Terms
Electro Aco Altona PEG Ratio Historical Data
* Premium members only.
The historical data trend for Electro Aco Altona's PEG Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Metal Fabrication subindustry, Electro Aco Altona's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Electro Aco Altona PEG Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Electro Aco Altona's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Electro Aco Altona's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Electro Aco Altona (BSP:EALT4) has a PEG Ratio of 0.32 as of Jul. 07, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Electro Aco Altona and its competitors. This is near median its historical median of 0.31. Over the past decade, Electro Aco Altona's PEG Ratio has ranged from 0.05 to 1.47. According to the industry distribution chart, Electro Aco Altona ranks #83 out of 1280 companies in the Industrial Products industry, placing it in the top 6.5%.
Is Electro Aco Altona's PEG Ratio too high?
Electro Aco Altona's current PEG Ratio of 0.32 is near median its 10-year median of 0.31. Over the past 10 years, this metric has ranged from a low of 0.05 to a high of 1.47. The Industrial Products industry median PEG Ratio is 1.88. Electro Aco Altona's value of 0.32 is 83% below this industry median. Based on the distribution chart, Electro Aco Altona ranks #83 out of 1280 companies in the Industrial Products industry, which is in the top quartile — a strong position relative to peers. Overall, Electro Aco Altona has a GF Score™ of 77/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Electro Aco Altona's PEG Ratio compare to CRS and ATI?
According to the Industrial Products industry distribution chart, Electro Aco Altona ranks #83 out of 1280 companies for PEG Ratio. This places Electro Aco Altona in the top 7% of its industry — outperforming the majority of peers. The industry median PEG Ratio is 1.88. Electro Aco Altona's value of 0.32 is 83% below this benchmark. Historically, Electro Aco Altona's own PEG Ratio has ranged from 0.05 to 1.47 over the past decade. While the company's 10-year median is 0.31 vs. the industry median of 1.88, Electro Aco Altona has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for an Industrial Products company?
The median PEG Ratio among Industrial Products companies is 1.88, based on 1,280 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Electro Aco Altona's current PEG Ratio of 0.32 is 83% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Electro Aco Altona and its competitors. For the Industrial Products industry, the median PEG Ratio is 1.88 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Electro Aco Altona's current PEG Ratio is 0.32, which is near median its own 10-year median of 0.31. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Electro Aco Altona stock overvalued right now?
Based on GuruFocus' analysis, Electro Aco Altona (BSP:EALT4) is currently considered Fairly Valued. The stock's GF Value™ is R$12.35, compared to a current price of R$11.80 — trading 4.5% below its estimated fair value. The current PEG Ratio is 0.32, which is near median its 10-year median of 0.31 and 83% below the Industrial Products industry median of 1.88. Electro Aco Altona's overall GF Score™ is 77/100 with 8 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Electro Aco Altona (BSP:EALT4), the current PEG Ratio is 0.32 as of Jul. 07, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Electro Aco Altona (BSP:EALT4) Overvalued in 2026?
Based on GuruFocus' analysis, Electro Aco Altona stock appears to be undervalued.
The current stock price of R$11.80 is trading 4.5% below its estimated GF Value™ of R$12.35.
GuruFocus considers Electro Aco Altona to be Fairly Valued.
Key valuation signals for BSP:EALT4:
PEG Ratio: 0.32 (near median its 10-year median of 0.31)
GF Value™: R$12.35 vs. price of R$11.80 (4.5% below fair value)
Industry Position: 83% below the Industrial Products median (#83 of 1280)
No single metric tells the full story. See the BSP:EALT4 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Electro Aco Altona SA manufactures steel based machinery & equipment. Its product portfolio comprises of carbon steel, high & low alloy steel, manganese steel & heat resistant steel castings. It caters to industries like earthmoving & mining.The company divides its business into two sectors: Repetitive and Custom. The Repetitive sector is responsible for series production of items for self-propelled equipment assemblers, including customers active in the segment of construction and mining machinery. The Custom sector produces customized parts and assemblies.
77GF Score
Get the complete analysis for BSP:EALT4
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BSP:EALT4 has been successfully added to your 
