Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Chian Hsing Forging Ind CoROCO:4528 67 EBITDA Margin % is 14.03% as of Dec. 2025, which is 29% below its 10-year median of 19.72. GuruFocus rates ROCO:4528 with a GF Score™ of 67/100 and a GF Value™ of NT$21.02 (Modestly Undervalued). The stock has 5 warning signs investors should review. Among 1,320 Vehicles & Parts companies, Chian Hsing Forging Ind Co ranks better than 71.97% on this metric.
Chian Hsing Forging Ind Co (ROCO:4528) EBITDA Margin % Explanation
EBITDA Margin % is the ratio of EBITDA divided by net sales or Revenue. It is an performance metric measuring company's operating profitability. EBITDA Margin takes depreciation and amortization, interest expense and tax into account, which makes it easy to compare the relative profitability of companies of different sizes in the same industry.
Chian Hsing Forging Ind Co EBITDA Margin % Related Terms
Chian Hsing Forging Ind Co EBITDA Margin % Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
ROCO:4528 vs ORLY, AZO: EBITDA Margin % Comparison
For the Auto Parts subindustry, Chian Hsing Forging Ind Co's EBITDA Margin %, along with its competitors' market caps and EBITDA Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Chian Hsing Forging Ind Co EBITDA Margin % vs Vehicles & Parts Industry
For the Vehicles & Parts industry and Consumer Cyclical sector, Chian Hsing Forging Ind Co's EBITDA Margin % distribution charts can be found below:
* The bar in red indicates where Chian Hsing Forging Ind Co's EBITDA Margin % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Chian Hsing Forging Ind Co (ROCO:4528) has a EBITDA Margin % of 14.03% as of Dec. 2025. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Chian Hsing Forging Ind Co and its competitors. This is 29% below median its historical median of 19.72. Over the past decade, Chian Hsing Forging Ind Co's EBITDA Margin % has ranged from 13.43 to 25.40. According to the industry distribution chart, Chian Hsing Forging Ind Co ranks #370 out of 1320 companies in the Vehicles & Parts industry, placing it in the top 28%.
Is Chian Hsing Forging Ind Co's EBITDA Margin % too high?
Chian Hsing Forging Ind Co's current EBITDA Margin % of 14.03% is 29% below median its 10-year median of 19.72. Over the past 10 years, this metric has ranged from a low of 13.43 to a high of 25.40. The Vehicles & Parts industry median EBITDA Margin % is 8.96. Chian Hsing Forging Ind Co's value of 14.03% is 56.6% above this industry median. Based on the distribution chart, Chian Hsing Forging Ind Co ranks #370 out of 1320 companies in the Vehicles & Parts industry, which is above the industry midpoint. Overall, Chian Hsing Forging Ind Co has a GF Score™ of 67/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Chian Hsing Forging Ind Co's EBITDA Margin % compare to ORLY and AZO?
According to the Vehicles & Parts industry distribution chart, Chian Hsing Forging Ind Co ranks #370 out of 1320 companies for EBITDA Margin %. This puts Chian Hsing Forging Ind Co in the upper half of its industry. The industry median EBITDA Margin % is 8.96. Chian Hsing Forging Ind Co's value of 14.03% is 56.6% above this benchmark. Historically, Chian Hsing Forging Ind Co's own EBITDA Margin % has ranged from 13.43 to 25.40 over the past decade. While the company's 10-year median is 19.72 vs. the industry median of 8.96, Chian Hsing Forging Ind Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EBITDA Margin % for a Vehicles & Parts company?
The median EBITDA Margin % among Vehicles & Parts companies is 8.96, based on 1,320 companies in the industry. Companies in the top quartile (top 25%) have a EBITDA Margin % significantly above this median, while those in the bottom quartile fall well below. However, EBITDA Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Chian Hsing Forging Ind Co's current EBITDA Margin % of 14.03% is 56.6% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EBITDA Margin % mean?
A high EBITDA Margin % can signal that a stock is expensive relative to its fundamentals. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Chian Hsing Forging Ind Co and its competitors. For the Vehicles & Parts industry, the median EBITDA Margin % is 8.96 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Chian Hsing Forging Ind Co's current EBITDA Margin % is 14.03%, which is 29% below median its own 10-year median of 19.72. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Chian Hsing Forging Ind Co stock overvalued right now?
Based on GuruFocus' analysis, Chian Hsing Forging Ind Co (ROCO:4528) is currently considered Modestly Undervalued. The stock's GF Value™ is NT$21.02, compared to a current price of NT$15.30 — trading 27.2% below its estimated fair value. The current EBITDA Margin % is 14.03%, which is 29% below median its 10-year median of 19.72 and 56.6% above the Vehicles & Parts industry median of 8.96. Chian Hsing Forging Ind Co's overall GF Score™ is 67/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EBITDA Margin % calculated?
EBITDA Margin % is calculated from a company's financial statements. For Chian Hsing Forging Ind Co (ROCO:4528), the current EBITDA Margin % is 14.03% as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Chian Hsing Forging Ind Co (ROCO:4528) Overvalued in 2026?
Based on GuruFocus' analysis, Chian Hsing Forging Ind Co stock appears to be undervalued.
The current stock price of NT$15.30 is trading 27.2% below its estimated GF Value™ of NT$21.02.
GuruFocus considers Chian Hsing Forging Ind Co to be Modestly Undervalued.
Key valuation signals for ROCO:4528:
EBITDA Margin %: 14.03% (29% below median its 10-year median of 19.72)
GF Value™: NT$21.02 vs. price of NT$15.30 (27.2% below fair value)
Industry Position: 56.6% above the Vehicles & Parts median (#370 of 1320)
No single metric tells the full story. See the ROCO:4528 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Chian Hsing Forging Ind Co Ltd manufactures a variety of forged products. The company is engaged in Auto parts forging, manufacturing, and processing. The products of the company include Track related products, automobile parts, motorbike parts, bicycle parts, mechanical parts, hardware tools, and pneumatic chisels. Geographically, the company operates in China, Taiwan, United States and others.
67GF Score
Get the complete analysis for ROCO:4528
EBITDA Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ROCO:4528 has been successfully added to your 
