Anhui Yingliu Electromechanical CoSHSE:603308 -1.86%68 EBITDA Margin % is 17.09% as of Mar. 2026, which is 34% below its 10-year median of 25.90. GuruFocus rates SHSE:603308 with a GF Score™ of 68/100 and a GF Value™ of ¥24.70 (Significantly Overvalued). The stock has 4 warning signs investors should review. Among 3,032 Industrial Products companies, Anhui Yingliu Electromechanical Co ranks better than 73.91% on this metric.
Anhui Yingliu Electromechanical Co (SHSE:603308) EBITDA Margin % Explanation
EBITDA Margin % is the ratio of EBITDA divided by net sales or Revenue. It is an performance metric measuring company's operating profitability. EBITDA Margin takes depreciation and amortization, interest expense and tax into account, which makes it easy to compare the relative profitability of companies of different sizes in the same industry.
Anhui Yingliu Electromechanical Co EBITDA Margin % Related Terms
Anhui Yingliu Electromechanical Co EBITDA Margin % Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Anhui Yingliu Electromechanical Co EBITDA Margin % Chart
SHSE:603308 vs CRS, ATI, MLI: EBITDA Margin % Comparison
For the Metal Fabrication subindustry, Anhui Yingliu Electromechanical Co's EBITDA Margin %, along with its competitors' market caps and EBITDA Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Anhui Yingliu Electromechanical Co EBITDA Margin % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Anhui Yingliu Electromechanical Co's EBITDA Margin % distribution charts can be found below:
* The bar in red indicates where Anhui Yingliu Electromechanical Co's EBITDA Margin % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Anhui Yingliu Electromechanical Co (SHSE:603308) has a EBITDA Margin % of 17.09% as of Mar. 2026. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Anhui Yingliu Electromechanical Co and its competitors. This is 34% below median its historical median of 25.90. Over the past decade, Anhui Yingliu Electromechanical Co's EBITDA Margin % has ranged from 15.70 to 33.92. According to the industry distribution chart, Anhui Yingliu Electromechanical Co ranks #791 out of 3032 companies in the Industrial Products industry, placing it in the top 26.1%.
Is Anhui Yingliu Electromechanical Co's EBITDA Margin % too high?
Anhui Yingliu Electromechanical Co's current EBITDA Margin % of 17.09% is 34% below median its 10-year median of 25.90. Over the past 10 years, this metric has ranged from a low of 15.70 to a high of 33.92. The Industrial Products industry median EBITDA Margin % is 9.46. Anhui Yingliu Electromechanical Co's value of 17.09% is 80.8% above this industry median. Based on the distribution chart, Anhui Yingliu Electromechanical Co ranks #791 out of 3032 companies in the Industrial Products industry, which is above the industry midpoint. Overall, Anhui Yingliu Electromechanical Co has a GF Score™ of 68/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Anhui Yingliu Electromechanical Co's EBITDA Margin % compare to CRS and ATI?
According to the Industrial Products industry distribution chart, Anhui Yingliu Electromechanical Co ranks #791 out of 3032 companies for EBITDA Margin %. This puts Anhui Yingliu Electromechanical Co in the upper half of its industry. The industry median EBITDA Margin % is 9.46. Anhui Yingliu Electromechanical Co's value of 17.09% is 80.8% above this benchmark. Historically, Anhui Yingliu Electromechanical Co's own EBITDA Margin % has ranged from 15.70 to 33.92 over the past decade. While the company's 10-year median is 25.90 vs. the industry median of 9.46, Anhui Yingliu Electromechanical Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EBITDA Margin % for an Industrial Products company?
The median EBITDA Margin % among Industrial Products companies is 9.46, based on 3,032 companies in the industry. Companies in the top quartile (top 25%) have a EBITDA Margin % significantly above this median, while those in the bottom quartile fall well below. However, EBITDA Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Anhui Yingliu Electromechanical Co's current EBITDA Margin % of 17.09% is 80.8% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EBITDA Margin % mean?
A high EBITDA Margin % can signal that a stock is expensive relative to its fundamentals. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Anhui Yingliu Electromechanical Co and its competitors. For the Industrial Products industry, the median EBITDA Margin % is 9.46 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Anhui Yingliu Electromechanical Co's current EBITDA Margin % is 17.09%, which is 34% below median its own 10-year median of 25.90. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Anhui Yingliu Electromechanical Co stock overvalued right now?
Based on GuruFocus' analysis, Anhui Yingliu Electromechanical Co (SHSE:603308) is currently considered Significantly Overvalued. The stock's GF Value™ is ¥24.70, compared to a current price of ¥59.57 — trading 141.2% above its estimated fair value. The current EBITDA Margin % is 17.09%, which is 34% below median its 10-year median of 25.90 and 80.8% above the Industrial Products industry median of 9.46. Anhui Yingliu Electromechanical Co's overall GF Score™ is 68/100 with 4 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EBITDA Margin % calculated?
EBITDA Margin % is calculated from a company's financial statements. For Anhui Yingliu Electromechanical Co (SHSE:603308), the current EBITDA Margin % is 17.09% as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Anhui Yingliu Electromechanical Co (SHSE:603308) Overvalued in 2026?
Based on GuruFocus' analysis, Anhui Yingliu Electromechanical Co stock appears to be overvalued.
The current stock price of ¥59.57 is trading 141.2% above its estimated GF Value™ of ¥24.70.
GuruFocus considers Anhui Yingliu Electromechanical Co to be Significantly Overvalued.
Key valuation signals for SHSE:603308:
EBITDA Margin %: 17.09% (34% below median its 10-year median of 25.90)
GF Value™: ¥24.70 vs. price of ¥59.57 (141.2% above fair value)
Industry Position: 80.8% above the Industrial Products median (#791 of 3032)
No single metric tells the full story. See the SHSE:603308 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Anhui Yingliu Electromechanical Co Business Description
Anhui Yingliu Electromechanical Co Ltd is a China based steel casting manufacturer. It develops, manufactures and sells high-precision steel casted and machined components for a range of key industrial applications. The company sells its products in China, and also exports it to the other countries.
68GF Score
Get the complete analysis for SHSE:603308
EBITDA Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
SHSE:603308 has been successfully added to your 
