SHSE:603308'
s Quick Ratio Range Over the Past 10 Years
Min: 0.46 Med: 0.6 Max: 1.17
Current: 0.76
During the past 13 years, Anhui Yingliu Electromechanical Co's highest Quick Ratio was 1.17. The lowest was 0.46. And the median was 0.60.
SHSE:603308's Quick Ratio is ranked worse than 83.71% of 3069
companies
in the Industrial Products industry
Industry Median: 1.39
vs SHSE:603308: 0.76
Anhui Yingliu Electromechanical Co (SHSE:603308) Quick Ratio Explanation
The quick ratio is more conservative than the Current Ratio because it excludes inventories from current assets. The ratio derives its name presumably from the fact that assets such as cash and marketable securities are quick sources of cash. Inventories generally take time to be converted into cash, and if they have to be sold quickly, the company may have to accept a lower price than book value of these inventories. As a result, they are justifiably excluded from assets that are ready sources of immediate cash.
In general, low or decreasing quick ratios generally suggest that a company is over-leveraged, struggling to maintain or grow sales, paying bills too quickly or collecting receivables too slowly. On the other hand, a high or increasing quick ratio generally indicates that a company is experiencing solid top-line growth, quickly converting receivables into cash, and easily able to cover its financial obligations. Such companies often have faster inventory turnover and cash conversion cycles.
The higher the quick ratio, the better the company's liquidity position.
Anhui Yingliu Electromechanical Co Quick Ratio Related Terms
Anhui Yingliu Electromechanical Co Quick Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Anhui Yingliu Electromechanical Co Quick Ratio Chart
SHSE:603308 vs CRS, ATI, MLI: Quick Ratio Comparison
For the Metal Fabrication subindustry, Anhui Yingliu Electromechanical Co's Quick Ratio, along with its competitors' market caps and Quick Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Anhui Yingliu Electromechanical Co Quick Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Anhui Yingliu Electromechanical Co's Quick Ratio distribution charts can be found below:
* The bar in red indicates where Anhui Yingliu Electromechanical Co's Quick Ratio falls into.
Anhui Yingliu Electromechanical Co Quick Ratio Calculation
The quick ratio measures a company's ability to meet its short-term obligations with its most liquid assets. For this reason, the ratio excludes inventories from current assets.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Anhui Yingliu Electromechanical Co (SHSE:603308) has a Quick Ratio of 0.76 as of Mar. 2026. Quick ratio is the ratio of current assets less inventory to current liabilities. View historical data on Anhui Yingliu Electromechanical Co and its competitors. This is 27% above median its historical median of 0.60. Over the past decade, Anhui Yingliu Electromechanical Co's Quick Ratio has ranged from 0.46 to 1.17. According to the industry distribution chart, Anhui Yingliu Electromechanical Co ranks #2569 out of 3069 companies in the Industrial Products industry, placing it in the top 83.7%.
Is Anhui Yingliu Electromechanical Co's Quick Ratio too high?
Anhui Yingliu Electromechanical Co's current Quick Ratio of 0.76 is 27% above median its 10-year median of 0.60. Over the past 10 years, this metric has ranged from a low of 0.46 to a high of 1.17. The Industrial Products industry median Quick Ratio is 1.39. Anhui Yingliu Electromechanical Co's value of 0.76 is 45.3% below this industry median. Based on the distribution chart, Anhui Yingliu Electromechanical Co ranks #2569 out of 3069 companies in the Industrial Products industry, which is in the bottom quartile relative to peers. Overall, Anhui Yingliu Electromechanical Co has a GF Score™ of 68/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Anhui Yingliu Electromechanical Co's Quick Ratio compare to CRS and ATI?
According to the Industrial Products industry distribution chart, Anhui Yingliu Electromechanical Co ranks #2569 out of 3069 companies for Quick Ratio. This places Anhui Yingliu Electromechanical Co in the lower half of its industry. The industry median Quick Ratio is 1.39. Anhui Yingliu Electromechanical Co's value of 0.76 is 45.3% below this benchmark. Historically, Anhui Yingliu Electromechanical Co's own Quick Ratio has ranged from 0.46 to 1.17 over the past decade. While the company's 10-year median is 0.60 vs. the industry median of 1.39, Anhui Yingliu Electromechanical Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Quick Ratio for an Industrial Products company?
The median Quick Ratio among Industrial Products companies is 1.39, based on 3,069 companies in the industry. Companies in the top quartile (top 25%) have a Quick Ratio significantly above this median, while those in the bottom quartile fall well below. However, Quick Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Anhui Yingliu Electromechanical Co's current Quick Ratio of 0.76 is 45.3% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Quick Ratio mean?
A high Quick Ratio can signal that a stock is expensive relative to its fundamentals. Quick ratio is the ratio of current assets less inventory to current liabilities. View historical data on Anhui Yingliu Electromechanical Co and its competitors. For the Industrial Products industry, the median Quick Ratio is 1.39 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Anhui Yingliu Electromechanical Co's current Quick Ratio is 0.76, which is 27% above median its own 10-year median of 0.60. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Anhui Yingliu Electromechanical Co stock overvalued right now?
Based on GuruFocus' analysis, Anhui Yingliu Electromechanical Co (SHSE:603308) is currently considered Significantly Overvalued. The stock's GF Value™ is ¥24.96, compared to a current price of ¥55.43 — trading 122.1% above its estimated fair value. The current Quick Ratio is 0.76, which is 27% above median its 10-year median of 0.60 and 45.3% below the Industrial Products industry median of 1.39. Anhui Yingliu Electromechanical Co's overall GF Score™ is 68/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Quick Ratio calculated?
Quick Ratio is calculated from a company's financial statements. For Anhui Yingliu Electromechanical Co (SHSE:603308), the current Quick Ratio is 0.76 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Anhui Yingliu Electromechanical Co (SHSE:603308) Overvalued in 2026?
Based on GuruFocus' analysis, Anhui Yingliu Electromechanical Co stock appears to be overvalued.
The current stock price of ¥55.43 is trading 122.1% above its estimated GF Value™ of ¥24.96.
GuruFocus considers Anhui Yingliu Electromechanical Co to be Significantly Overvalued.
Key valuation signals for SHSE:603308:
Quick Ratio: 0.76 (27% above median its 10-year median of 0.60)
GF Value™: ¥24.96 vs. price of ¥55.43 (122.1% above fair value)
Industry Position: 45.3% below the Industrial Products median (#2569 of 3069)
No single metric tells the full story. See the SHSE:603308 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Anhui Yingliu Electromechanical Co Business Description
Anhui Yingliu Electromechanical Co Ltd is a China based steel casting manufacturer. It develops, manufactures and sells high-precision steel casted and machined components for a range of key industrial applications. The company sells its products in China, and also exports it to the other countries.
68GF Score
Get the complete analysis for SHSE:603308
Quick Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
SHSE:603308 has been successfully added to your 
