Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
SHSE:603308'
s PEG Ratio Range Over the Past 10 Years
Min: 1.27 Med: 5.7 Max: 42.25
Current: 7.85
During the past 13 years, Anhui Yingliu Electromechanical Co's highest PEG Ratio was 42.25. The lowest was 1.27. And the median was 5.70.
SHSE:603308's PEG Ratio is ranked worse than 86.06% of 1277
companies
in the Industrial Products industry
Industry Median: 1.8
vs SHSE:603308: 7.85
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Anhui Yingliu Electromechanical Co (SHSE:603308) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Anhui Yingliu Electromechanical Co PEG Ratio Related Terms
Anhui Yingliu Electromechanical Co PEG Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Anhui Yingliu Electromechanical Co PEG Ratio Chart
SHSE:603308 vs CRS, ATI, MLI: PEG Ratio Comparison
For the Metal Fabrication subindustry, Anhui Yingliu Electromechanical Co's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Anhui Yingliu Electromechanical Co PEG Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Anhui Yingliu Electromechanical Co's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Anhui Yingliu Electromechanical Co's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Anhui Yingliu Electromechanical Co (SHSE:603308) has a PEG Ratio of 7.85 as of Jul. 22, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Anhui Yingliu Electromechanical Co and its competitors. This is 38% above median its historical median of 5.70. Over the past decade, Anhui Yingliu Electromechanical Co's PEG Ratio has ranged from 1.27 to 42.25. According to the industry distribution chart, Anhui Yingliu Electromechanical Co ranks #1099 out of 1277 companies in the Industrial Products industry, placing it in the top 86.1%.
Is Anhui Yingliu Electromechanical Co's PEG Ratio too high?
Anhui Yingliu Electromechanical Co's current PEG Ratio of 7.85 is 38% above median its 10-year median of 5.70. Over the past 10 years, this metric has ranged from a low of 1.27 to a high of 42.25. The Industrial Products industry median PEG Ratio is 1.80. Anhui Yingliu Electromechanical Co's value of 7.85 is 336.1% above this industry median. Based on the distribution chart, Anhui Yingliu Electromechanical Co ranks #1099 out of 1277 companies in the Industrial Products industry, which is in the bottom quartile relative to peers. Overall, Anhui Yingliu Electromechanical Co has a GF Score™ of 73/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Anhui Yingliu Electromechanical Co's PEG Ratio compare to CRS and ATI?
According to the Industrial Products industry distribution chart, Anhui Yingliu Electromechanical Co ranks #1099 out of 1277 companies for PEG Ratio. This places Anhui Yingliu Electromechanical Co in the lower half of its industry. The industry median PEG Ratio is 1.80. Anhui Yingliu Electromechanical Co's value of 7.85 is 336.1% above this benchmark. Historically, Anhui Yingliu Electromechanical Co's own PEG Ratio has ranged from 1.27 to 42.25 over the past decade. While the company's 10-year median is 5.70 vs. the industry median of 1.80, Anhui Yingliu Electromechanical Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for an Industrial Products company?
The median PEG Ratio among Industrial Products companies is 1.80, based on 1,277 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Anhui Yingliu Electromechanical Co's current PEG Ratio of 7.85 is 336.1% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Anhui Yingliu Electromechanical Co and its competitors. For the Industrial Products industry, the median PEG Ratio is 1.80 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Anhui Yingliu Electromechanical Co's current PEG Ratio is 7.85, which is 38% above median its own 10-year median of 5.70. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Anhui Yingliu Electromechanical Co stock overvalued right now?
Based on GuruFocus' analysis, Anhui Yingliu Electromechanical Co (SHSE:603308) is currently considered Significantly Overvalued. The stock's GF Value™ is ¥25.29, compared to a current price of ¥43.57 — trading 72.3% above its estimated fair value. The current PEG Ratio is 7.85, which is 38% above median its 10-year median of 5.70 and 336.1% above the Industrial Products industry median of 1.80. Anhui Yingliu Electromechanical Co's overall GF Score™ is 73/100 with 7 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Anhui Yingliu Electromechanical Co (SHSE:603308), the current PEG Ratio is 7.85 as of Jul. 22, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Anhui Yingliu Electromechanical Co (SHSE:603308) Overvalued in 2026?
Based on GuruFocus' analysis, Anhui Yingliu Electromechanical Co stock appears to be overvalued.
The current stock price of ¥43.57 is trading 72.3% above its estimated GF Value™ of ¥25.29.
GuruFocus considers Anhui Yingliu Electromechanical Co to be Significantly Overvalued.
Key valuation signals for SHSE:603308:
PEG Ratio: 7.85 (38% above median its 10-year median of 5.70)
GF Value™: ¥25.29 vs. price of ¥43.57 (72.3% above fair value)
Industry Position: 336.1% above the Industrial Products median (#1099 of 1277)
No single metric tells the full story. See the SHSE:603308 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Anhui Yingliu Electromechanical Co Business Description
Anhui Yingliu Electromechanical Co Ltd is a China based steel casting manufacturer. It develops, manufactures and sells high-precision steel casted and machined components for a range of key industrial applications. The company sells its products in China, and also exports it to the other countries.
73GF Score
Get the complete analysis for SHSE:603308
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
SHSE:603308 has been successfully added to your 
