Dmg Mori CoTSE:6141 -4.61%77 EBITDA Margin % is 9.40% as of Mar. 2026, which is 16% below its 10-year median of 11.14. GuruFocus rates TSE:6141 with a GF Score™ of 77/100 and a GF Value™ of 円2,792.96 (Modestly Overvalued). The stock has 13 warning signs investors should review. Among 3,039 Industrial Products companies, Dmg Mori Co ranks better than 53.54% on this metric.
EBITDA Margin % is calculated as EBITDA divided by its Revenue. Dmg Mori Co's EBITDA for the
three
months ended in Mar. 2026 was 円12,903 Mil. Dmg Mori Co's Revenue for the
three
months ended in Mar. 2026 was 円137,321 Mil. Therefore, Dmg Mori Co's EBITDA margin for the quarter that ended in Mar. 2026 was 9.40%.
Dmg Mori Co (TSE:6141) EBITDA Margin % Explanation
EBITDA Margin % is the ratio of EBITDA divided by net sales or Revenue. It is an performance metric measuring company's operating profitability. EBITDA Margin takes depreciation and amortization, interest expense and tax into account, which makes it easy to compare the relative profitability of companies of different sizes in the same industry.
Dmg Mori Co EBITDA Margin % Related Terms
Dmg Mori Co EBITDA Margin % Historical Data
* Premium members only.
The historical data trend for Dmg Mori Co's EBITDA Margin % can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
TSE:6141 vs GEV, ETN, PH: EBITDA Margin % Comparison
For the Specialty Industrial Machinery subindustry, Dmg Mori Co's EBITDA Margin %, along with its competitors' market caps and EBITDA Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Dmg Mori Co EBITDA Margin % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Dmg Mori Co's EBITDA Margin % distribution charts can be found below:
* The bar in red indicates where Dmg Mori Co's EBITDA Margin % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Dmg Mori Co (TSE:6141) has a EBITDA Margin % of 9.40% as of Mar. 2026. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Dmg Mori Co and its competitors. This is 16% below median its historical median of 11.14. Over the past decade, Dmg Mori Co's EBITDA Margin % has ranged from 5.33 to 15.13. According to the industry distribution chart, Dmg Mori Co ranks #1412 out of 3039 companies in the Industrial Products industry, placing it in the top 46.5%.
Is Dmg Mori Co's EBITDA Margin % too high?
Dmg Mori Co's current EBITDA Margin % of 9.40% is 16% below median its 10-year median of 11.14. Over the past 10 years, this metric has ranged from a low of 5.33 to a high of 15.13. The Industrial Products industry median EBITDA Margin % is 9.45. Dmg Mori Co's value of 9.40% is 0.5% below this industry median. Based on the distribution chart, Dmg Mori Co ranks #1412 out of 3039 companies in the Industrial Products industry, which is above the industry midpoint. Overall, Dmg Mori Co has a GF Score™ of 77/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Dmg Mori Co's EBITDA Margin % compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Dmg Mori Co ranks #1412 out of 3039 companies for EBITDA Margin %. This puts Dmg Mori Co in the upper half of its industry. The industry median EBITDA Margin % is 9.45. Dmg Mori Co's value of 9.40% is 0.5% below this benchmark. Historically, Dmg Mori Co's own EBITDA Margin % has ranged from 5.33 to 15.13 over the past decade. While the company's 10-year median is 11.14 vs. the industry median of 9.45, Dmg Mori Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EBITDA Margin % for an Industrial Products company?
The median EBITDA Margin % among Industrial Products companies is 9.45, based on 3,039 companies in the industry. Companies in the top quartile (top 25%) have a EBITDA Margin % significantly above this median, while those in the bottom quartile fall well below. However, EBITDA Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Dmg Mori Co's current EBITDA Margin % of 9.40% is 0.5% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EBITDA Margin % mean?
A high EBITDA Margin % can signal that a stock is expensive relative to its fundamentals. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Dmg Mori Co and its competitors. For the Industrial Products industry, the median EBITDA Margin % is 9.45 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Dmg Mori Co's current EBITDA Margin % is 9.40%, which is 16% below median its own 10-year median of 11.14. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Dmg Mori Co stock overvalued right now?
Based on GuruFocus' analysis, Dmg Mori Co (TSE:6141) is currently considered Modestly Overvalued. The stock's GF Value™ is 円2,792.96, compared to a current price of 円3,516.00 — trading 25.9% above its estimated fair value. The current EBITDA Margin % is 9.40%, which is 16% below median its 10-year median of 11.14 and 0.5% below the Industrial Products industry median of 9.45. Dmg Mori Co's overall GF Score™ is 77/100 with 13 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EBITDA Margin % calculated?
EBITDA Margin % is calculated from a company's financial statements. For Dmg Mori Co (TSE:6141), the current EBITDA Margin % is 9.40% as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Dmg Mori Co (TSE:6141) Overvalued in 2026?
Based on GuruFocus' analysis, Dmg Mori Co stock appears to be overvalued.
The current stock price of 円3,516.00 is trading 25.9% above its estimated GF Value™ of 円2,792.96.
GuruFocus considers Dmg Mori Co to be Modestly Overvalued.
Key valuation signals for TSE:6141:
EBITDA Margin %: 9.40% (16% below median its 10-year median of 11.14)
GF Value™: 円2,792.96 vs. price of 円3,516.00 (25.9% above fair value)
Industry Position: 0.5% below the Industrial Products median (#1412 of 3039)
No single metric tells the full story. See the TSE:6141 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Dmg Mori Co Ltd is a manufacturer of machining tools used in various industries. The company specializes in industrial machining tools such as drills, mills, multiple axis turning centers, and CNC machines, as well as laser and ultrasonic cutting machines. Other products are complementary tools and applications to enhance the workplace around industrial machining tools, such as balancing devices and tool-handling devices. The product segments are the 5-axis machines and multipath mills. The end markets are homogeneously split between Germany, the rest of Europe, Asia and China, the Americas, and Japan.
77GF Score
Get the complete analysis for TSE:6141
EBITDA Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TSE:6141 has been successfully added to your 
