Dmg Mori Co (TSE:6141) Margin of Safety % (DCF FCF Based): -2,737.77% (As of Jun. 27, 2026)


TSE:6141 Dmg Mori Co Ltd TSE:6141
77 GF Score
Price 円3,516.00
GF Value 円2,792.96
Valuation Modestly Overvalued
! 13 Warning Signs
View Full Analysis

What is Dmg Mori Co Margin of Safety % (DCF FCF Based)?

Dmg Mori Co TSE:6141 -4.61% 77 Margin of Safety % (DCF FCF Based) is -2,737.77% as of Jun. 27, 2026. GuruFocus rates TSE:6141 with a GF Score™ of 77/100 and a GF Value™ of 円2,792.96 (Modestly Overvalued). The stock has 13 warning signs investors should review.

Margin of Safety % (DCF FCF Based) = (Intrinsic Value: DCF (FCF Based) - Current Price) / Intrinsic Value: DCF (FCF Based).

Note: Discounted FCF model is only suitable for predictable companies (Business Predictability Rank higher than 1-Star). If the company's Predictability Rank is 1-Star or Not Rated, result may not be accurate due to the low predictability of business and the data will not be stored into our database.

As of today (2026-06-27), Dmg Mori Co's Predictability Rank is 2.5-Stars. Dmg Mori Co's intrinsic value calculated from the Discounted FCF model is 円1460.68 and current share price is 円3516.00. Consequently,

Dmg Mori Co's Margin of Safety % (DCF FCF Based) using Discounted FCF model is -2,737.77%.

TSE:6141 vs GEV, ETN, PH: Margin of Safety % (DCF FCF Based) Comparison

For the Specialty Industrial Machinery subindustry, Dmg Mori Co's Margin of Safety % (DCF FCF Based), along with its competitors' market caps and Margin of Safety % (DCF FCF Based) data, can be viewed below:

* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.

Dmg Mori Co Margin of Safety % (DCF FCF Based) vs Industrial Products Industry

For the Industrial Products industry and Industrials sector, Dmg Mori Co's Margin of Safety % (DCF FCF Based) distribution charts can be found below:

* The bar in red indicates where Dmg Mori Co's Margin of Safety % (DCF FCF Based) falls into.


TSE:6141
77GF Score
Dmg Mori Co Ltd TSE:6141
Margin of Safety % (DCF FCF Based) is just one metric. See GF Score™, valuation, warning signs, and more.
View Full Analysis

Dmg Mori Co Margin of Safety % (DCF FCF Based) Calculation

Dmg Mori Co's Margin of Safety % (DCF FCF Based) for today is calculated as

Margin of Safety % (DCF FCF Based)=(Intrinsic Value: DCF (FCF Based)-Current Price)/Intrinsic Value: DCF (FCF Based)
=(123.90-3516.00)/123.90
=-2,737.77 %

* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD.
* For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.

The intrinsic value is calculated from the Discounted FCF model with default parameters. The calculation method is the same as Discounted Earnings model except free cash flow are used in the calculation instead of earnings per share.

What does a Margin of Safety % (DCF FCF Based) of -2,737.77% mean?
Dmg Mori Co (TSE:6141) has a Margin of Safety % (DCF FCF Based) of -2,737.77% as of Jun. 27, 2026. Margin of Safety % (DCF FCF Based) is the percent difference between the current price and the intrinsic DCF FCF price. View historical data on Dmg Mori Co.
Is Dmg Mori Co's Margin of Safety % (DCF FCF Based) too high?
Dmg Mori Co's current Margin of Safety % (DCF FCF Based) is -2,737.77%. Overall, Dmg Mori Co has a GF Score™ of 77/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Dmg Mori Co's Margin of Safety % (DCF FCF Based) compare to GEV and ETN?
Dmg Mori Co's Margin of Safety % (DCF FCF Based) of -2,737.77% can be compared against companies in the Industrial Products industry. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Margin of Safety % (DCF FCF Based) for an Industrial Products company?
A good Margin of Safety % (DCF FCF Based) depends on the Industrial Products industry context. However, Margin of Safety % (DCF FCF Based) should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Margin of Safety % (DCF FCF Based) mean?
A high Margin of Safety % (DCF FCF Based) can signal that a stock is expensive relative to its fundamentals. Margin of Safety % (DCF FCF Based) is the percent difference between the current price and the intrinsic DCF FCF price. View historical data on Dmg Mori Co. Dmg Mori Co's current Margin of Safety % (DCF FCF Based) is -2,737.77%. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Dmg Mori Co stock overvalued right now?
Based on GuruFocus' analysis, Dmg Mori Co (TSE:6141) is currently considered Modestly Overvalued. The stock's GF Value™ is 円2,792.96, compared to a current price of 円3,516.00 — trading 25.9% above its estimated fair value. The current Margin of Safety % (DCF FCF Based) is -2,737.77%. Dmg Mori Co's overall GF Score™ is 77/100 with 13 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Margin of Safety % (DCF FCF Based) calculated?
Margin of Safety % (DCF FCF Based) is calculated from a company's financial statements. For Dmg Mori Co (TSE:6141), the current Margin of Safety % (DCF FCF Based) is -2,737.77% as of Jun. 27, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.

Is Dmg Mori Co (TSE:6141) Overvalued in 2026?

Based on GuruFocus' analysis, Dmg Mori Co stock appears to be overvalued. The current stock price of 円3,516.00 is trading 25.9% above its estimated GF Value™ of 円2,792.96. GuruFocus considers Dmg Mori Co to be Modestly Overvalued.

Key valuation signals for TSE:6141:

  • Margin of Safety % (DCF FCF Based): -2,737.77%
  • GF Value™: 円2,792.96 vs. price of 円3,516.00 (25.9% above fair value)
  • GF Score™: 77/100 with 13 warning signs

No single metric tells the full story. See the TSE:6141 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.

Dmg Mori Co Business Description

Other Exchanges MRSKF:USA0MO:Germany
Address 2-3-23 Shiomi, Koto-ku, Tokyo, JPN, 135-0052
Dmg Mori Co Ltd is a manufacturer of machining tools used in various industries. The company specializes in industrial machining tools such as drills, mills, multiple axis turning centers, and CNC machines, as well as laser and ultrasonic cutting machines. Other products are complementary tools and applications to enhance the workplace around industrial machining tools, such as balancing devices and tool-handling devices. The product segments are the 5-axis machines and multipath mills. The end markets are homogeneously split between Germany, the rest of Europe, Asia and China, the Americas, and Japan.
77GF Score

Get the complete analysis for TSE:6141

Margin of Safety % (DCF FCF Based) is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.

円3,516.00
Price
円2,792.96
GF Value