Dmg Mori CoTSE:6141 +3.73%79 Pretax Margin % is 1.43% as of Mar. 2026, which is 76% below its 10-year median of 5.90. GuruFocus rates TSE:6141 with a GF Score™ of 79/100 and a GF Value™ of 円2,797.36 (Significantly Overvalued). The stock has 13 warning signs investors should review. Among 3,032 Industrial Products companies, Dmg Mori Co ranks worse than 66.79% on this metric.
Pre-Tax margin is calculated as Pre-Tax Income divided by its Revenue. Dmg Mori Co's Pre-Tax Income for the
three
months ended in Mar. 2026 was 円1,968 Mil. Dmg Mori Co's Revenue for the
three
months ended in Mar. 2026 was 円137,321 Mil. Therefore, Dmg Mori Co's pretax margin for the quarter that ended in Mar. 2026 was 1.43%.
The historical rank and industry rank for Dmg Mori Co's Pretax Margin % or its related term are showing as below:
TSE:6141'
s Pretax Margin % Range Over the Past 10 Years
Min: -0.28 Med: 5.9 Max: 8.95
Current: 2.28
TSE:6141's Pretax Margin % is ranked worse than 66.79% of 3032
companies
in the Industrial Products industry
Industry Median: 5.83
vs TSE:6141: 2.28
Dmg Mori Co (TSE:6141) Pretax Margin % Explanation
The pretax margin, as know as pretax profit margin, is widely used to measure the operating efficiency of a company before deducting taxes.
The pretax margin is sometimes preferred over the net margin as tax expenditures can make profitability comparisons between companies misleading.
It is a useful tool to compare companies operating in the same sector and less effective when comparing companies from other sectors as each industry generally has different operating expenses and sales patterns.
The long term trend of the pretax margin is a good indicator of the competitiveness and health of the business.
Dmg Mori Co Pretax Margin % Related Terms
Dmg Mori Co Pretax Margin % Historical Data
* Premium members only.
The historical data trend for Dmg Mori Co's Pretax Margin % can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
TSE:6141 vs GEV, ETN, PH: Pretax Margin % Comparison
For the Specialty Industrial Machinery subindustry, Dmg Mori Co's Pretax Margin %, along with its competitors' market caps and Pretax Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Dmg Mori Co Pretax Margin % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Dmg Mori Co's Pretax Margin % distribution charts can be found below:
* The bar in red indicates where Dmg Mori Co's Pretax Margin % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Dmg Mori Co (TSE:6141) has a Pretax Margin % of 1.43% as of Mar. 2026. Pre-Tax margin is the ratio of total pre-tax income to net sales. View historical data on Dmg Mori Co and its competitors. This is 76% below median its historical median of 5.90. According to the industry distribution chart, Dmg Mori Co ranks #2025 out of 3032 companies in the Industrial Products industry, placing it in the top 66.8%.
Is Dmg Mori Co's Pretax Margin % too high?
Dmg Mori Co's current Pretax Margin % of 1.43% is 76% below median its 10-year median of 5.90. The Industrial Products industry median Pretax Margin % is 5.83. Dmg Mori Co's value of 1.43% is 75.5% below this industry median. Based on the distribution chart, Dmg Mori Co ranks #2025 out of 3032 companies in the Industrial Products industry, which is below the industry midpoint. Overall, Dmg Mori Co has a GF Score™ of 79/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Dmg Mori Co's Pretax Margin % compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Dmg Mori Co ranks #2025 out of 3032 companies for Pretax Margin %. This places Dmg Mori Co in the lower half of its industry. The industry median Pretax Margin % is 5.83. Dmg Mori Co's value of 1.43% is 75.5% below this benchmark. While the company's 10-year median is 5.90 vs. the industry median of 5.83, Dmg Mori Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Pretax Margin % for an Industrial Products company?
The median Pretax Margin % among Industrial Products companies is 5.83, based on 3,032 companies in the industry. Companies in the top quartile (top 25%) have a Pretax Margin % significantly above this median, while those in the bottom quartile fall well below. However, Pretax Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Dmg Mori Co's current Pretax Margin % of 1.43% is 75.5% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Pretax Margin % mean?
A high Pretax Margin % can signal that a stock is expensive relative to its fundamentals. Pre-Tax margin is the ratio of total pre-tax income to net sales. View historical data on Dmg Mori Co and its competitors. For the Industrial Products industry, the median Pretax Margin % is 5.83 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Dmg Mori Co's current Pretax Margin % is 1.43%, which is 76% below median its own 10-year median of 5.90. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Dmg Mori Co stock overvalued right now?
Based on GuruFocus' analysis, Dmg Mori Co (TSE:6141) is currently considered Significantly Overvalued. The stock's GF Value™ is 円2,797.36, compared to a current price of 円3,750.00 — trading 34.1% above its estimated fair value. The current Pretax Margin % is 1.43%, which is 76% below median its 10-year median of 5.90 and 75.5% below the Industrial Products industry median of 5.83. Dmg Mori Co's overall GF Score™ is 79/100 with 13 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Pretax Margin % calculated?
Pretax Margin % is calculated from a company's financial statements. For Dmg Mori Co (TSE:6141), the current Pretax Margin % is 1.43% as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Dmg Mori Co (TSE:6141) Overvalued in 2026?
Based on GuruFocus' analysis, Dmg Mori Co stock appears to be overvalued.
The current stock price of 円3,750.00 is trading 34.1% above its estimated GF Value™ of 円2,797.36.
GuruFocus considers Dmg Mori Co to be Significantly Overvalued.
Key valuation signals for TSE:6141:
Pretax Margin %: 1.43% (76% below median its 10-year median of 5.90)
GF Value™: 円2,797.36 vs. price of 円3,750.00 (34.1% above fair value)
Industry Position: 75.5% below the Industrial Products median (#2025 of 3032)
No single metric tells the full story. See the TSE:6141 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Dmg Mori Co Ltd is a manufacturer of machining tools used in various industries. The company specializes in industrial machining tools such as drills, mills, multiple axis turning centers, and CNC machines, as well as laser and ultrasonic cutting machines. Other products are complementary tools and applications to enhance the workplace around industrial machining tools, such as balancing devices and tool-handling devices. The product segments are the 5-axis machines and multipath mills. The end markets are homogeneously split between Germany, the rest of Europe, Asia and China, the Americas, and Japan.
79GF Score
Get the complete analysis for TSE:6141
Pretax Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TSE:6141 has been successfully added to your 
