Malaysia Steel Works (KL) Bhd ShsXKLS:5098 43 EBITDA Margin % is 2.06% as of Mar. 2026, which is 43% below its 10-year median of 3.63. GuruFocus rates XKLS:5098 with a GF Score™ of 43/100 and a GF Value™ of RM0.39 (Possible Value Trap). The stock has 7 warning signs investors should review. Among 615 Steel companies, Malaysia Steel Works (KL) Bhd Shs ranks worse than 69.59% on this metric.
Malaysia Steel Works (KL) Bhd Shs (XKLS:5098) EBITDA Margin % Explanation
EBITDA Margin % is the ratio of EBITDA divided by net sales or Revenue. It is an performance metric measuring company's operating profitability. EBITDA Margin takes depreciation and amortization, interest expense and tax into account, which makes it easy to compare the relative profitability of companies of different sizes in the same industry.
Malaysia Steel Works (KL) Bhd Shs EBITDA Margin % Related Terms
Malaysia Steel Works (KL) Bhd Shs EBITDA Margin % Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Malaysia Steel Works (KL) Bhd Shs EBITDA Margin % Chart
XKLS:5098 vs NUE, STLD, RS: EBITDA Margin % Comparison
For the Steel subindustry, Malaysia Steel Works (KL) Bhd Shs's EBITDA Margin %, along with its competitors' market caps and EBITDA Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Malaysia Steel Works (KL) Bhd Shs EBITDA Margin % vs Steel Industry
For the Steel industry and Basic Materials sector, Malaysia Steel Works (KL) Bhd Shs's EBITDA Margin % distribution charts can be found below:
* The bar in red indicates where Malaysia Steel Works (KL) Bhd Shs's EBITDA Margin % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Malaysia Steel Works (KL) Bhd Shs (XKLS:5098) has a EBITDA Margin % of 2.06% as of Mar. 2026. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Malaysia Steel Works (KL) Bhd Shs and its competitors. This is 43% below median its historical median of 3.63. Over the past decade, Malaysia Steel Works (KL) Bhd Shs' EBITDA Margin % has ranged from 2.71 to 8.14. According to the industry distribution chart, Malaysia Steel Works (KL) Bhd Shs ranks #428 out of 615 companies in the Steel industry, placing it in the top 69.6%.
Is Malaysia Steel Works (KL) Bhd Shs' EBITDA Margin % too high?
Malaysia Steel Works (KL) Bhd Shs' current EBITDA Margin % of 2.06% is 43% below median its 10-year median of 3.63. Over the past 10 years, this metric has ranged from a low of 2.71 to a high of 8.14. The Steel industry median EBITDA Margin % is 6.11. Malaysia Steel Works (KL) Bhd Shs' value of 2.06% is 66.3% below this industry median. Based on the distribution chart, Malaysia Steel Works (KL) Bhd Shs ranks #428 out of 615 companies in the Steel industry, which is below the industry midpoint. Overall, Malaysia Steel Works (KL) Bhd Shs has a GF Score™ of 43/100 and is considered Possible Value Trap, reflecting its overall financial health beyond just this single metric.
How does Malaysia Steel Works (KL) Bhd Shs' EBITDA Margin % compare to NUE and STLD?
According to the Steel industry distribution chart, Malaysia Steel Works (KL) Bhd Shs ranks #428 out of 615 companies for EBITDA Margin %. This places Malaysia Steel Works (KL) Bhd Shs in the lower half of its industry. The industry median EBITDA Margin % is 6.11. Malaysia Steel Works (KL) Bhd Shs' value of 2.06% is 66.3% below this benchmark. Historically, Malaysia Steel Works (KL) Bhd Shs' own EBITDA Margin % has ranged from 2.71 to 8.14 over the past decade. While the company's 10-year median is 3.63 vs. the industry median of 6.11, Malaysia Steel Works (KL) Bhd Shs has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EBITDA Margin % for a Steel company?
The median EBITDA Margin % among Steel companies is 6.11, based on 615 companies in the industry. Companies in the top quartile (top 25%) have a EBITDA Margin % significantly above this median, while those in the bottom quartile fall well below. However, EBITDA Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Malaysia Steel Works (KL) Bhd Shs's current EBITDA Margin % of 2.06% is 66.3% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EBITDA Margin % mean?
A high EBITDA Margin % can signal that a stock is expensive relative to its fundamentals. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Malaysia Steel Works (KL) Bhd Shs and its competitors. For the Steel industry, the median EBITDA Margin % is 6.11 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Malaysia Steel Works (KL) Bhd Shs's current EBITDA Margin % is 2.06%, which is 43% below median its own 10-year median of 3.63. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Malaysia Steel Works (KL) Bhd Shs stock overvalued right now?
Based on GuruFocus' analysis, Malaysia Steel Works (KL) Bhd Shs (XKLS:5098) is currently considered Possible Value Trap. The stock's GF Value™ is RM0.39, compared to a current price of RM0.23 — trading 41% below its estimated fair value. The current EBITDA Margin % is 2.06%, which is 43% below median its 10-year median of 3.63 and 66.3% below the Steel industry median of 6.11. Malaysia Steel Works (KL) Bhd Shs' overall GF Score™ is 43/100 with 7 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EBITDA Margin % calculated?
EBITDA Margin % is calculated from a company's financial statements. For Malaysia Steel Works (KL) Bhd Shs (XKLS:5098), the current EBITDA Margin % is 2.06% as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Malaysia Steel Works (KL) Bhd Shs (XKLS:5098) Overvalued in 2026?
Based on GuruFocus' analysis, Malaysia Steel Works (KL) Bhd Shs stock appears to be undervalued.
The current stock price of RM0.23 is trading 41% below its estimated GF Value™ of RM0.39.
GuruFocus considers Malaysia Steel Works (KL) Bhd Shs to be Possible Value Trap.
Key valuation signals for XKLS:5098:
EBITDA Margin %: 2.06% (43% below median its 10-year median of 3.63)
GF Value™: RM0.39 vs. price of RM0.23 (41% below fair value)
Industry Position: 66.3% below the Steel median (#428 of 615)
No single metric tells the full story. See the XKLS:5098 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Malaysia Steel Works (KL) Bhd Shs Business Description
Malaysia Steel Works (KL) Bhd Shs engages in the manufacturing and marketing of high tensile steel bars, mild steel bars, and prime steel billets. These steel products are used in construction and infrastructure works. The company is organized in one business segment which is the Manufacturing of steel bars and billets. Geographically, the group has a business presence in Malaysia and Outside Malaysia, of which prime revenue is derived from Malaysia.
43GF Score
Get the complete analysis for XKLS:5098
EBITDA Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
XKLS:5098 has been successfully added to your 
