Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
This is a more accurate valuation of companies' operation because it considers the debt and cash on its balance sheet, and non-operating items such as interest payment, tax, and one-time items are not included in the Operating Income.
Jainam Ferro Alloys (I)'s Enterprise Value for the quarter that ended in Mar. 2026 was ₹1,988 Mil.
For company reported semi-annually, GuruFocus uses latest annual data as the TTM data. Jainam Ferro Alloys (I)'s EBIT for the trailing twelve months (TTM) ended in Mar. 2026 was ₹105 Mil.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Jainam Ferro Alloys (I) EV-to-EBIT Related Terms
Jainam Ferro Alloys (I) EV-to-EBIT Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
NSE:JAINAM vs NUE, STLD, RS: EV-to-EBIT Comparison
For the Steel subindustry, Jainam Ferro Alloys (I)'s EV-to-EBIT, along with its competitors' market caps and EV-to-EBIT data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Jainam Ferro Alloys (I) EV-to-EBIT vs Steel Industry
For the Steel industry and Basic Materials sector, Jainam Ferro Alloys (I)'s EV-to-EBIT distribution charts can be found below:
* The bar in red indicates where Jainam Ferro Alloys (I)'s EV-to-EBIT falls into.
Jainam Ferro Alloys (I)'s current Enterprise Value is ₹2,089 Mil.
For company reported semi-annually, GuruFocus uses latest annual data as the TTM data. Jainam Ferro Alloys (I)'s EBIT for the trailing twelve months (TTM) ended in Mar. 2026 was ₹105 Mil.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Jainam Ferro Alloys (I) (NSE:JAINAM) has a EV-to-EBIT of 19.97 as of Sep. 07, 2026. EV to EBIT ratio is the inverse of Joel Greenblatt's earnings yield definition. View historical data on Jainam Ferro Alloys (I) and its competitors. This is 50% below median its historical median of 40.20. Over the past decade, Jainam Ferro Alloys (I)'s EV-to-EBIT has ranged from 8.95 to 299.45. According to the industry distribution chart, Jainam Ferro Alloys (I) ranks #338 out of 493 companies in the Steel industry, placing it in the top 68.6%.
Is Jainam Ferro Alloys (I)'s EV-to-EBIT too high?
Jainam Ferro Alloys (I)'s current EV-to-EBIT of 19.97 is 50% below median its 10-year median of 40.20. Over the past 10 years, this metric has ranged from a low of 8.95 to a high of 299.45. The Steel industry median EV-to-EBIT is 12.69. Jainam Ferro Alloys (I)'s value of 19.97 is 57.4% above this industry median. Based on the distribution chart, Jainam Ferro Alloys (I) ranks #338 out of 493 companies in the Steel industry, which is below the industry midpoint. Overall, Jainam Ferro Alloys (I) has a GF Score™ of 87/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Jainam Ferro Alloys (I)'s EV-to-EBIT compare to NUE and STLD?
According to the Steel industry distribution chart, Jainam Ferro Alloys (I) ranks #338 out of 493 companies for EV-to-EBIT. This places Jainam Ferro Alloys (I) in the lower half of its industry. The industry median EV-to-EBIT is 12.69. Jainam Ferro Alloys (I)'s value of 19.97 is 57.4% above this benchmark. Historically, Jainam Ferro Alloys (I)'s own EV-to-EBIT has ranged from 8.95 to 299.45 over the past decade. While the company's 10-year median is 40.20 vs. the industry median of 12.69, Jainam Ferro Alloys (I) has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EV-to-EBIT for a Steel company?
The median EV-to-EBIT among Steel companies is 12.69, based on 493 companies in the industry. Companies in the top quartile (top 25%) have a EV-to-EBIT significantly above this median, while those in the bottom quartile fall well below. However, EV-to-EBIT should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Jainam Ferro Alloys (I)'s current EV-to-EBIT of 19.97 is 57.4% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EV-to-EBIT mean?
A high EV-to-EBIT can signal that a stock is expensive relative to its fundamentals. EV to EBIT ratio is the inverse of Joel Greenblatt's earnings yield definition. View historical data on Jainam Ferro Alloys (I) and its competitors. For the Steel industry, the median EV-to-EBIT is 12.69 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Jainam Ferro Alloys (I)'s current EV-to-EBIT is 19.97, which is 50% below median its own 10-year median of 40.20. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Jainam Ferro Alloys (I) stock overvalued right now?
Based on GuruFocus' analysis, Jainam Ferro Alloys (I) (NSE:JAINAM) is currently considered Modestly Undervalued. The stock's GF Value™ is ₹246.70, compared to a current price of ₹203.50 — trading 17.5% below its estimated fair value. The current EV-to-EBIT is 19.97, which is 50% below median its 10-year median of 40.20 and 57.4% above the Steel industry median of 12.69. Jainam Ferro Alloys (I)'s overall GF Score™ is 87/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EV-to-EBIT calculated?
EV-to-EBIT is calculated from a company's financial statements. For Jainam Ferro Alloys (I) (NSE:JAINAM), the current EV-to-EBIT is 19.97 as of Sep. 07, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Jainam Ferro Alloys (I) (NSE:JAINAM) Overvalued in 2026?
Based on GuruFocus' analysis, Jainam Ferro Alloys (I) stock appears to be undervalued.
The current stock price of ₹203.50 is trading 17.5% below its estimated GF Value™ of ₹246.70.
GuruFocus considers Jainam Ferro Alloys (I) to be Modestly Undervalued.
Key valuation signals for NSE:JAINAM:
EV-to-EBIT: 19.97 (50% below median its 10-year median of 40.20)
GF Value™: ₹246.70 vs. price of ₹203.50 (17.5% below fair value)
Industry Position: 57.4% above the Steel median (#338 of 493)
No single metric tells the full story. See the NSE:JAINAM stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Jainam Ferro Alloys (I) Ltd is engaged in the manufacturing of two types of Ferro Alloys - Ferro Manganese and Silico manganese, largely used in the Steel industry. Ferro silicon, ferro silicon oxide, ferro silicon, ferro silicon, and ferro chrome are among the company's products. The company also generates revenue from trading activities of manganese ore, used as a raw material in the manufacturing of Ferro alloys. It sells products within India.
87GF Score
Get the complete analysis for NSE:JAINAM
EV-to-EBIT is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
NSE:JAINAM has been successfully added to your 
