Jainam Ferro Alloys (I)NSE:JAINAM 85 ROA % is 1.19% as of Mar. 2026, which is 82% below its 10-year median of 6.55. GuruFocus rates NSE:JAINAM with a GF Score™ of 85/100 and a GF Value™ of ₹237.63 (Fairly Valued). The stock has 5 warning signs investors should review. Among 635 Steel companies, Jainam Ferro Alloys (I) ranks better than 64.57% on this metric.
ROA % is calculated as Net Income divided by its average Total Assets over a certain period of time. Jainam Ferro Alloys (I)'s annualizedNet Income for the quarter that ended in Mar. 2026 was ₹23 Mil.
Jainam Ferro Alloys (I)'s average Total Assets over the quarter that ended in Mar. 2026 was ₹1,911 Mil. Therefore, Jainam Ferro Alloys (I)'s annualized ROA % for the quarter that ended in Mar. 2026 was 1.19%.
The historical rank and industry rank for Jainam Ferro Alloys (I)'s ROA % or its related term are showing as below:
NSE:JAINAM'
s ROA % Range Over the Past 10 Years
Min: 2.18 Med: 6.55 Max: 35.62
Current: 3.48
During the past 8 years, Jainam Ferro Alloys (I)'s highest ROA % was 35.62%. The lowest was 2.18%. And the median was 6.55%.
NSE:JAINAM's ROA % is ranked better than 64.57% of 635
companies
in the Steel industry
Industry Median: 1.88
vs NSE:JAINAM: 3.48
ROA % measures the rate of return on the total assets (shareholder equity plus liabilities). It measures a firm's efficiency at generating profits from shareholders' equity plus its liabilities. ROA % shows how well a company uses what it has to generate earnings. ROA %s can vary drastically across industries. Therefore, ROA % should not be used to compare companies in different industries. For retailers, a ROA % of higher than 5% is expected. For example, Wal-Mart (WMT) has a ROA % of about 8% as of 2012. For banks, ROA % is close to their interest spread. A banks ROA % is typically well under 2%.
Similar to ROE, ROA % is affected by profit margins and asset turnover. This can be seen from the Du Pont Formula:
Note:
The Net Income data used here is two times the semi-annual (Mar. 2026) net income data. The Revenue data used here is two times the semi-annual (Mar. 2026) revenue data.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Be Aware
Like ROE, ROA % is calculated with only 12 months data. Fluctuations in the company's earnings or business cycles can affect the ratio drastically. It is important to look at the ratio from a long term perspective. ROA % can be affected by events such as stock buyback or issuance, and by goodwill, a company's tax rate and its interest payment. ROA % may not reflect the true earning power of the assets. A more accurate measurement is ROC % (ROC).
Many analysts argue the higher return the better. Buffett states that really high ROA % may indicate vulnerability in the durability of the competitive advantage.
E.g. Raising $43b to take on KO is impossible, but $1.7b to take on Moody's is. Although Moody's ROA % and underlying economics is far superior to Coca Cola, the durability is far weaker because of lower entry cost.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Steel subindustry, Jainam Ferro Alloys (I)'s ROA %, along with its competitors' market caps and ROA % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Jainam Ferro Alloys (I) ROA % vs Steel Industry
For the Steel industry and Basic Materials sector, Jainam Ferro Alloys (I)'s ROA % distribution charts can be found below:
* The bar in red indicates where Jainam Ferro Alloys (I)'s ROA % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual ROA %, the net income of the last fiscal year and the average total assets over the fiscal year are used. In calculating the quarterly data,
the Net Income data used here is two times the semi-annual (Mar. 2026) net income data.
ROA % is displayed in the 30-year financial page.
Jainam Ferro Alloys (I) (NSE:JAINAM) has a ROA % of 1.19% as of Mar. 2026. Return on assets is the ratio of current-period net income to average two-period total assets. View historical data on Jainam Ferro Alloys (I) and its competitors. This is 82% below median its historical median of 6.55. Over the past decade, Jainam Ferro Alloys (I)'s ROA % has ranged from 2.18 to 35.62. According to the industry distribution chart, Jainam Ferro Alloys (I) ranks #225 out of 635 companies in the Steel industry, placing it in the top 35.4%.
Is Jainam Ferro Alloys (I)'s ROA % too high?
Jainam Ferro Alloys (I)'s current ROA % of 1.19% is 82% below median its 10-year median of 6.55. Over the past 10 years, this metric has ranged from a low of 2.18 to a high of 35.62. The Steel industry median ROA % is 1.88. Jainam Ferro Alloys (I)'s value of 1.19% is 36.7% below this industry median. Based on the distribution chart, Jainam Ferro Alloys (I) ranks #225 out of 635 companies in the Steel industry, which is above the industry midpoint. Overall, Jainam Ferro Alloys (I) has a GF Score™ of 85/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Jainam Ferro Alloys (I)'s ROA % compare to NUE and STLD?
According to the Steel industry distribution chart, Jainam Ferro Alloys (I) ranks #225 out of 635 companies for ROA %. This puts Jainam Ferro Alloys (I) in the upper half of its industry. The industry median ROA % is 1.88. Jainam Ferro Alloys (I)'s value of 1.19% is 36.7% below this benchmark. Historically, Jainam Ferro Alloys (I)'s own ROA % has ranged from 2.18 to 35.62 over the past decade. While the company's 10-year median is 6.55 vs. the industry median of 1.88, Jainam Ferro Alloys (I) has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good ROA % for a Steel company?
The median ROA % among Steel companies is 1.88, based on 635 companies in the industry. Companies in the top quartile (top 25%) have a ROA % significantly above this median, while those in the bottom quartile fall well below. However, ROA % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Jainam Ferro Alloys (I)'s current ROA % of 1.19% is 36.7% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high ROA % mean?
A high ROA % can signal that a stock is expensive relative to its fundamentals. Return on assets is the ratio of current-period net income to average two-period total assets. View historical data on Jainam Ferro Alloys (I) and its competitors. For the Steel industry, the median ROA % is 1.88 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Jainam Ferro Alloys (I)'s current ROA % is 1.19%, which is 82% below median its own 10-year median of 6.55. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Jainam Ferro Alloys (I) stock overvalued right now?
Based on GuruFocus' analysis, Jainam Ferro Alloys (I) (NSE:JAINAM) is currently considered Fairly Valued. The stock's GF Value™ is ₹237.63, compared to a current price of ₹255.00 — trading 7.3% above its estimated fair value. The current ROA % is 1.19%, which is 82% below median its 10-year median of 6.55 and 36.7% below the Steel industry median of 1.88. Jainam Ferro Alloys (I)'s overall GF Score™ is 85/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is ROA % calculated?
ROA % is calculated from a company's financial statements. For Jainam Ferro Alloys (I) (NSE:JAINAM), the current ROA % is 1.19% as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Jainam Ferro Alloys (I) (NSE:JAINAM) Overvalued in 2026?
Based on GuruFocus' analysis, Jainam Ferro Alloys (I) stock appears to be overvalued.
The current stock price of ₹255.00 is trading 7.3% above its estimated GF Value™ of ₹237.63.
GuruFocus considers Jainam Ferro Alloys (I) to be Fairly Valued.
Key valuation signals for NSE:JAINAM:
ROA %: 1.19% (82% below median its 10-year median of 6.55)
GF Value™: ₹237.63 vs. price of ₹255.00 (7.3% above fair value)
Industry Position: 36.7% below the Steel median (#225 of 635)
No single metric tells the full story. See the NSE:JAINAM stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Jainam Ferro Alloys (I) Ltd is engaged in the manufacturing of two types of Ferro Alloys - Ferro Manganese and Silico manganese, largely used in the Steel industry. Ferro silicon, ferro silicon oxide, ferro silicon, ferro silicon, and ferro chrome are among the company's products. The company also generates revenue from trading activities of manganese ore, used as a raw material in the manufacturing of Ferro alloys. It sells products within India.
85GF Score
Get the complete analysis for NSE:JAINAM
ROA % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
NSE:JAINAM has been successfully added to your 
