Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Jainam Ferro Alloys (I)NSE:JAINAM 86 PB Ratio is 1.89 as of Jul. 27, 2026, which is 6% below its 10-year median of 2.00. GuruFocus rates NSE:JAINAM with a GF Score™ of 86/100 and a GF Value™ of ₹241.48 (Fairly Valued). The stock has 5 warning signs investors should review. Among 610 Steel companies, Jainam Ferro Alloys (I) ranks worse than 76.39% on this metric.
The historical rank and industry rank for Jainam Ferro Alloys (I)'s PB Ratio or its related term are showing as below:
NSE:JAINAM'
s PB Ratio Range Over the Past 10 Years
Min: 1.28 Med: 2 Max: 8.22
Current: 1.89
During the past 8 years, Jainam Ferro Alloys (I)'s highest PB Ratio was 8.22. The lowest was 1.28. And the median was 2.00.
NSE:JAINAM's PB Ratio is ranked worse than 76.39% of 610
companies
in the Steel industry
Industry Median: 0.97
vs NSE:JAINAM: 1.89
During the past 12 months, Jainam Ferro Alloys (I)'s average Book Value Per Share Growth Rate was 0.30% per year.
During the past 3 years, the average Book Value Per Share Growth Rate was 15.10% per year.
During the past 5 years, the average Book Value Per Share Growth Rate was 37.00% per year.
During the past 8 years, the highest 3-Year average Book Value Per Share Growth Rate of Jainam Ferro Alloys (I) was 66.00% per year. The lowest was 15.10% per year. And the median was 47.90% per year.
Back to Basics: PB Ratio
Jainam Ferro Alloys (I) (NSE:JAINAM) PB Ratio Explanation
The PB Ratio works the best for the businesses that earn most of their profit from their assets, e.g. banks and insurance companies.
Be Aware
Some businesses have very light assets, such as software companies or insurance agencies. The PB Ratio does not work well for these companies. Some companies even have negative equity, so the PB Ratio cannot be applied to them.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Steel subindustry, Jainam Ferro Alloys (I)'s PB Ratio, along with its competitors' market caps and PB Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Jainam Ferro Alloys (I) PB Ratio vs Steel Industry
For the Steel industry and Basic Materials sector, Jainam Ferro Alloys (I)'s PB Ratio distribution charts can be found below:
* The bar in red indicates where Jainam Ferro Alloys (I)'s PB Ratio falls into.
The PB Ratio, or Price-to-Book ratio, or Price/Book, is a financial ratio used to compare a company's market price to its Book Value per Share. It is a ratio widely used to value stocks.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
It can also be calculated from the numbers for the whole company:
A closely related ratio is called Price-to-Tangible-Book. The difference between Price-to-Tangible-Book and PB Ratio is that book value other than intangibles are used in the calculation.
Jainam Ferro Alloys (I) (NSE:JAINAM) has a PB Ratio of 1.89 as of Jul. 27, 2026. Price-to-Book ratio is the ratio of share price to a company's book value per share. View historical data on Jainam Ferro Alloys (I) and its competitors. This is near median its historical median of 2.00. Over the past decade, Jainam Ferro Alloys (I)'s PB Ratio has ranged from 1.28 to 8.22. According to the industry distribution chart, Jainam Ferro Alloys (I) ranks #466 out of 610 companies in the Steel industry, placing it in the top 76.4%.
Is Jainam Ferro Alloys (I)'s PB Ratio too high?
Jainam Ferro Alloys (I)'s current PB Ratio of 1.89 is near median its 10-year median of 2.00. Over the past 10 years, this metric has ranged from a low of 1.28 to a high of 8.22. The Steel industry median PB Ratio is 0.97. Jainam Ferro Alloys (I)'s value of 1.89 is 94.8% above this industry median. Based on the distribution chart, Jainam Ferro Alloys (I) ranks #466 out of 610 companies in the Steel industry, which is in the bottom quartile relative to peers. Overall, Jainam Ferro Alloys (I) has a GF Score™ of 86/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Jainam Ferro Alloys (I)'s PB Ratio compare to NUE and STLD?
According to the Steel industry distribution chart, Jainam Ferro Alloys (I) ranks #466 out of 610 companies for PB Ratio. This places Jainam Ferro Alloys (I) in the lower half of its industry. The industry median PB Ratio is 0.97. Jainam Ferro Alloys (I)'s value of 1.89 is 94.8% above this benchmark. Historically, Jainam Ferro Alloys (I)'s own PB Ratio has ranged from 1.28 to 8.22 over the past decade. While the company's 10-year median is 2.00 vs. the industry median of 0.97, Jainam Ferro Alloys (I) has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PB Ratio for a Steel company?
The median PB Ratio among Steel companies is 0.97, based on 610 companies in the industry. Companies in the top quartile (top 25%) have a PB Ratio significantly above this median, while those in the bottom quartile fall well below. However, PB Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Jainam Ferro Alloys (I)'s current PB Ratio of 1.89 is 94.8% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PB Ratio mean?
A high PB Ratio can signal that a stock is expensive relative to its fundamentals. Price-to-Book ratio is the ratio of share price to a company's book value per share. View historical data on Jainam Ferro Alloys (I) and its competitors. For the Steel industry, the median PB Ratio is 0.97 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Jainam Ferro Alloys (I)'s current PB Ratio is 1.89, which is near median its own 10-year median of 2.00. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Jainam Ferro Alloys (I) stock overvalued right now?
Based on GuruFocus' analysis, Jainam Ferro Alloys (I) (NSE:JAINAM) is currently considered Fairly Valued. The stock's GF Value™ is ₹241.48, compared to a current price of ₹235.00 — trading 2.7% below its estimated fair value. The current PB Ratio is 1.89, which is near median its 10-year median of 2.00 and 94.8% above the Steel industry median of 0.97. Jainam Ferro Alloys (I)'s overall GF Score™ is 86/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PB Ratio calculated?
PB Ratio is calculated from a company's financial statements. For Jainam Ferro Alloys (I) (NSE:JAINAM), the current PB Ratio is 1.89 as of Jul. 27, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Jainam Ferro Alloys (I) (NSE:JAINAM) Overvalued in 2026?
Based on GuruFocus' analysis, Jainam Ferro Alloys (I) stock appears to be undervalued.
The current stock price of ₹235.00 is trading 2.7% below its estimated GF Value™ of ₹241.48.
GuruFocus considers Jainam Ferro Alloys (I) to be Fairly Valued.
Key valuation signals for NSE:JAINAM:
PB Ratio: 1.89 (near median its 10-year median of 2.00)
GF Value™: ₹241.48 vs. price of ₹235.00 (2.7% below fair value)
Industry Position: 94.8% above the Steel median (#466 of 610)
No single metric tells the full story. See the NSE:JAINAM stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Jainam Ferro Alloys (I) Ltd is engaged in the manufacturing of two types of Ferro Alloys - Ferro Manganese and Silico manganese, largely used in the Steel industry. Ferro silicon, ferro silicon oxide, ferro silicon, ferro silicon, and ferro chrome are among the company's products. The company also generates revenue from trading activities of manganese ore, used as a raw material in the manufacturing of Ferro alloys. It sells products within India.
86GF Score
Get the complete analysis for NSE:JAINAM
PB Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
NSE:JAINAM has been successfully added to your 
