Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
EV-to-FCF is calculated as enterprise value divided by its free cash flow. As of today, Gallant Micro Machining Co's Enterprise Value is NT$30,216 Mil.
Gallant Micro Machining Co's Free Cash Flow for the trailing twelve months (TTM) ended in Dec. 2025 was NT$-11 Mil. Therefore, Gallant Micro Machining Co's EV-to-FCF for today is -2,685.11.
The historical rank and industry rank for Gallant Micro Machining Co's EV-to-FCF or its related term are showing as below:
ROCO:6640'
s EV-to-FCF Range Over the Past 10 Years
Min: -4221.11 Med: 13.01 Max: 2391.76
Current: -2557.68
During the past 13 years, the highest EV-to-FCF of Gallant Micro Machining Co was 2391.76. The lowest was -4221.11. And the median was 13.01.
ROCO:6640's EV-to-FCF is ranked worse than 100% of 503
companies
in the Semiconductors industry
Industry Median: 46.13
vs ROCO:6640: -2557.68
EV-to-FCF is a valuation multiple that allows analysts and investors to compare stocks, preferably in the same sector or industry. This important multiple is often used in conjunction with, or as an alternative to, the PE Ratio (TTM) to determine the fair market value of a company.
Gallant Micro Machining Co (ROCO:6640) EV-to-FCF Explanation
EV-to-FCF is a valuation multiple that allows analysts and investors to compare stocks, preferably in the same sector or industry. This important multiple is often used in conjunction with, or as an alternative to, the PE Ratio (TTM) to determine the fair market value of a company.
Gallant Micro Machining Co's PE Ratio (TTM) for today is calculated as:
Gallant Micro Machining Co's share price for today is NT$1030.00.
Gallant Micro Machining Co's Earnings per Share (Diluted) for the trailing twelve months (TTM) ended in Dec. 2025 adds up the quarterly data reported by the company within the most recent 12 months, which was NT$12.270.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Enterprise Value is used because it is a more complete measure in reflecting how much an investor pays when buying a company. Free Cash Flow is an important financial metric because it represents the actual amount of cash at a company's disposal. Companies with a low EV-to-FCF ratio, combined with a strong balance sheet are generally considered as undervalued.
Gallant Micro Machining Co EV-to-FCF Related Terms
Gallant Micro Machining Co EV-to-FCF Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
ROCO:6640 vs AMAT, LRCX, KLAC: EV-to-FCF Comparison
For the Semiconductor Equipment & Materials subindustry, Gallant Micro Machining Co's EV-to-FCF, along with its competitors' market caps and EV-to-FCF data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Gallant Micro Machining Co EV-to-FCF vs Semiconductors Industry
For the Semiconductors industry and Technology sector, Gallant Micro Machining Co's EV-to-FCF distribution charts can be found below:
* The bar in red indicates where Gallant Micro Machining Co's EV-to-FCF falls into.
Gallant Micro Machining Co's current Enterprise Value is NT$30,216 Mil.
Gallant Micro Machining Co's Free Cash Flow for the trailing twelve months (TTM) ended in Dec. 2025 adds up the quarterly data reported by the company within the most recent 12 months, which was NT$-11 Mil.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Gallant Micro Machining Co (ROCO:6640) has a EV-to-FCF of -2,685.11 as of Jul. 16, 2026. EV to FCF ratio is the company's enterprise value divided by free cash flow. View historical data on Gallant Micro Machining Co and its competitors. According to the industry distribution chart, Gallant Micro Machining Co ranks #999999 out of 503 companies in the Semiconductors industry.
Is Gallant Micro Machining Co's EV-to-FCF too high?
Gallant Micro Machining Co's current EV-to-FCF is -2,685.11. Based on the distribution chart, Gallant Micro Machining Co ranks #999999 out of 503 companies in the Semiconductors industry, which is in the bottom quartile relative to peers. Overall, Gallant Micro Machining Co has a GF Score™ of 86/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Gallant Micro Machining Co's EV-to-FCF compare to AMAT and LRCX?
According to the Semiconductors industry distribution chart, Gallant Micro Machining Co ranks #999999 out of 503 companies for EV-to-FCF. This places Gallant Micro Machining Co in the lower half of its industry. The industry median EV-to-FCF is 46.13. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EV-to-FCF for a Semiconductors company?
The median EV-to-FCF among Semiconductors companies is 46.13, based on 503 companies in the industry. Companies in the top quartile (top 25%) have a EV-to-FCF significantly above this median, while those in the bottom quartile fall well below. However, EV-to-FCF should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EV-to-FCF mean?
A high EV-to-FCF can signal that a stock is expensive relative to its fundamentals. EV to FCF ratio is the company's enterprise value divided by free cash flow. View historical data on Gallant Micro Machining Co and its competitors. For the Semiconductors industry, the median EV-to-FCF is 46.13 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Gallant Micro Machining Co's current EV-to-FCF is -2,685.11. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Gallant Micro Machining Co stock overvalued right now?
Based on GuruFocus' analysis, Gallant Micro Machining Co (ROCO:6640) is currently considered Significantly Overvalued. The stock's GF Value™ is NT$767.92, compared to a current price of NT$1,030.00 — trading 34.1% above its estimated fair value. The current EV-to-FCF is -2,685.11. Gallant Micro Machining Co's overall GF Score™ is 86/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EV-to-FCF calculated?
EV-to-FCF is calculated from a company's financial statements. For Gallant Micro Machining Co (ROCO:6640), the current EV-to-FCF is -2,685.11 as of Jul. 16, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Gallant Micro Machining Co (ROCO:6640) Overvalued in 2026?
Based on GuruFocus' analysis, Gallant Micro Machining Co stock appears to be overvalued.
The current stock price of NT$1,030.00 is trading 34.1% above its estimated GF Value™ of NT$767.92.
GuruFocus considers Gallant Micro Machining Co to be Significantly Overvalued.
Key valuation signals for ROCO:6640:
EV-to-FCF: -2,685.11
GF Value™: NT$767.92 vs. price of NT$1,030.00 (34.1% above fair value)
No single metric tells the full story. See the ROCO:6640 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Gallant Micro Machining Co Ltd is a Taiwan based system supplier for electronics and semiconductors. The business of the company is the production and sales of machinery and equipment, precision molds and other parts and components. The company operates in Taiwan, China and other regions.
86GF Score
Get the complete analysis for ROCO:6640
EV-to-FCF is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ROCO:6640 has been successfully added to your 
