Episil Precision (TPE:3016) Piotroski F-Score: 5 (As of Jun. 28, 2026) — Near Median


TPE:3016 Episil Precision Inc TPE:3016
59 GF Score
Price NT$124.50
GF Value NT$54.48
Valuation Significantly Overvalued
! 10 Warning Signs
View Full Analysis

What is Episil Precision Piotroski F-Score?

Episil Precision TPE:3016 -6.74% 59 Piotroski F-Score is 5 as of Jun. 28, 2026, which is at its 10-year median of 5.00. GuruFocus rates TPE:3016 with a GF Score™ of 59/100 and a GF Value™ of NT$54.48 (Significantly Overvalued). The stock has 10 warning signs investors should review. Among 989 Semiconductors companies, Episil Precision ranks better than 61.17% on this metric.

The zones of discrimination were as such:

Good or high score = 7, 8, 9
Bad or low score = 0, 1, 2, 3

Episil Precision has an F-score of 5 indicating the company's financial situation is typical for a stable company.

The historical rank and industry rank for Episil Precision's Piotroski F-Score or its related term are showing as below:

TPE:3016' s Piotroski F-Score Range Over the Past 10 Years
Min: 5   Med: 5   Max: 7
Current: 5

During the past 13 years, the highest Piotroski F-Score of Episil Precision was 7. The lowest was 5. And the median was 5.

Episil Precision  (TPE:3016) Piotroski F-Score Explanation

The developer of the system is Joseph D. Piotroski is relatively unknown accounting professor who shuns publicity and rarely gives interviews.

He graduated from the University of Illinois with a B.S. in accounting in 1989, received an M.B.A. from Indiana University in 1994. Five years later, in 1999, after earning a Ph.D. in accounting from the University of Michigan, he became an associate professor of accounting at the University of Chicago.

In 2000, he wrote a research paper called "Value Investing: The Use of Historical Financial Statement Information to Separate Winners from Losers" (pdf).

He wanted to see if he can develop a system (using a simple nine-point scoring system) that can increase the returns of a strategy of investing in low price to book (referred to in the paper as high book to market) value companies.

What he found was something that exceeded his most optimistic expectations.

Buying only those companies that scored highest (8 or 9) on his nine-point scale, or F-Score as he called it, over the 20 year period from 1976 to 1996 led to an average out-performance over the market of 13.4%.

Even more impressive were the results of a strategy of investing in the highest F-Score companies (8 or 9) and shorting companies with the lowest F-Score (0 or 1).

Over the same period from 1976 to 1996 (20 years) this strategy led to an average yearly return of 23%, substantially outperforming the average S&P 500 index return of 15.83% over the same period.


Episil Precision Piotroski F-Score Related Terms


Episil Precision Piotroski F-Score Historical Data

* Premium members only.

The historical data trend for Episil Precision's Piotroski F-Score can be seen below:

* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD.
* For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.

Episil Precision Piotroski F-Score Chart

Episil Precision Annual Data
Trend Dec16 Dec17 Dec18 Dec19 Dec20 Dec21 Dec22 Dec23 Dec24 Dec25
Piotroski F-Score
Get a 7-Day Free Trial Premium Member Only Premium Member Only 7.00 7.00 5.00 5.00 5.00

Episil Precision Quarterly Data
Mar21 Jun21 Sep21 Dec21 Mar22 Jun22 Sep22 Dec22 Mar23 Jun23 Sep23 Dec23 Mar24 Jun24 Sep24 Dec24 Mar25 Jun25 Sep25 Dec25
Piotroski F-Score Get a 7-Day Free Trial Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only 5.00 6.00 5.00 6.00 5.00

TPE:3016 vs LRCX, AMAT, KLAC: Piotroski F-Score Comparison

For the Semiconductor Equipment & Materials subindustry, Episil Precision's Piotroski F-Score, along with its competitors' market caps and Piotroski F-Score data, can be viewed below:

* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.


Episil Precision Piotroski F-Score vs Semiconductors Industry

For the Semiconductors industry and Technology sector, Episil Precision's Piotroski F-Score distribution charts can be found below:

* The bar in red indicates where Episil Precision's Piotroski F-Score falls into.


TPE:3016
59GF Score
Episil Precision Inc TPE:3016
Piotroski F-Score is just one metric. See GF Score™, valuation, warning signs, and more.
View Full Analysis

How is the Piotroski F-Score calculated?

* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD.
* For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.

This Year (Dec25) TTM:Last Year (Dec24) TTM:
Net Income was 2.834 + -42.652 + 13.756 + 46.478 = NT$20 Mil.
Cash Flow from Operations was 130.527 + 68.773 + 93.621 + 199.559 = NT$492 Mil.
Revenue was 897.024 + 954.636 + 975.24 + 1064.798 = NT$3,892 Mil.
Gross Profit was 56.634 + 48.104 + 75.966 + 125.791 = NT$306 Mil.
Average Total Assets from the begining of this year (Dec24)
to the end of this year (Dec25) was
(7411.215 + 7220.4 + 6801.049 + 6716.456 + 6903.047) / 5 = NT$7010.4334 Mil.
Total Assets at the begining of this year (Dec24) was NT$7,411 Mil.
Long-Term Debt & Capital Lease Obligation was NT$819 Mil.
Total Current Assets was NT$3,891 Mil.
Total Current Liabilities was NT$1,047 Mil.
Net Income was 40.637 + 149.927 + 45.5 + 28.544 = NT$265 Mil.

Revenue was 1030.06 + 1047.959 + 1054.584 + 974.867 = NT$4,107 Mil.
Gross Profit was 118.897 + 83.203 + 107.186 + 72.719 = NT$382 Mil.
Average Total Assets from the begining of last year (Dec23)
to the end of last year (Dec24) was
(6811.986 + 6970.54 + 7030.63 + 7814.033 + 7411.215) / 5 = NT$7207.6808 Mil.
Total Assets at the begining of last year (Dec23) was NT$6,812 Mil.
Long-Term Debt & Capital Lease Obligation was NT$830 Mil.
Total Current Assets was NT$4,424 Mil.
Total Current Liabilities was NT$1,411 Mil.

*Note: If the latest quarterly/semi-annual/annual total assets data is 0, then we will use previous quarterly/semi-annual/annual data for all the items in the balance sheet.

Profitability

Question 1. Return on Assets (ROA)

Net income before extraordinary items for the year divided by Total Assets at the beginning of the year.

Score 1 if positive, 0 if negative.

Episil Precision's current Net Income (TTM) was 20. ==> Positive ==> Score 1.

Question 2. Cash Flow Return on Assets (CFROA)

Net cash flow from operating activities (operating cash flow) divided by Total Assets at the beginning of the year.

Score 1 if positive, 0 if negative.

Episil Precision's current Cash Flow from Operations (TTM) was 492. ==> Positive ==> Score 1.

Question 3. Change in Return on Assets

Compare this year's return on assets (1) to last year's return on assets.

Score 1 if it's higher, 0 if it's lower.

ROA (This Year)=Net Income/Total Assets (Dec24)
=20.416/7411.215
=0.00275474

ROA (Last Year)=Net Income/Total Assets (Dec23)
=264.608/6811.986
=0.03884447

Episil Precision's return on assets of this year was 0.00275474. Episil Precision's return on assets of last year was 0.03884447. ==> Last year is higher ==> Score 0.

Question 4. Quality of Earnings (Accrual)

Compare Cash flow return on assets (2) to return on assets (1)

Score 1 if CFROA > ROA, 0 if CFROA <= ROA.

Episil Precision's current Net Income (TTM) was 20. Episil Precision's current Cash Flow from Operations (TTM) was 492. ==> 492 > 20 ==> CFROA > ROA ==> Score 1.

Funding

Question 5. Change in Gearing or Leverage

Compare this year's gearing (long-term debt divided by average total assets) to last year's gearing.

Score 0 if this year's gearing is higher, 1 otherwise.

Gearing (This Year: Dec25)=Long-Term Debt & Capital Lease Obligation/Average Total Assets from Dec24 to Dec25
=819.429/7010.4334
=0.11688707

Gearing (Last Year: Dec24)=Long-Term Debt & Capital Lease Obligation/Average Total Assets from Dec23 to Dec24
=829.807/7207.6808
=0.11512816

Episil Precision's gearing of this year was 0.11688707. Episil Precision's gearing of last year was 0.11512816. ==> Last year is lower than this year ==> Score 0.

Question 6. Change in Working Capital (Liquidity)

Compare this year's current ratio (current assets divided by current liabilities) to last year's current ratio.

Score 1 if this year's current ratio is higher, 0 if it's lower

Current Ratio (This Year: Dec25)=Total Current Assets/Total Current Liabilities
=3891.214/1046.902
=3.71688467

Current Ratio (Last Year: Dec24)=Total Current Assets/Total Current Liabilities
=4424.395/1411.418
=3.13471629

Episil Precision's current ratio of this year was 3.71688467. Episil Precision's current ratio of last year was 3.13471629. ==> This year's current ratio is higher. ==> Score 1.

Question 7. Change in Shares in Issue

Compare the number of shares in issue this year, to the number in issue last year.

Score 0 if there is larger number of shares in issue this year, 1 otherwise.

Episil Precision's number of shares in issue this year was 289.166. Episil Precision's number of shares in issue last year was 289.623. ==> There is smaller number of shares in issue this year, or the same. ==> Score 1.

Efficiency

Question 8. Change in Gross Margin

Compare this year's gross margin (Gross Profit divided by sales) to last year's.

Score 1 if this year's gross margin is higher, 0 if it's lower.

Gross Margin (This Year: TTM)=Gross Profit/Revenue
=306.495/3891.698
=0.07875611

Gross Margin (Last Year: TTM)=Gross Profit/Revenue
=382.005/4107.47
=0.09300251

Episil Precision's gross margin of this year was 0.07875611. Episil Precision's gross margin of last year was 0.09300251. ==> Last year's gross margin is higher ==> Score 0.

Question 9. Change in asset turnover

Compare this year's asset turnover (total sales for the year divided by total assets at the beginning of the year) to last year's asset turnover ratio.

Score 1 if this year's asset turnover ratio is higher, 0 if it's lower

Asset Turnover (This Year)=Revenue/Total Assets at the Beginning of This Year (Dec24)
=3891.698/7411.215
=0.52510931

Asset Turnover (Last Year)=Revenue/Total Assets at the Beginning of Last Year (Dec23)
=4107.47/6811.986
=0.60297687

Episil Precision's asset turnover of this year was 0.52510931. Episil Precision's asset turnover of last year was 0.60297687. ==> Last year's asset turnover is higher ==> Score 0.

Evaluation

Piotroski F-Score= Que. 1+ Que. 2+ Que. 3+Que. 4+Que. 5+Que. 6+Que. 7+Que. 8+Que. 9
=1+1+0+1+0+1+1+0+0
=5

Good or high score = 7, 8, 9
Bad or low score = 0, 1, 2, 3

Episil Precision has an F-score of 5 indicating the company's financial situation is typical for a stable company.

Frequently Asked Questions Learn more about Piotroski F-Score →
What does a Piotroski F-Score of 5 mean?
Episil Precision (TPE:3016) has a Piotroski F-Score of 5 as of Jun. 28, 2026. The Piotroski F-score grades a company's business operating strength from 0-9. View historical data on Episil Precision and its competitors. This is near median its historical median of 5.00. Over the past decade, Episil Precision's Piotroski F-Score has ranged from 5.00 to 7.00. According to the industry distribution chart, Episil Precision ranks #384 out of 989 companies in the Semiconductors industry, placing it in the top 38.8%.
Is Episil Precision's Piotroski F-Score too high?
Episil Precision's current Piotroski F-Score of 5 is near median its 10-year median of 5.00. Over the past 10 years, this metric has ranged from a low of 5.00 to a high of 7.00. The Semiconductors industry median Piotroski F-Score is 5.00. Episil Precision's value of 5 is 0% at this industry median. Based on the distribution chart, Episil Precision ranks #384 out of 989 companies in the Semiconductors industry, which is above the industry midpoint. Overall, Episil Precision has a GF Score™ of 59/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Episil Precision's Piotroski F-Score compare to LRCX and AMAT?
According to the Semiconductors industry distribution chart, Episil Precision ranks #384 out of 989 companies for Piotroski F-Score. This puts Episil Precision in the upper half of its industry. The industry median Piotroski F-Score is 5.00. Episil Precision's value of 5 is 0% at this benchmark. Historically, Episil Precision's own Piotroski F-Score has ranged from 5.00 to 7.00 over the past decade. While the company's 10-year median is 5.00 vs. the industry median of 5.00, Episil Precision has consistently been at the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Piotroski F-Score for a Semiconductors company?
The median Piotroski F-Score among Semiconductors companies is 5.00, based on 989 companies in the industry. Companies in the top quartile (top 25%) have a Piotroski F-Score significantly above this median, while those in the bottom quartile fall well below. However, Piotroski F-Score should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Episil Precision's current Piotroski F-Score of 5 is 0% at the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Piotroski F-Score mean?
A high Piotroski F-Score can signal that a stock is expensive relative to its fundamentals. The Piotroski F-score grades a company's business operating strength from 0-9. View historical data on Episil Precision and its competitors. For the Semiconductors industry, the median Piotroski F-Score is 5.00 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Episil Precision's current Piotroski F-Score is 5, which is near median its own 10-year median of 5.00. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Episil Precision stock overvalued right now?
Based on GuruFocus' analysis, Episil Precision (TPE:3016) is currently considered Significantly Overvalued. The stock's GF Value™ is NT$54.48, compared to a current price of NT$124.50 — trading 128.5% above its estimated fair value. The current Piotroski F-Score is 5, which is near median its 10-year median of 5.00 and 0% at the Semiconductors industry median of 5.00. Episil Precision's overall GF Score™ is 59/100 with 10 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Piotroski F-Score calculated?
Piotroski F-Score is calculated from a company's financial statements. For Episil Precision (TPE:3016), the current Piotroski F-Score is 5 as of Jun. 28, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.

Is Episil Precision (TPE:3016) Overvalued in 2026?

Based on GuruFocus' analysis, Episil Precision stock appears to be overvalued. The current stock price of NT$124.50 is trading 128.5% above its estimated GF Value™ of NT$54.48. GuruFocus considers Episil Precision to be Significantly Overvalued.

Key valuation signals for TPE:3016:

  • Piotroski F-Score: 5 (near median its 10-year median of 5.00)
  • GF Value™: NT$54.48 vs. price of NT$124.50 (128.5% above fair value)
  • GF Score™: 59/100 with 10 warning signs
  • Industry Position: 0% at the Semiconductors median (#384 of 989)

No single metric tells the full story. See the TPE:3016 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.


Episil Precision Business Description

Address No. 10, Duxing 1st Road, Hsinchu Science Park, Hsinchu, TWN, 30078
Episil Precision Inc is engaged in the development, manufacturing, and sale of silicon epitaxy wafers and compound semiconductor epitaxial wafers. Its product range includes silicon epitaxy, SiC/SiC Epitaxy, and GaN/Si Epitaxy.
59GF Score

Get the complete analysis for TPE:3016

Piotroski F-Score is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.

NT$124.50
Price
NT$54.48
GF Value