Massivit 3D Printing TechnologiesXTAE:MSVT -4.71%61 Net Current Asset Value is ₪0.34 as of Dec. 2025, which is 100% below its 10-year median of 1.96. GuruFocus rates XTAE:MSVT with a GF Score™ of 61/100 and a GF Value™ of ₪1.07 (Modestly Undervalued). The stock has 5 warning signs investors should review. Among 1,844 Hardware companies, Massivit 3D Printing Technologies ranks better than 73.21% on this metric.
In calculating the Net Current Asset Value (NCAV), Benjamin Graham means a company's current assets (such as cash, marketable securities, and inventories) minus its total liabilities (including preferred stock, minority interest, and long-term debt).
The historical rank and industry rank for Massivit 3D Printing Technologies's Net Current Asset Value or its related term are showing as below:
XTAE:MSVT'
s Price-to-Net-Current-Asset-Value Range Over the Past 10 Years
Min: 1.34 Med: 1.96 Max: 2.95
Current: 2.5
During the past 6 years, the highest Price-to-Net-Current-Asset-Value Ratio of Massivit 3D Printing Technologies was 2.95. The lowest was 1.34. And the median was 1.96.
XTAE:MSVT's Price-to-Net-Current-Asset-Value is ranked better than 73.21% of 1844
companies
in the Hardware industry
Industry Median: 5.3
vs XTAE:MSVT: 2.50
Massivit 3D Printing Technologies (XTAE:MSVT) Net Current Asset Value Explanation
Benjamin Graham first discussed net current asset value (NCAV) in the 1934 edition of "Security Analysis", which he coauthored with David Dodd. In the book, (net) current asset value is defined as:" current assets alone, minus all liabilities and claims ahead of the issue."
The common definition of NCAV is: NCAV = current assets – [total liabilities + minority interest + preferred stock]
Net current assets exclude not only the intangible assets but also the fixed and miscellaneous assets. In addition, Graham believed that preferred stock belongs on the liability side of the balance sheet, not as part of capital and surplus. In "Security Analysis", preferred stock is dubbed "an imperfect creditorship position" that is best placed on the balance sheet alongside funded debt.
One research study, covering the years 1970 through 1983 showed that portfolios picked at the beginning of each year, and held for one year, returned 29.4 percent, on average, over the 13-year period, compared to 11.5 percent for the S&P 500 Index. Other studies of Grahams strategy produced similar results.
Benjamin Graham looked for companies whose market values were less than two-thirds of their Net-Net Working Capital. They are collected under our Net-Net screener.
Massivit 3D Printing Technologies Net Current Asset Value Related Terms
Massivit 3D Printing Technologies Net Current Asset Value Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Massivit 3D Printing Technologies Net Current Asset Value Chart
XTAE:MSVT vs SNDK, DELL, STX: Net Current Asset Value Comparison
For the Computer Hardware subindustry, Massivit 3D Printing Technologies's Price-to-Net-Current-Asset-Value, along with its competitors' market caps and Price-to-Net-Current-Asset-Value data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Massivit 3D Printing Technologies Price-to-Net-Current-Asset-Value vs Hardware Industry
For the Hardware industry and Technology sector, Massivit 3D Printing Technologies's Price-to-Net-Current-Asset-Value distribution charts can be found below:
* The bar in red indicates where Massivit 3D Printing Technologies's Price-to-Net-Current-Asset-Value falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
What does a Net Current Asset Value of ₪0.34 mean?
Massivit 3D Printing Technologies (XTAE:MSVT) has a Net Current Asset Value of ₪0.34 as of Dec. 2025. Ben Graham's net current asset value equals the per-share value of total current assets less total liabilities. View historical data on Massivit 3D Printing Technologies and its competitors. This is 83% below median its historical median of 1.96. Over the past decade, Massivit 3D Printing Technologies' Net Current Asset Value has ranged from 1.34 to 2.95. According to the industry distribution chart, Massivit 3D Printing Technologies ranks #494 out of 1844 companies in the Hardware industry, placing it in the top 26.8%.
Is Massivit 3D Printing Technologies' Net Current Asset Value too high?
Massivit 3D Printing Technologies' current Net Current Asset Value of ₪0.34 is 83% below median its 10-year median of 1.96. Over the past 10 years, this metric has ranged from a low of 1.34 to a high of 2.95. Based on the distribution chart, Massivit 3D Printing Technologies ranks #494 out of 1844 companies in the Hardware industry, which is above the industry midpoint. Overall, Massivit 3D Printing Technologies has a GF Score™ of 61/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Massivit 3D Printing Technologies' Net Current Asset Value compare to SNDK and DELL?
According to the Hardware industry distribution chart, Massivit 3D Printing Technologies ranks #494 out of 1844 companies for Net Current Asset Value. This puts Massivit 3D Printing Technologies in the upper half of its industry. The industry median Net Current Asset Value is 5.30. Historically, Massivit 3D Printing Technologies' own Net Current Asset Value has ranged from 1.34 to 2.95 over the past decade. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Net Current Asset Value for a Hardware company?
The median Net Current Asset Value among Hardware companies is 5.30, based on 1,844 companies in the industry. Companies in the top quartile (top 25%) have a Net Current Asset Value significantly above this median, while those in the bottom quartile fall well below. However, Net Current Asset Value should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Net Current Asset Value mean?
A high Net Current Asset Value can signal that a stock is expensive relative to its fundamentals. Ben Graham's net current asset value equals the per-share value of total current assets less total liabilities. View historical data on Massivit 3D Printing Technologies and its competitors. For the Hardware industry, the median Net Current Asset Value is 5.30 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Massivit 3D Printing Technologies's current Net Current Asset Value is ₪0.34, which is 83% below median its own 10-year median of 1.96. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Massivit 3D Printing Technologies stock overvalued right now?
Based on GuruFocus' analysis, Massivit 3D Printing Technologies (XTAE:MSVT) is currently considered Modestly Undervalued. The stock's GF Value™ is ₪1.07, compared to a current price of ₪0.85 — trading 20.6% below its estimated fair value. The current Net Current Asset Value is ₪0.34, which is 83% below median its 10-year median of 1.96. Massivit 3D Printing Technologies' overall GF Score™ is 61/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Net Current Asset Value calculated?
Net Current Asset Value is calculated from a company's financial statements. For Massivit 3D Printing Technologies (XTAE:MSVT), the current Net Current Asset Value is ₪0.34 as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Massivit 3D Printing Technologies (XTAE:MSVT) Overvalued in 2026?
Based on GuruFocus' analysis, Massivit 3D Printing Technologies stock appears to be undervalued.
The current stock price of ₪0.85 is trading 20.6% below its estimated GF Value™ of ₪1.07.
GuruFocus considers Massivit 3D Printing Technologies to be Modestly Undervalued.
Key valuation signals for XTAE:MSVT:
Net Current Asset Value: ₪0.34 (83% below median its 10-year median of 1.96)
GF Value™: ₪1.07 vs. price of ₪0.85 (20.6% below fair value)
No single metric tells the full story. See the XTAE:MSVT stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Massivit 3D Printing Technologies Business Description
Massivit 3D Printing Technologies Ltd is engaged in providing 3D printing solutions for the Engineering, Visual Communications, Entertainment, Academia, Interior Design, and Architectural markets.
61GF Score
Get the complete analysis for XTAE:MSVT
Net Current Asset Value is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
XTAE:MSVT has been successfully added to your 
