As of today (2026-07-09), Massivit 3D Printing Technologies's weighted average cost of capital is 17.16%%. Massivit 3D Printing Technologies's ROIC % is -222.45% (calculated using TTM income statement data).
Massivit 3D Printing Technologies earns returns that do not match up to its cost of capital. It will destroy value as it grows.
For a comprehensive WACC calculation, please access the WACC Calculator.
Massivit 3D Printing Technologies (XTAE:MSVT) WACC % Explanation
Because it costs money to raise capital. A firm that generates higher ROIC % than it costs the company to raise the capital needed for that investment is earning excess returns. A firm that expects to continue generating positive excess returns on new investments in the future will see its value increase as growth increases, whereas a firm that earns returns that do not match up to its cost of capital will destroy value as it grows.
As of today, Massivit 3D Printing Technologies's weighted average cost of capital is 17.16%%. Massivit 3D Printing Technologies's ROIC % is -222.45% (calculated using TTM income statement data).
Massivit 3D Printing Technologies earns returns that do not match up to its cost of capital. It will destroy value as it grows.
Be Aware
1. GuruFocus uses book value of debt (D) to do the calculation. It is simplified by adding latest one-year semi-annual average Short-Term Debt & Capital Lease Obligation and Long-Term Debt & Capital Lease Obligation together.
For companies that report quarterly, GuruFocus combines all of the most recent year's quarterly debt data from the beginning of the year to the year-end and calculates the average.
For companies that report semi-annually, GuruFocus combines all of the most recent year's semi-annual debt data from the start of the year to the year-end and calculates the average.
For companies that report annually, GuruFocus combines the beginning and ending annual debt data from the most recent year and then calculates the average.
2. The WACC formula discussed above does not include Preferred Stock. Please adjust if preferred stock is considered.
3. (Expected Return of the Market - Risk-Free Rate of Return) is also called market premium. GuruFocus requires market premium to be 6%.
4. GuruFocus uses the latest TTM Interest Expense divided by the latest one-year semi-annual average debt to get the simplified cost of debt.
Related Terms
Massivit 3D Printing Technologies WACC % Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Computer Hardware subindustry, Massivit 3D Printing Technologies's WACC %, along with its competitors' market caps and WACC % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Massivit 3D Printing Technologies WACC % vs Hardware Industry
Massivit 3D Printing Technologies WACC % Calculation
The weighted average cost of capital (WACC) is the rate that a company is expected to pay on average to all its security holders to finance its assets. The WACC is commonly referred to as the firm's cost of capital. Generally speaking, a company's assets are financed by debt and equity. WACC is the average of the costs of these sources of financing, each of which is weighted by its respective use in the given situation. By taking a weighted average, we can see how much interest the company has to pay for every dollar it finances.
WACC
=
E
/
(E + D)
*
Cost of Equity
+
D
/
(E + D)
*
Cost of Debt
*
(1 - Tax Rate)
1. Weights:
Generally speaking, a company's assets are financed by debt and equity. We need to calculate the weight of equity and the weight of debt.
The market value of equity (E) is also called "Market Cap". As of today, Massivit 3D Printing Technologies's market capitalization (E) is ₪31.448 Mil.
The market value of debt is typically difficult to calculate, therefore, GuruFocus uses book value of debt (D) to do the calculation. It is simplified by adding the latest one-year semi-annual average Short-Term Debt & Capital Lease Obligation and Long-Term Debt & Capital Lease Obligation together. As of Dec. 2025, Massivit 3D Printing Technologies's latest one-year semi-annual average Book Value of Debt (D) is ₪1.4007 Mil.
a) weight of equity = E / (E + D) = 31.448 / (31.448 + 1.4007) = 0.9574
b) weight of debt = D / (E + D) = 1.4007 / (31.448 + 1.4007) = 0.0426
2. Cost of Equity:
GuruFocus uses Capital Asset Pricing Model (CAPM) to calculate the required rate of return. The formula is:
Cost of Equity = Risk-Free Rate of Return + Beta of Asset * (Expected Return of the Market - Risk-Free Rate of Return)
a) GuruFocus uses 10-Year Treasury Constant Maturity Rate as the risk-free rate. It is updated daily. The current risk-free rate is 3.982%. Please go to Economic Indicators page for more information. Please note that we use the 10-Year Treasury Constant Maturity Rate of the country/region where the company is headquartered. If the data for that country/region is not available, then we will use the 10-Year Treasury Constant Maturity Rate of the United States as default.
b) Beta is the sensitivity of the expected excess asset returns to the expected excess market returns. Massivit 3D Printing Technologies's beta is 1.6976.
c) (Expected Return of the Market - Risk-Free Rate of Return) is also called market premium. GuruFocus requires market premium to be 6%.
Cost of Equity = 3.982% + 1.6976 * 6% = 14.1676%
3. Cost of Debt:
GuruFocus uses latest TTM Interest Expense divided by the latest one-year semi-annual average debt to get the simplified cost of debt.
As of Dec. 2025, Massivit 3D Printing Technologies's interest expense (positive number) was ₪1.181 Mil. Its total Book Value of Debt (D) is ₪1.4007 Mil.
Cost of Debt = 1.181 / 1.4007 = 84.315%.
4. Multiply by one minus TTM Tax Rate:
GuruFocus uses the most recent TTM Tax Expense divided by the most recent TTM Pre-Tax Income to calculate the tax rate. The calculated TTM tax rate is limited to between 0% and 100%. If the calculated tax rate is higher than 100%, it is set to 100%. If the calculated tax rate is less than 0%, it is set to 0%.
The latest calculated TTM Tax Rate = 0.106 / -29.272 = -0.36%, which is less than 0%. Therefore it's set to 0%.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Massivit 3D Printing Technologies (XTAE:MSVT) has a WACC % of 17.16% as of Jul. 09, 2026. The weighted average cost of capital (WACC) is the average rate a company pays to finance assets. View historical data on Massivit 3D Printing Technologies and its competitors. This is 49% above median its historical median of 11.51. Over the past decade, Massivit 3D Printing Technologies' WACC % has ranged from 9.26 to 51.99. According to the industry distribution chart, Massivit 3D Printing Technologies ranks #2381 out of 2509 companies in the Hardware industry, placing it in the top 94.9%.
Is Massivit 3D Printing Technologies' WACC % too high?
Massivit 3D Printing Technologies' current WACC % of 17.16% is 49% above median its 10-year median of 11.51. Over the past 10 years, this metric has ranged from a low of 9.26 to a high of 51.99. The Hardware industry median WACC % is 8.23. Massivit 3D Printing Technologies' value of 17.16% is 108.5% above this industry median. Based on the distribution chart, Massivit 3D Printing Technologies ranks #2381 out of 2509 companies in the Hardware industry, which is in the bottom quartile relative to peers. Overall, Massivit 3D Printing Technologies has a GF Score™ of 61/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Massivit 3D Printing Technologies' WACC % compare to SNDK and DELL?
According to the Hardware industry distribution chart, Massivit 3D Printing Technologies ranks #2381 out of 2509 companies for WACC %. This places Massivit 3D Printing Technologies in the lower half of its industry. The industry median WACC % is 8.23. Massivit 3D Printing Technologies' value of 17.16% is 108.5% above this benchmark. Historically, Massivit 3D Printing Technologies' own WACC % has ranged from 9.26 to 51.99 over the past decade. While the company's 10-year median is 11.51 vs. the industry median of 8.23, Massivit 3D Printing Technologies has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good WACC % for a Hardware company?
The median WACC % among Hardware companies is 8.23, based on 2,509 companies in the industry. Companies in the top quartile (top 25%) have a WACC % significantly above this median, while those in the bottom quartile fall well below. However, WACC % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Massivit 3D Printing Technologies's current WACC % of 17.16% is 108.5% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high WACC % mean?
A high WACC % can signal that a stock is expensive relative to its fundamentals. The weighted average cost of capital (WACC) is the average rate a company pays to finance assets. View historical data on Massivit 3D Printing Technologies and its competitors. For the Hardware industry, the median WACC % is 8.23 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Massivit 3D Printing Technologies's current WACC % is 17.16%, which is 49% above median its own 10-year median of 11.51. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Massivit 3D Printing Technologies stock overvalued right now?
Based on GuruFocus' analysis, Massivit 3D Printing Technologies (XTAE:MSVT) is currently considered Modestly Undervalued. The stock's GF Value™ is ₪1.07, compared to a current price of ₪0.93 — trading 12.7% below its estimated fair value. The current WACC % is 17.16%, which is 49% above median its 10-year median of 11.51 and 108.5% above the Hardware industry median of 8.23. Massivit 3D Printing Technologies' overall GF Score™ is 61/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is WACC % calculated?
WACC % is calculated from a company's financial statements. For Massivit 3D Printing Technologies (XTAE:MSVT), the current WACC % is 17.16% as of Jul. 09, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Massivit 3D Printing Technologies (XTAE:MSVT) Overvalued in 2026?
Based on GuruFocus' analysis, Massivit 3D Printing Technologies stock appears to be undervalued.
The current stock price of ₪0.93 is trading 12.7% below its estimated GF Value™ of ₪1.07.
GuruFocus considers Massivit 3D Printing Technologies to be Modestly Undervalued.
Key valuation signals for XTAE:MSVT:
WACC %: 17.16% (49% above median its 10-year median of 11.51)
GF Value™: ₪1.07 vs. price of ₪0.93 (12.7% below fair value)
Industry Position: 108.5% above the Hardware median (#2381 of 2509)
No single metric tells the full story. See the XTAE:MSVT stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Massivit 3D Printing Technologies Business Description
Massivit 3D Printing Technologies Ltd is engaged in providing 3D printing solutions for the Engineering, Visual Communications, Entertainment, Academia, Interior Design, and Architectural markets.
61GF Score
Get the complete analysis for XTAE:MSVT
WACC % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
XTAE:MSVT has been successfully added to your 
